INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3668.13-1983 Dimensions of flanges and end drive keys for mounting multi-axis boxes on common components of modular machine tools

time: 2024-08-10 21:05:45
  • GB/T 3668.13-1983
  • in force

Basic Information

standard classification number

  • Standard ICS number:

    Mechanical Manufacturing >> 25.060 Machine Tool Devices

  • China Standard Classification Number:

    Machinery>>Metal Cutting Machine Tools>>J58 Combined Machine Tools

associated standards

  • Procurement status:

    =ISO 3476-75

Publication information

Other Information

  • Release date:

    1983-05-09

  • Review date:

    2004-10-14

  • Drafting Organization:

    Dalian Modular Machine Tool Institute

  • Focal point Organization:

    National Technical Committee for Metal Cutting Machine Tools Standardization

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 3668.13-1983 Dimensions of flanges and end face transmission keys for mounting multi-axis boxes on common components of modular machine tools GB/T3668.13-1983 Standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China bZxz.net
Common components for modular machine tools
Flanges and end drive keys for mounting multi-axis boxes
Modular ualits for machise tool constructlon-Tenon drives and flanges for mounting multi-splndle heads-Dimensions This standard is equivalent to IS03476-1975 "Common components for modular machine tools - UDC 621.9--28
GB 8668.1--88
IS0 3476-1975
-Flanges and end drive keys for mounting multi-axis boxes". When this standard is adopted as equivalent, the dimensions of flanges and end drive keys for mounting multi-axis boxes with a nominal diameter of the drive shaft of 20 mm are added. 1 Scope
This standard specifies the interchangeable dimensions of flanges and end face transmission keys for mounting multi-axis boxes of the following common parts of modular machine tools: Sleeve-fed drilling heads!
Sleeve-fed drilling heads with adjustable slides for tool change. 2 Dimensions
The dimensions shall comply with the provisions of the following figures and tables. Issued by the State Bureau of Standards on May 9, 1988
Implemented on March 1, 1984
Nominal diameter of drive shaft
Additional notes:
Match diameter
Bolt hole distribution circle diameter
GB3668.13-83
Outer diameter
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China. This standard was drafted and managed by the Dalian Modular Machine Tool Research Institute of the Ministry of Machinery Industry. The main drafter of this standard was Cao Weiqian.
Screw size matching the through hole d
Bolt size
Drive key width
Drive key length
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]