GB/T 14767-1993 Test method for thickness reduction of carpets after prolonged, heavy static loads
time:
2024-08-09 06:56:48
- GB/T 14767-1993
- Abolished
Standard ID:
GB/T 14767-1993
Standard Name:
Test method for thickness reduction of carpets after prolonged, heavy static loads
Chinese Name:
地毯在长时间、重静负载后厚度减少的试验方法
Standard category:
National Standard (GB)
-
Date of Release:
1993-01-02 -
Date of Implementation:
1994-10-01 -
Date of Expiration:
2007-09-29
Standard ICS number:
Textile and leather technology>>Textile products>>59.080.60 Floor coveringsChina Standard Classification Number:
Textiles>>Textile Products>>W56 Blankets
alternative situation:
Adjusted to QB/T 2791-2006Procurement status:
=ISO 3416-86
publishing house:
China Standards PressISBN:
155066.1-10611Publication date:
2004-08-12
Review date:
2004-10-14Drafting Organization:
Tianjin Carpet Research InstituteFocal point Organization:
National Carpet Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Light Industry Federation
Skip to download
Summary:
This standard specifies the test method for the reduction in thickness of carpets after long-term, heavy static loads. This standard applies to all carpets of the same thickness and structure. This standard does not apply to carpets with more than one thickness or structure at the same time, unless different thickness or structure areas can be tested separately. GB/T 14767-1993 Test method for the reduction in thickness of carpets after long-term, heavy static loads GB/T14767-1993 standard download decompression password: www.bzxz.net
- Recommended standards
- QB/T 2178-1995 Internal gearshift rear axle for bicycles
- JB/T 1035-2002 Technical specification for manufacturing copper air separation equipment
- JB/T 7890-1999 Fan coal mill
- GB 16556-1996 Self-contained air breathing apparatus
- GB 6245-1998 Fire pump performance requirements and test methods
- GB/T 2855.12-1990 Die sliding guide die seat intermediate guide column circular lower die seat
- GB/T 13217.5-2008 Test method for initial dryness of liquid ink
- JB/T 4729-1994 Spinning Head
- JB/T 7780.5-1995 Test Method for Mechanical and Physical Properties of Wire for Rivet Contacts
- GB 2700-1987 Acceptance regulations for jute yarn and thread
- GA/T 496-2004 General technical requirements for automatic red light violation recording systems
- GB 4064-1983 Guidelines for safety design of electrical equipment
- SL/T 153-1995 Technical Specification for Low-pressure Pipeline Water Supply Irrigation Project (Part of Well Irrigation Area) SL/T 153-95
- SC/T 9010-2000 渔港总体设计规范
- GB 15931-1995 Test methods for smoke exhaust fire dampers
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com