JB/T 106-1978 Valve marking and identification painting

JB/T 106-1978 Valve marking and identification paint JB/T106-1978 Standard download and decompression password: www.bzxz.net

Standard of the First Machinery Industry Department of the People's Republic of China
Valve Marking and Identification Paint
JB106-78
Beijing
Standard of the First Machinery Industry Department of the People's Republic of China
Valve Marking and Identification Paint
This standard applies to valves in industrial pipelines and equipment. 1. Marking content:
(1) Nominal pressure (or working pressure), (2) Nominal diameter:
(3) Arrow of medium flow direction
(4) Factory name or factory logo of the manufacturer
JB 106-78
Replacement JB106-59
(5) Other marks: such as special valves or standard numbers, drawing numbers, special material grades, melting furnace numbers, etc. according to user requirements.
2. Marking method:
(1) Casting method
(2) Stamping method.
3. Marking position,
(1) Nominal pressure (or working pressure), nominal diameter and arrow should be marked on the front of the vertical center line of the valve body in the combination style specified in Table 1. Table 1
Direction of medium flow
The flow direction of medium inlet and outlet is on the same or parallel center line
Straight-through type
Issued by the First Machinery Industry Ministry of the People's Republic of China Proposed by Hefei General Machinery Research Institute
Marking style with nominal pressure
Marking style with working pressure
Ps4lon
October 1, 1978
Implemented
Drafted by Hefei General Machinery Research Institute
Total 6 pages Page 2
Direction of medium flow
JB 106—78
Use nominal pressure to mark the style
The medium flows upward from the bottom of the valve disc
The medium inlet and outlet flow in a 90° angle
Angle style
The medium flows downward from the top of the valve group
The medium flows from the inlet to the two outlets at the same time to form a "T" shape
Three-way style|| tt||The flow direction of the medium outlet is in the shape of " "
Continued Table 1
Style marked with working pressure
Ps4lna
Ps4lan
Note: ① Valves where the medium can flow in any direction do not need to be marked with arrows (such as gate valves, ball valves, plug valves, etc.). ② The square end face of the ball valve, butterfly valve stem and plug valve plug should have an indicator line to indicate the channel position. ③ The nominal diameter is below the arrow in the style. (2) The manufacturer's name or factory logo should be marked in a place that is easy to see, such as the valve body, valve cover (bracket), handle, wrench, handwheel spoke and other parts. (3) Other marks shall be marked on the back of the valve body or other locations. JB106-78
Total 6 pages Page 3bzxz.net
4. The marks shall be obvious, clear, neatly arranged and symmetrical. The font shall be straight, round or square.
(1) The dimensions of the casting marks shall be in accordance with the following diagram and Table 2, and shall be made into a convex surface. BtfBtttBBh
font size
Table 2
7||t t||9
①L, L1, L2, L3 dimensions are allowed to be arranged according to the nominal pressure value and the design can be changed. Note: When no arrow is marked, dimension "H" shall be as specified for "H2". ③ When the number is "1", the dimension "B" shall be in accordance with the provisions of "a". Total 6 pages Page 4
JB 106-78
(2) The dimensions of the embossed mark shall be in accordance with the provisions of Table 3. The arrow size shall be specified in the design drawing. mm
Character
Numbers and letters
Height
Width (except D and M)
Distance between characters
Width of letters D and M
Depth of embossing
7| |tt||10
Table 3
14|| tt||10
(3) The font size of each product logo can be selected according to Table 4, or according to the specific product appearance The size is specified by the design drawing.
Nominal diameter
Casting
Table 4
≤10|15~25|3250|65~100|125~200250~300|350~450|500~7001200
embossed
5. The outer surface of the valve should be painted before leaving the factory. The paint layer should be durable and beautiful, and the marking should be clear and visible. (1) The product is identified and painted according to the valve body material, and its color is as specified in Table 5. Table 5
Valve body material
ductile iron
carbon steel
fruit film
alloy steel||tt| |Note: Acid-resistant steel and stainless steel are allowed without painting. ②Copper alloy is not painted.
Identify Paint Color
Silver
Medium Gray
Sky Blue||tt ||Medium blue
JB 106-78
Page 5 of 6
(2) In order to indicate the material of the product sealing surface, it should be on the transmission handwheel, handle or The paint on the board should be identified, and its color should be as specified in Table 6.
Table 6
Sealing surface material
Copper alloy
Babbitt
Tin-based bearing alloy (
Alloy||tt| |Resistant
penetration
nitrogen
steel
Carbide
Note, @
Identify the paint color
Big red
Light yellow
Sky blue
Sky blue
Sky blue
Sealing surface material
Monel Alloy
plastic
rubber
material
valve seat and opening and closing parts sealing surface When the materials are different, paint according to the low hardness material. Identify the paint color
dark yellow
purple
medium green
check valve , painted on the top of the valve cover; the safety valve, pressure reducing valve, and drain valve are painted on the valve cover or valve cap. (3) The painting color of the transmission mechanism shall be as follows: & Electric device: Normal type. Gray, three-in-one (outdoor, explosion-proof, anti-corrosion) type is painted in sky blue. b. Pneumatic, hydraulic, gear transmission and other transmission mechanisms are painted with the same product. (4) The paint color can be changed according to user ordering requirements. . Page 6 of 6
Appendix
Silver
Medium Gray
Sky Blue
Medium Green||tt| |Black blue blue
JB 106---78
Paint color sample
Light yellow
Dark yellow
Big red||tt| |Purple red
Medium blue
Standards of the First Ministry of Machinery Industry of the People's Republic of China
Department
Valve marking and identification paint
JB 106— 78
Published by Technical Standard Press
(Beijing Fuwai Sanlihe)
Printed by Taihuangdao City Printing Factory
Published by Xinhua Bookstore in Beijing Published
Distributed by Xinhua Bookstores in various places
Format 850×11681/32
Printed sheet 1/4 Insert 1 word count 7,000
1979 7 First edition of month
First printing in July 1979
Print run 1-20,000
ISBN: 15169-2-3048
Price 0.10 yuan
embossed
5. The outer surface of the valve should be painted before leaving the factory. The paint layer should be durable and beautiful, and the marking should be clear and visible. (1) The product is identified and painted according to the valve body material, and its color is as specified in Table 5. Table 5
Valve body material
ductile iron
carbon steel
fruit film
alloy steel||tt| |Note: Acid-resistant steel and stainless steel are allowed without painting. ②Copper alloy is not painted.
