JB/T 5984-1992 Basic parameters of wide V-band continuously variable transmission device
time:
1992-07-17 15:00:00
- JB/T 5984-1992
- Abolished
Standard ID:
JB/T 5984-1992
Standard Name:
Basic parameters of wide V-band continuously variable transmission device
Chinese Name:
宽V带无级变速装置 基本参数
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1992-07-17 -
Date of Implementation:
1993-07-01 -
Date of Expiration:
2005-04-15
China Standard Classification Number:
Machinery>>General parts>>J18 chain drive, belt drive and key connection
Description (Translated English) / downloadSkip to download
Summary:
JB/T 5984-1992 Basic parameters of wide V-band continuously variable transmission JB/T5984-1992 Standard download and decompression password: www.bzxz.net
Standard contentSome standard content:
中华人民共和国机械行业标准
宽V带无级变速装置基本参数
主题内容与适用范围
JB/T 5984—92
本标准规定了适用于一般工业用宽V带传动无级变速装置的输入功率、中心距和变速范围等基本参数。
引用标准
GB12614—般工业用宽V带轮
3术语
变速范围变速装置输出轴的最高转速与最低转速之比。4基本参数
4.1输入功率bZxz.net
变速装置的输入功率按下列数值选取：0.55,0. 75,1.10,1.50,2. 20,3.00,4.00,5.50,7.50,11.00,15.00 kW4.2变速范围
变速装暨的变速范围按下列数值选取：2,00.2. 50.3. 15.4.00.5, 00.6.30.8, 00.10, 004.3中心距
变速装置的中心距按表中规定数值选取。mm
中心距國
注：系列1为优先选用系列。
5带轮基本尺寸
160,200.250.315.400,500.630
变速装置的带轮基本尺寸按GB12614的规定。6轴伸尺寸
变速装置输入轴和输出轴轴伸尺寸应符合有关轴伸标准的规定。附加说明：
本标推由机械电子工业部机械标准化研究所提出并归口。系
180.224.280,355,450,560
本标由机械电子工业部机械标准化研究所、天津轻工业学院负责起草。本标准起草人秦书安、李颖、黄文贵、沈浩，中华人民共和国机械电子工业部1992-07-17批准366
1993-07-01实施
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
宽V带无级变速装置基本参数
主题内容与适用范围
JB/T 5984—92
本标准规定了适用于一般工业用宽V带传动无级变速装置的输入功率、中心距和变速范围等基本参数。
引用标准
GB12614—般工业用宽V带轮
3术语
变速范围变速装置输出轴的最高转速与最低转速之比。4基本参数
4.1输入功率bZxz.net
变速装置的输入功率按下列数值选取：0.55,0. 75,1.10,1.50,2. 20,3.00,4.00,5.50,7.50,11.00,15.00 kW4.2变速范围
变速装暨的变速范围按下列数值选取：2,00.2. 50.3. 15.4.00.5, 00.6.30.8, 00.10, 004.3中心距
变速装置的中心距按表中规定数值选取。mm
中心距國
注：系列1为优先选用系列。
5带轮基本尺寸
160,200.250.315.400,500.630
变速装置的带轮基本尺寸按GB12614的规定。6轴伸尺寸
变速装置输入轴和输出轴轴伸尺寸应符合有关轴伸标准的规定。附加说明：
本标推由机械电子工业部机械标准化研究所提出并归口。系
180.224.280,355,450,560
本标由机械电子工业部机械标准化研究所、天津轻工业学院负责起草。本标准起草人秦书安、李颖、黄文贵、沈浩，中华人民共和国机械电子工业部1992-07-17批准366
1993-07-01实施
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 7240-1994 Technical requirements for main components of general reciprocating piston compressors
- GB 6829-1995 General requirements for residual current operated protective devices
- GB/T 14563-1993 Kaolin
- GB 16728-1997 Prestressed concrete ribbed roof panels GB16728-1997
- GB/T 31052.6-2016 Lifting appliances—Code of inspection and maintenance—Part 6:Cable cranes
- GB/T 2978-1997 Passenger car tire series
- GB/T 14533-1993 Technical requirements for wooden bookshelves and periodical racks for library supplies
- SY/T 5587.17-1993 Procedure for fishing ropes and other objects in routine well repair work for oil and water wells
- HG 20551-1993 Common calculation regulations for power design of chemical plants
- JB/T 3687.1-1999 Series of pedestal vibrating screens for mining
- JB/T 5824.1-1991 Classification and codes of special equipment for wires and cables
- QB 1771-1993 Ethyl propionate
- SJ/T 10586.3-1994 Technical data of Type DW-217 electronic glass
- GB/T 17302.2-2008 Import and export licences messages of the Peoples Republic of China - Part 2: Export licence message
- SJ 1.9-1987 Principles and procedures for return of submitted standards drafts for approval
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com