JB/T 3367.1-1999 Parameters of horizontal internal broaching machines

JB/T 3367.1-1999 This standard is a revision of JB 4076-85 "Parameters of horizontal internal broaching machines". During the revision, only the editorial modifications were made according to relevant regulations, and the main technical content was not changed. This standard is part of the JB/T 3367 "Horizontal internal broaching machine" series of standards, which includes the following three parts: JB/T 3367.1-1999 Parameters of horizontal internal broaching machines JB/T 3367.2-1999 Series of horizontal internal broaching machines JB/T 3367-1996 Technical conditions of horizontal internal broaching machines The standards supporting this standard are: GB/T 4680-1997 Accuracy inspection of horizontal internal broaching machines This standard specifies the parameters of horizontal internal broaching machines for general purposes. This standard is applicable to newly designed general-purpose horizontal internal broaching machines. This standard was first issued in July 1985. JB/T 3367.1-1999 Horizontal internal broaching machine parameters JB/T3367.1-1999 standard download decompression password: www.bzxz.net

ICS25.080.30
Machinery Industry Standard of the People's Republic of China
JB/T3367.1-1999
Horizontal internal broaching machine,
1999-05-20 issued
National Machinery Industry Bureau
2000-01-01 implementationwwW.bzxz.Net
JB/T3367.1-1999
This standard is revised on the basis of JB4076-85 "Horizontal internal broaching machine parameters". The technical content of this standard is consistent with that of JB4076-85, and it has only been re-edited according to relevant regulations. This standard is part of the JB/T3367 "Horizontal internal broaching machine" series of standards. This series of standards includes the following three parts: JB/T3367.1—1999
JB/T3367.2—1999
JB/T3367—1996
Horizontal internal broaching machine parameters
Horizontal internal broaching machine
Series
Horizontal internal broaching machine
Standards matching this standard include:
GB/T 4680—1997
Horizontal internal broaching machine
Technical conditions
Precision inspection
This standard replaces JB407685 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the National Technical Committee for Standardization of Metal Cutting Machine Tools, the Plug and Pull Planer Branch. The drafting unit of this standard is Changsha Machine Tool Factory. This standard was first issued in July 1985.
1 Scope
Machinery Industry Standard of the People's Republic of China
Day Parameters
Horizontal Internal Broaching Machine
This standard specifies the parameters of horizontal internal broaching machines for general purposes. This standard applies to newly designed horizontal internal broaching machines for general purposes. 2 Parameters
The type of horizontal internal broaching machine is shown in Figure 1. The parameters of the machine tool shall comply with the provisions of Table 1. Figure 1
Rated pulling force F
Working stroke S
Approved by the State Machinery Industry Bureau on 1999-05-20100
JB/T3367.1-1999
Replaced JB407685
Implemented on 2000-01-01
Mechanical industry standard
Parameters of horizontal internal broaching machine
JB/T3367.1-1999
Published and distributed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/4 Number of words 4000
Format 880×1230
First printing in June 1999
First edition in June 1999
Print run 1-500
Price 500 yuan
99-219
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.