Identify Paint Color
Silver
Medium Gray
Sky Blue||tt ||Medium blue
JB 106-78
Page 5 of 6
(2) In order to indicate the material of the product sealing surface, it should be on the transmission handwheel, handle or The paint on the board should be identified, and its color should be as specified in Table 6.
Table 6
Sealing surface material
Copper alloy
Babbitt
Tin-based bearing alloy (
Alloy||tt| |Resistant
penetration
nitrogen
steel
Carbide
Note, @
Identify the paint color
Big red
Light yellow
Sky blue
Sky blue
Sky blue
Sealing surface material
Monel Alloy
plastic
rubber
material
valve seat and opening and closing parts sealing surface When the materials are different, paint according to the low hardness material. Identify the paint color
dark yellow
purple
medium green
check valve , painted on the top of the valve cover; the safety valve, pressure reducing valve, and drain valve are painted on the valve cover or valve cap. (3) The painting color of the transmission mechanism shall be as follows: & Electric device: Normal type. Gray, three-in-one (outdoor, explosion-proof, anti-corrosion) type is painted in sky blue. b. Pneumatic, hydraulic, gear transmission and other transmission mechanisms are painted with the same product. (4) The paint color can be changed according to user ordering requirements. . Page 6 of 6
Appendix
Silver
Medium Gray
Sky Blue
Medium Green||tt| |Black blue blue
JB 106---78
Paint color sample
Light yellow
Dark yellow
Big red||tt| |Purple red
Medium blue
Standards of the First Ministry of Machinery Industry of the People's Republic of China
Department
Valve marking and identification paint
JB 106— 78
Published by Technical Standard Press
(Beijing Fuwai Sanlihe)
Printed by Taihuangdao City Printing Factory
Published by Xinhua Bookstore in Beijing Published
Distributed by Xinhua Bookstores in various places
Format 850×11681/32
Printed sheet 1/4 Insert 1 word count 7,000
1979 7 First edition of month
First printing in July 1979
Print run 1-20,000
ISBN: 15169-2-3048
Price: 0.10 yuan
embossed
5. The outer surface of the valve should be painted before leaving the factory. The paint layer should be durable and beautiful, and the marking should be clear and visible. (1) The product is identified and painted according to the valve body material, and its color is as specified in Table 5. Table 5
Valve body material
ductile iron
carbon steel
fruit film
alloy steel||tt| |Note: Acid-resistant steel and stainless steel are allowed without painting. ②Copper alloy is not painted.
Identify Paint Color
Silver
Medium Gray
Sky Blue||tt ||Medium blue
JB 106-78
Page 5 of 6
(2) In order to indicate the material of the product sealing surface, it should be on the transmission handwheel, handle or The paint on the board should be identified, and its color should be as specified in Table 6.
Table 6
Sealing surface material
Copper alloy
Babbitt
Tin-based bearing alloy (
Alloy||tt| |Resistant
penetration
nitrogen
steel
Carbide
Note, @
Identify the paint color
Big red
Light yellow
Sky blue
Sky blue
Sky blue
Sealing surface material
Monel Alloy
plastic
rubber
material
valve seat and opening and closing parts sealing surface When the materials are different, paint according to the low hardness material. Identify the painting color
dark yellow
purple
medium green
check valve , painted on the top of the valve cover; the safety valve, pressure reducing valve, and drain valve are painted on the valve cover or valve cap. (3) The painting color of the transmission mechanism shall be as follows: & Electric device: Normal type. Gray, three-in-one (outdoor, explosion-proof, anti-corrosion) type is painted in sky blue. b. Pneumatic, hydraulic, gear transmission and other transmission mechanisms are painted with the same product. (4) The paint color can be changed according to user ordering requirements. . Page 6 of 6
Appendix
Silver
Medium Gray
Sky Blue
Medium Green||tt| |Black blue blue
JB 106---78
Paint color sample
Light yellow
Dark yellow
Big red||tt| |Purple red
Medium blue
Standards of the First Ministry of Machinery Industry of the People's Republic of China
Department
Valve marking and identification paint
JB 106— 78
Published by Technical Standard Press
(Beijing Fuwai Sanlihe)
Printed by Taihuangdao City Printing Factory
Published by Xinhua Bookstore in Beijing Published
Distributed by Xinhua Bookstores in various places
Format 850×11681/32
Printed sheet 1/4 Insert 1 word count 7,000
1979 7 First edition of month
First printing in July 1979
Print run 1-20,000
ISBN: 15169-2-3048
Price: 0.10 yuan
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.