QB/T 2289.6-2001 Gardening tools hand saw

This standard specifies the product classification, technical requirements, test methods, inspection rules, marking and packaging of hand saws. This standard applies to hand saws for sawing various fruit trees and greening trees. QB/T 2289.6-2001 Gardening Tools Hand Saws QB/T2289.6-2001 Standard download decompression password: www.bzxz.net

Classification No. J47
Registration No. 9100~9102—2001
Light Industry Standard of the People's Republic of China
QB/T2289.4~~2289.6-2001
Gardening Tools
2001-07-16 Issued
China Light Industry Federation
2001-11-01 Implementation
QB/T 2289.4 2001
QB/T 2289.5—2001
QB/T2289.6—2001
Gardening Tools
Gardening Tools
Gardening Tools
QB/T 2289. 4—2001
Pruning shears
Hedge trimmers
TTKAONI KAca-
Gardening tools
QB/T2289.6—2001
This standard is based on the requirements of the State Bureau of Technical Supervision to clean up and rectify national standards. The original national standard GB6870-1986 "Saws" was changed to an industry standard (this standard was issued by the State Light Industry Bureau [1999] No. 112 document and converted to QB/T3856—1999, the content is the same as before).
This standard adds product types and related data. This standard is proposed by the General Business Department of the China-Kuang Light Industry Federation. This standard is under the jurisdiction of the National Tool Hardware Standardization Promotion Center: This standard was drafted by Shanghai Industry Research Institute, and Shandong Horticultural Tools General Factory, Jiangsu Jinlu Group Co., Ltd., Jiangsu Zhangjiagang Fulai Garden Tools Co., Ltd., Dongjiexi Blade Scissors, etc. participated in the drafting. The main drafters of this standard are Lin Meide, Meng Xiangtuan, Shao Xuehai, Ji Jianrong, and Chang Xikui. From the implementation of this standard, the industry standard QB/T3856-1999 "Hand Saw" issued by the former State Bureau of Light Industry will be abolished in October ||tt| ... This standard is applicable to hand saws for sawing various fruit trees and greening trees. Reference standards
The clauses contained in the following standards constitute the clauses of this standard through reference in this standard. When this standard is released, the versions shown are valid. All standards will be revised. The parties using this standard should explore the possibility of using the latest versions of the following standards.
GB/T230-1991Method for testing the Rockwell hardness of metalsGB/T6867-1986Inspection rules, labels and packaging of gardening tools3Product classification
The types of hand saws are divided into ordinary type (indicated by P) and folding type (indicated by Z) according to their structure. Moreover, each type of hand saw is divided into linear type (indicated by 1) and arc type (indicated by 2) according to its blade line, as shown in Figures 1 and 2.3.2Basic dimensions
The basic dimensions of hand saws are as specified in Table 1.
3.3 Marking example
The marking of a product consists of the product name, specification, model code and standard number. Marking example of a 400mm folding linear hand saw: Hand saw 400mm
QB/T2289.6—2001
Approved by China Light Industry Federation on July 16, 20011
TYKAoNIKAca
(number of teeth)
2001-11-01 Implementation
4 Technical requirements
4.1 Surface quality
QB/T2289.6—2001
NTNYNNNAG
1-Saw blade: 2-Rivet: 3-Saw handle
Ordinary hand saw
1-Saw blade: 2-Connecting bolt: 3-Saw handle
Figure 2 Folding hand saw
4.1.1 The hand saw blade should be straight
4.1.2 The saw handle of the hand saw should be comfortable to hold, without burrs, feeder and other defects. 4.1.3 The surface roughness Ra values ​​of the saw blade and saw blade of the hand saw are 6.3μm and 12.5um respectively. 4.2 Saw blade hardness
The blade hardness of hand saw should not be less than 44HRC
4.3 Performance
The teeth of hand saw should be sharp, the edge line should be neat, and it can smoothly saw live branches. 5 Test methodwww.bzxz.net
5.1 Dimension inspection
The dimensions of hand saw should be inspected with special cardboard or universal measuring tool. 12
5.2 Surface quality inspection
QB/T 2289.6—2001
5.2.1 The appearance quality of hand saw should be inspected by visual inspection. 5.2.2 The surface roughness of saw blade should be checked with standard sample. 5.3 Hardness test
The hardness test of hand saw blade should be carried out in accordance with the provisions of GB/T230 and tested at any part of the saw body. 5.4 Sharpness test
The sharpness test of hand saw should be carried out in accordance with the provisions of Table 2. After the test, the saw teeth should not have mechanical damage or deformation. Table 2
Branch diameter
Number of saw cuts
Elasticity test
Bend the saw blade along the periphery of the cylinder with force. After the saw blade returns to its original position, the elasticity test of the hand saw blade is shown in Figure 3, with a deviation of less than 2.5mm
@300mm
Inspection rules, marking and packaging
The inspection rules, marking and packaging of hand saws shall comply with the provisions of GB/T6867. 13
KAONKAca
People's Republic of China
Light Industry Standardization Promotion
Gardening Tools
GB/T 2289.4~2289.6—2001
Editorial and Publishing Committee of Light Industry Standardization
Address: No. 12, Guanghua Road, Chaowai, Beijing
Postal Code: 100020
Tel: (010)65811585
All rights reserved
Reproduction is prohibited
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.