JB/T 2099-1977 Welded pipe joints
time:
2024-08-12 09:16:18
- JB/T 2099-1977
- Abolished
Standard ID:
JB/T 2099-1977
Standard Name:
Welded pipe joints
Chinese Name:
焊接式管接头接管
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-10-01 -
Date of Implementation:
1977-10-01 -
Date of Expiration:
2005-11-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 995-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2099-1977 Welded pipe joints JB/T2099-1977 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Department of the People's Republic of China for welding pipe joints
Cx35°
Marking example:
Pipe joints with an outer diameter of 28mm
Tie 28JB2099-77
The First Machinery Industry Department of the People's Republic of China issued the First Machinery Industry Department Standardization Research Institute proposed 434
The remaining 3
JB2099-77
JB995--67
Replace B980--87
Implemented on May 1, 1977
Jinan Foundry Pressing Machinery Research Institute drafted the outer diameter of the pipebzxZ.net
Nominal size
JB2099-77
Technical conditions are in accordance with the provisions of JB100377.
Nominal size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Cx35°
Marking example:
Pipe joints with an outer diameter of 28mm
Tie 28JB2099-77
The First Machinery Industry Department of the People's Republic of China issued the First Machinery Industry Department Standardization Research Institute proposed 434
The remaining 3
JB2099-77
JB995--67
Replace B980--87
Implemented on May 1, 1977
Jinan Foundry Pressing Machinery Research Institute drafted the outer diameter of the pipebzxZ.net
Nominal size
JB2099-77
Technical conditions are in accordance with the provisions of JB100377.
Nominal size
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JJG 1039-2008 Verification Regulation of Shore D Durometer
- GB/T 3749.2-1983 Compression fitting bulkhead right angle connector
- JB/T 3411.123-1999 Dimensions of quick-change end milling cutter bars
- GB/T 5634.1-1985 Flared combined right angle tee pipe joint
- CB/T 3539-1994 Technical requirements for repair of connecting rod bushings and piston pin bushings for marine diesel engines
- JB/T 10285-2001 Food vacuum freeze drying equipment
- JB/T 9162.44-1999 Comparative instrument rack dimensions
- JB/T 3259-1991 Type and size of enclosed glow plugs
- GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability)
- GB/T 17556-1998 Sheath materials for marine power and communication cables
- GB/T 3286.9-1998 Chemical analysis methods for limestone and dolomite - Determination of carbon dioxide content
- JB/T 9162.3-1999 Dimensions of I-shaped gauge base
- GB/T 4470-1998 Terminology for flame emission, atomic absorption and atomic fluorescence spectrometry
- HG/T 2233-1991 Acetal copolymer resin
- GB/T 18751-2002 Magnetic anti-counterfeiting printing ink
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com