GB/T 3254.3-1998 Chemical analysis method for antimony trioxide - Determination of lead content
time:
2024-08-11 01:07:26
- GB/T 3254.3-1998
- Abolished
Standard ID:
GB/T 3254.3-1998
Standard Name:
Chemical analysis method for antimony trioxide - Determination of lead content
Chinese Name:
三氧化二锑化学分析方法 铅量的测定
Standard category:
National Standard (GB)
-
Date of Release:
1998-07-01 -
Date of Implementation:
1999-02-01 -
Date of Expiration:
2008-09-01
Standard ICS number:
Metrology and measurement, physical phenomena>>Measurement of fluid flow>>17.120.01 Measurement of fluid flow GeneralChina Standard Classification Number:
Metallurgy>>Metal Chemical Analysis Methods>>H13 Heavy Metals and Their Alloys Analysis Methods
alternative situation:
Replaced GB 3254.4-1982 (adjusted to YS/T 238.4-1994); replaced by GB/T 3253.3-2008Procurement status:
,
Release date:
1982-06-21Review date:
2004-10-14Drafting Organization:
Xishan Mining BureauFocal point Organization:
National Technical Committee for Standardization of Nonferrous MetalsPublishing Department:
State Administration of Quality and Technical SupervisionCompetent Authority:
China Nonferrous Metals Industry Association
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the method for determining the lead content in antimony trioxide. This standard is applicable to the determination of lead content in antimony trioxide. Determination range: 0.010% to 0.40%. GB/T 3254.3-1998 Chemical analysis method for antimony trioxide Determination of lead content GB/T3254.3-1998 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 6878.2-1993 Technical requirements for pipeline centrifugal pumps
- HG 20237-1994 Provisions on technical documents for the completion of chemical industry engineering construction
- JB/T 6392.2-1992 Crane wheel technical conditions
- GB/T 14617.2-1993 Propagation characteristics of land mobile and fixed services Part 2: Propagation characteristics of 100-1000 MHz fixed services
- GB/T 17941.1-2000 Quality requirement for digital products of surveying and mapping--Part 1:Quality requirement for digital line topographic map,digital elevation model
- JB/T 6537-1992 Pipeline centrifugal oil pump types and basic parameters
- SJ/T 10619-1995 Detail specification for electronic components-Fixed power resistors-Type RYG2 metal oxide film resistors Assessment level E
- GB/T 15826.5-1995 Machining allowances and tolerances of steel free forgings on hammers - Sleeve type
- CJ 3077-1998 Steel wire for building cables
- GB 16846-1997 Publication requirements for acoustic output of medical ultrasonic diagnostic equipment
- GB/T 9851.2-2008 Terminology of graphic technology - Part 2: Terms for prepress
- NY/T 5111-2002 Technical regulations for the production of pollution-free food watermelon
- GB/T 14991-1994 Deformed permanent magnetic steel
- SJ/T 10227-1991 Methods of determination for viscosity of potassium silicate solution for use in electronic industry
- GB/T 3768-1996 Acoustics-Determination of sound power levels of noise sources using sound pressure-Survey method using an enveloping measurement surface over a reflecting plane
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com