QB/T 2212.20-1996 Construction tools (bricklaying tools) Brick axe

This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of brick axes. This standard applies to No. 311 brick axes specified in QB/T 2212.1 "Terms of Construction Tools (Brick and Brick)". QB/T 2212.20-1996 Construction Tools (Brick and Brick) Brick Axe QB/T2212.20-1996 Standard download decompression password: www.bzxz.net

QB/T 2212.20 --1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002-1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into the light industry standard. In the overall structure of the standard, the terminology of construction tools, general technical conditions and their product standards are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are merged into the general technical conditions. The product standards are retained according to the numbers in the terminology, and a "diamond shovel" product standard is added. This standard changes the word "bricks and tiles" in the original name brackets to "bricks and tiles", and puts it behind the standard name "construction tools", so that the hand tools used in construction operations are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terminology and general technical conditions are based on it. The technical content in the original standard that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ47001~47003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian Housing Equipment Tool General Factory, Shanghai Fengxian Tool Factory No. 3, etc.
The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool and Hardware Standardization Center for interpretation. 641
1 Scope
Light Industry Standard of the People's Republic of China
Construction Tools (Masonry)
Brick Axe
QB/T 2212.20--1996
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of brick axes. This standard applies to No. 311 brick axe specified in QB/T2212.1 "Terms of Construction Tools (Masonry)". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1-1996 Terminology of Construction Tools (Brickwork) QB/T2212.2—1996 General Technical Conditions for Construction Tools (Brickwork) 3 Product Classification
3.1 Type
The type of brick axe is shown in Figure 1.
3.2 Main Dimensions
The main dimensions of brick axe shall be in accordance with the provisions of Table 1. Table 1 Main Dimensions
Head Side Length
Limit Deviation
Note: Special types and other dimensions may not be restricted by this table. 4 Technical Requirements
Limit Deviation
Body Blade Width
2—1996 Provisions of Chapter 4.
Technical requirements for brick-making axes shall be in accordance with QB/T2212.2
Approved by China Light Industry General Association on 1996-03-22
TTiKAoNi KAca-
Limit deviation
Axe side length
Limit deviation
Implemented on 1996-12-01
5Test methodswwW.bzxz.Net
1Dimension inspection
Measured with universal measuring tools.
2Inspection of other items
QB/T2212.201996
Carry out according to the provisions of Chapter 5 of QB/T2212.2-1996. 6
Inspection regulations
According to the provisions of Chapter 6 of QB/T2212.2-1996. Packaging, marking, transportation and storage
shall be in accordance with the provisions of Chapter 7 of QB/T2212.2-1996. 643
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.