
GB/T 14764-1993 Hand hacksaw blades
time:
2024-08-09 06:59:29
- GB/T 14764-1993
- in force
Standard ID:
GB/T 14764-1993
Standard Name:
Hand hacksaw blades
Chinese Name:
手用钢锯条
Standard category:
National Standard (GB)
-
Date of Release:
1993-01-02 -
Date of Implementation:
1994-10-01
Standard ICS number:
Mechanical Manufacturing >> 25.140 Hand ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J47 Hand Tools
alternative situation:
Replaced by GB/T 14764-2008
Release date:
1993-12-21Review date:
2004-10-14Drafting Organization:
"Hand hacksaw blade" standard drafting groupFocal point Organization:
National Technical Committee for Standardization of Hardware ProductsPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Light Industry Federation

Skip to download
Summary:
This standard specifies the terminology, product classification, technical requirements, test methods and inspection rules and marking, packaging, transportation and storage of hand hacksaw blades. This standard applies to hand hacksaw blades (hereinafter referred to as saw blades). GB/T 14764-1993 Hand hacksaw blades GB/T14764-1993 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 8307-2002 Determination of soluble ash and insoluble ash of tea
- QB/T 2324-1997 Dehydration machine for garment machinery industry
- JB/T 6974-1993 Wire spraying of carbon steel and stainless steel
- SJ 2246-1982 Gas-filled microwave switching tubes,Type RX-202, RX-203
- JB/T 9169.1-1998 Process Management Guidelines General Principles
- GB/T 2678.4-1994 Pulp and paper zero-span tensile strength determination method
- SJ/T 10617-1995 Detail specification for electronic components-Fixed low-power non-wirewound fixed resistors-Type RT13 carbon film fixed resistors Assessment level E
- GB 19272-2003 Fitness equipment General safety requirements for outdoor fitness equipment
- SY/T 0318-1998 Technical standard for seismic isolation of petroleum floating equipment
- GBZ 40-2002 Diagnostic criteria for occupational acute dimethyl sulfate poisoning
- GB 3836.11-1991 Method for determination of maximum test safety clearance of explosion-proof electrical equipment for explosive environments
- JB/T 3073.1-1991 Technical specifications for die-forged moving and stationary blades and hot-rolled stationary blade blanks for steam turbines Die-forged stationary blade blanks
- GB 4208-1993 Shell protection level (IP code)
- GB/T 18816-2002 General technical requirements for marine heat exchangers
- GB 16727-1997 Prestressed concrete slabs for composite slabs GB16727-1997
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com