Test method for drying time of film formation of printing inks
time:
2024-08-09 08:57:11
- GB/T 14624.4-1993
- Abolished
Standard ID:
GB/T 14624.4-1993
Standard Name:
Test method for drying time of film formation of printing inks
Chinese Name:
油墨结膜干燥检验方法
Standard category:
National Standard (GB)
-
Date of Release:
1993-09-07 -
Date of Implementation:
1994-05-01 -
Date of Expiration:
2009-09-01
Standard ICS number:
Paint and pigment industry >> 87.080 Ink, printing inkChina Standard Classification Number:
General>>Economy, Culture>>A17 Printing Technology
alternative situation:
Replaced QB 563-1983; replaced by GB/T 14624.4-2008
Release date:
1993-09-07Review date:
2004-10-14Drafting Organization:
National Ink Standardization CommitteeFocal point Organization:
National Ink Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Light Industry Federation
Skip to download
Summary:
This standard specifies the test method for ink film drying. This standard applies to the test of ink film drying. GB/T 14624.4-1993 Test method for ink film drying GB/T14624.4-1993 Standard download decompression password: www.bzxz.net
This standard specifies the test method for ink film drying. This standard applies to the test of ink film drying.
This standard specifies the test method for ink film drying. This standard applies to the test of ink film drying.
- Recommended standards
- HG/T 2355-1992 Principles for the arrangement of motion picture film types
- GB/T 2679.4-1994 Determination of roughness of paper and paperboard (Bendtsen roughness method)
- SJ 1538-1987 Compositions of Nickel and Nickel alloy for vacuum tubes
- JB/T 7991.2-2001 Electroplated super-hard abrasive products Internal cutting saw blades
- GB/T 17989.4-2020 Control charts—Part 4:Cumulative sum charts
- GB/T 3762-1983 Sharp-angle sealing gaskets for ferrule-type pipe joints
- JB/T 10221-2000 Technical requirements for YZRSW series eddy current brake wound rotor two-speed three-phase asynchronous motors for tower cranes
- JJF 1189-2008 Calibration Specification for Length Measuring Instrument
- JB/T 9089-1999 Pressure test pump
- GB/T 15826.1-1995 General requirements for machining allowances and tolerances of hammer-forged steel free forgings
- YY/T 0457.4-2003 Characteristics of optoelectronic X-ray image intensifiers for medical electrical equipment Part 4: Determination of image distortion
- GB 19212.1-2003 Safety of power transformers, power supply units and similar products Part 1: General requirements and tests
- SB/T 10517-2009 Management technical criterion for commercial streets
- HG/T 3674-2000 Industrial chloromethane
- GB 50191-1993 Code for seismic design of structures
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com