- Location:
- Standard Download >>
- Light Industry Standard (QB) >>
- QB/T 2175.6-1995 Copy Gong

QB/T 2175.6-1995 Copy Gong
time:
2024-08-07 14:53:23
- QB/T 2175.6-1995
- in force
Standard ID:
QB/T 2175.6-1995
Standard Name:
Copy Gong
Chinese Name:
抄锣
Standard category:
Light Industry Standard (QB)
-
Date of Release:
1995-10-24 -
Date of Implementation:
1996-06-01
China Standard Classification Number:
Light Industry, Culture and Living Goods>>Culture, Education, Sports and Entertainment Goods>>Y58 Musical Instruments
alternative situation:
ZB Y58002.6-89
Drafter:
Gao Yongcuo, Gao JianjunDrafting Organization:
Wuhan Gong FactoryFocal point Organization:
National Center for Musical Instrument StandardizationProposing Organization:
Quality Standards Department of China Light Industry FederationPublishing Department:
China Light Industry Federation

Skip to download
Summary:
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of the Chaoluo. This standard applies to the Chaoluo, a brass-bodied musical instrument. QB/T 2175.6-1995 Chaoluo QB/T2175.6-1995 Standard download decompression password: www.bzxz.net

Some standard content:
Light Industry Industry Standard of the People's Republic of China
Subject content and scope of application
QB/T2175.6—1995
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of the gong. This standard applies to the gongs in brass-bodied sounding instruments. 2 Reference standards
QB/T2175.1 General technical conditions for brass-bodied sounding instruments 3 Product classification
The gongs are divided into small gongs, medium gongs and large gongs. 3.1
3.2 The specifications of the gongs shall comply with the provisions of Table 1. Table 1
Outer diameter, mm
Small gongsWww.bzxZ.net
Medium gongs
Large gongs
4 Technical requirements
Basic dimensions
4.1 The main tone characteristics shall comply with the provisions of Table 2. Approved by China Light Industry General Association on October 24, 1995
Limit deviation
Mass, kg
1.45~1.85
1.75~2.15
2.15~2.75
2.95~3.55
3.80~4.50
4.95~6.55
6. 00~~8. 00
7.20~9.80
8.50~11.50
10.30~13.70
13.30~~16.70
15. 10~18. 90
17.50~21.50
1996-06-01 implementation
Small copy gong
Medium copy gong
Large copy gong
QB/T 2175. 6-1995
Appearance quality and other technical requirements shall comply with the provisions of QB/T2175.14.2
5Test method
Should comply with the provisions of QB/T2175.1.
6Inspection rules
Should comply with the provisions of QB/T2175.1.
Marking, packaging, transportation, storage
Should comply with the provisions of QB/T2175.1.
Additional remarks:
This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Musical Instrument Standardization Center. This standard was drafted by Wuhan Gong Factory.
The main drafters of this standard are Gao Yongquan and Gao Jianjun. Main sound characteristics
Play the kuang sound, deep and thick
Play the kua sound, deep and thick
Play the duang sound, deep and thick
From the date of implementation of this standard, the professional standard ZBY58002.6-1989 "Chao Luo" issued by the former Ministry of Light Industry will be invalid. -riKAoNiKAca-
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Subject content and scope of application
QB/T2175.6—1995
This standard specifies the product classification, technical requirements, test methods, inspection rules and marking, packaging, transportation, storage, etc. of the gong. This standard applies to the gongs in brass-bodied sounding instruments. 2 Reference standards
QB/T2175.1 General technical conditions for brass-bodied sounding instruments 3 Product classification
The gongs are divided into small gongs, medium gongs and large gongs. 3.1
3.2 The specifications of the gongs shall comply with the provisions of Table 1. Table 1
Outer diameter, mm
Small gongsWww.bzxZ.net
Medium gongs
Large gongs
4 Technical requirements
Basic dimensions
4.1 The main tone characteristics shall comply with the provisions of Table 2. Approved by China Light Industry General Association on October 24, 1995
Limit deviation
Mass, kg
1.45~1.85
1.75~2.15
2.15~2.75
2.95~3.55
3.80~4.50
4.95~6.55
6. 00~~8. 00
7.20~9.80
8.50~11.50
10.30~13.70
13.30~~16.70
15. 10~18. 90
17.50~21.50
1996-06-01 implementation
Small copy gong
Medium copy gong
Large copy gong
QB/T 2175. 6-1995
Appearance quality and other technical requirements shall comply with the provisions of QB/T2175.14.2
5Test method
Should comply with the provisions of QB/T2175.1.
6Inspection rules
Should comply with the provisions of QB/T2175.1.
Marking, packaging, transportation, storage
Should comply with the provisions of QB/T2175.1.
Additional remarks:
This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Musical Instrument Standardization Center. This standard was drafted by Wuhan Gong Factory.
The main drafters of this standard are Gao Yongquan and Gao Jianjun. Main sound characteristics
Play the kuang sound, deep and thick
Play the kua sound, deep and thick
Play the duang sound, deep and thick
From the date of implementation of this standard, the professional standard ZBY58002.6-1989 "Chao Luo" issued by the former Ministry of Light Industry will be invalid. -riKAoNiKAca-
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 7286-1994 Test method for complete set of cottonseed foam acid delinting equipment
- CJJ 43-1991 Hot mix recycled asphalt pavement construction and acceptance regulations
- GB 9656-1996 Safety glass for automobiles
- GB 19510.1-2004 Lighting control devices Part 1: General requirements and safety requirements
- SY/T 0601-1997 Determination of emulsified oil and dissolved oil in water
- GB/T 4678.15-2003 Die casting parts Part 15: Gaskets
- JB/T 6939.1-1993 Technical requirements for controllers for small wind turbine generator sets
- SJ 20635-1997 Micro-area test method for residual impurity concentration in semi-insulating gallium arsenide
- GB/T 3955-1983 Electrical round aluminum wire
- GB/T 35425-2017 Classification and coding of bulk materials for road and bridge construction
- GB/T 9104.3-1988 Test method for industrial stearic acid - Determination of acid value
- GB/T 5258-1995 Test method for compression properties of fiber reinforced plastic thin layer sheets
- GB/T 2441.9-2001 Determination of urea - Determination of methylene diurea content - Spectrophotometric method
- JB/T 5298-1991 Steel flat gate valve for pipeline
- HG 20612-1997 Metal ring gaskets for steel pipe flanges (European system)
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com