JB/T 3106-1999 Vertical single-spindle woodworking drilling machine parameters

JB/T 3106-1999 This standard is a revision of JB 3106-82 "Vertical Single-spindle Woodworking Drilling Machine Parameters". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of vertical single-spindle woodworking drilling machines. This standard is applicable to vertical single-spindle woodworking drilling machines suitable for general purposes. This standard was first issued on May 12, 1982. JB/T 3106-1999 Vertical Single-spindle Woodworking Drilling Machine Parameters JB/T3106-1999 Standard download decompression password: www.bzxz.net

ICS79.120.10
Machinery Industry Standard of the People's Republic of China
JB/T3106—1999
Vertical Single-spindle Woodworking Drilling Machine
Published on May 14, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3106—1999
This standard is a revision of JB310682 "Vertical Single-spindle Woodworking Drilling and Milling Machine Parameters". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged.
This standard replaces JB3106-82 from the date of implementation. Appendix A of this standard is a prompt appendix.
This standard was proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Cutting Tools. This standard is under the jurisdiction of Fuzhou Woodworking Machine Tool Research Institute. The responsible drafting unit of this standard: Mudanjiang Woodworking Machinery Factory. Main drafters of this standard: Dong Yanwen, Luan Jingkun This standard was first issued on May 12, 1982. 1
Machinery Industry Standard of the People's Republic of China
Vertical Single-spindle Woodworking Drilling Machine
This standard specifies the parameters of vertical single-spindle woodworking drilling machines. This standard applies to general-purpose vertical single-spindle woodworking drilling machines (hereinafter referred to as woodworking drilling machines). Parameters
JB/T3106—1999
Replaces JB310682
The type of woodworking drilling machine is shown in Figure 1 (without limiting the specific structure), and the parameters should comply with the provisions of Table 1. Figure 1 Simple diagram of vertical single-spindle woodworking drilling machineWww.bzxZ.net
Table 1 Main parameters of woodworking drilling machine
Main parameter name
Maximum drilling diameter
Approved by the State Machinery Industry Bureau on 1999-05-1412
Implementation on 2000-01-01
JB/T3106-1999
Appendix A
(Suggestive appendix)
Other basic parameters of vertical single-spindle woodworking drilling machine Other basic parameters of vertical single-spindle woodworking drilling machine are shown in Table A1. Table AI
Parameter name
Maximum drilling diameter
Maximum drilling depth
Maximum groove length
Maximum groove depth
Maximum distance L between the spindle end face and the worktable surfaceMaximum distance between the spindle center line and the machine column surfaceSpindle speed
≥2800
Mechanical industry standard
Vertical single-spindle woodworking drilling machine
JB/T3106—1999
Mechanical Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2, Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing sheet 1/2 Word count 6.000
Format 880×1230
First printing in August 1999
First edition in August 1999
Print run 1-500
Price 500 yuan
99-367
66690 /
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.