JB/T 8854.1-2001 GCLD type drum gear coupling

JB/T 8854.1—2001 JB/T 8854.1-2001 GCLD type drum gear coupling JB/T8854.1-2001 Standard download decompression password: www.bzxz.net

[CS 21.120.20
Machinery Industry Standard of the People's Republic of China
JB/T8854.1-2001
GCLD type drum gear coupling
Curved tooth coupling GcEr
2001-09-03 Issued
China Machinery Industry Federation
2001-12-01 Implementation
JB/T8854.1—2001
This standard is a revision of JB54,1—CL type station gear coupling. The main differences between this standard and JBT8854.1-1999 in terms of technical requirements are: the C, A, and self values ​​of GCLD drum gear couplings have been adjusted; the technical requirements, test methods, inspection rules, specifications, packaging and storage of GCLD drum gear couplings have been added: the specific gravity has been increased by 15%~20% compared with the original standard. This standard replaces JB/T8854.1-1999 from the date of implementation. This standard was proposed and approved by the Technical Committee for Standardization of Metallurgical Equipment of the Machinery Industry. The drafting unit of this standard: China Third Heavy Aircraft Corporation. The additional drafting units of this standard: Erzhiji Ship Parts Factory, Xi'an Machinery Research Institute, Gongzhou Coupling Factory. The main contributors of this standard: Yue Guangfa, Zhao Baozi. The previous versions of the standards replaced by this standard are: 2B9012-1989, 3B8854.1-1999. 1 Scope
Machinery Industry Standards of the People's Republic of China
GCLD type drum gear coupling
Curvedtooth coupling CCLI
JB8854.1-2001
Replacement JB/T R854.1=1994
This standard defines the type, basic data, main dimensions, technical requirements, test methods, inspection specifications, marking, packaging and maintenance of CLD type gear couplings. This standard is applicable to CLD type gear couplings that connect motors and mechanical axis transmission systems and have the function of angular compensation for relative displacement of the two axes. The working environment condensation is -20~+50%, and the transmission torque is 1.12~50kN·m2. Reference standardsbZxz.net
The following standards contain provisions that constitute standard provisions by reference in this standard. When this standard is published, the versions shown are not valid and all other standards will be revised. Parties using this standard should explore the possibility of using the latest version of the following standards. GH3852—1997 Coupling shaft hole and connection dimensions J4.2—2001 GICL type, GICLZ type coupling 3 types, basic parameters and main dimensions
3.1 GCLD type coupling types, basic parameters and dimensions should conform to the provisions of Figure 1 and Table |.Y
China Machinery Industry Federation 2001-09-03 approved
2001-12-01 implementation
JB.T8854.1-200
szizoo
sh0n s8“08
S6 n6\s808
*59 *ty *6y
'os 'st
JB/T884.1-2000
SOFS'LS
202252
291: 22
0821095
s2 *ozt *o1l *001
2100n0
5610658-0%
o1on00
L“*9
059 yuan
JB/T 8854.1-2001
3.2GCLD type drum female coupling shaft hole and keyway type and size shall be in accordance with GBT3852. The keyway types are: A, B, B, C, D; the shaft hole combinations are: Y, Y, B, C, D, J, J, Y:
3.3 Marking
The marking of GCLD type drum gear coupling shall comply with the provisions of GBT52. Marking examples
Example 1: GCLD5 type drum type coupling
Driving end: Y-type shaft hole, A-type key, d,=$5mm, L=112mm: Driven end: J, type shaft hole, B, type key, d=60mm, I-10m GCLD5 type drum gear coupling: GCLDS contactor_55x112
J,B,60×107
Example 2: (C[.D9 type drum gear coupling
JB/T8834.1--2001
driving disc: 7. type shaft hole, C type chain groove, d-100mm, L-167mm; driven end: I, type auxiliary hole, A type chain groove, d-120mm, [=167mm GCl.D9 type drum gear coupling: GCLD9 coupling ZC100×167||tt ||J120×167
4 Technical requirements
58854.1200
0 Technical requirements for CLD drum gear couplings shall comply with the provisions of Section 1 of JB/8854.2-2001, and the lubricating grease for the shaft assembly shall comply with the provisions of this standard.
5 Test methods
The test force method for couplings shall comply with Section 5 of JBT8542. Inspection rules
The inspection rules for couplings shall comply with Section 6 of JBT542. Marking, packaging and storage
The marking, packaging and storage of couplings shall comply with the provisions of Chapter 7 of JB88342. 8 Selection and calculation of GCLD drum gear couplings The selection and calculation of GCLD ratio drum gear couplings shall comply with the provisions of Appendix A of JB/T8854.2, and the condition coefficient shall comply with the provisions of Appendix B.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.