JB/T 8077.1-1999 Broach grinding machine parameters

JB/T 8077.1-1999 This standard is a revision of JB/T 8077-95 "Parameters of broach grinding machines". This standard is part of the JB/T 8077 "Broach grinding machine" series of standards, which includes the following three parts: JB/T 8077.1-1999 Parameters of broach grinding machines JB/T 8077.2-1999 Accuracy inspection of broach grinding machines JB/T 8077.3-1999 Technical conditions for broach grinding machines This standard specifies the parameters of broach grinding machines with movable worktables. This standard is applicable to newly designed broach grinding machines with movable worktables. This standard was first issued in August 1986 as GB 6806-86 and was adjusted to JB/T 8807.1-95 on April 14, 1996. JB/T 8077.1-1999 Broach Grinding Machine Parameters JB/T8077.1-1999 Standard Download Decompression Password: www.bzxz.net

ICS25.080.50
Machinery Industry Standard of the People's Republic of China
JB/T 8077,1-80773—1999
Broach Grinding Machine
1999-05-20 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T8077.1-1999
This small standard is formulated on the basis of 1B/T8077—95 "Broaching Machine Standards". The technical content of this standard is consistent with 1B/T8077-95, and the software is newly compiled according to relevant regulations. This standard is part of the JB/T8077 Broaching Machine series of standards, which includes the following parts: JB/T8077.1-1999 Broaching Machine Parameters JB/T8077.2-1999 Broaching Machine Grinding Machine Sugar Content Inspection/T8077.3-1999 Broaching Machine Grinding Machine Installation Conditions This standard replaces JBT9073-95 from the date of implementation. This standard was proposed by the National Metal Cutting Machine Standardization Technical Committee. This standard was put forward by the National Metal Cutting Machine Standardization Technical Committee Grinding Machine Branch. This standard was drafted by: Tool Grinding Machine Research Institute. This standard was first issued in August 1986 as B18077-86, and revised to B18077-86 in April 1996. This standard specifies the parameters of worktable movable broach grinders. This standard is applicable to newly designed worktable movable broach grinders. The type of worktable movable broach grinders is shown in Figure 1. The machine tool parameters should comply with the provisions of Table 1. +
The longest grinding control month
The largest blade position and its diameterWww.bzxZ.net
Song head box, the Ministry of Quality of the people's seat, the Ministry of Land, the Ministry of Axis, the Ministry of Civil Affairs, the Ministry of Land and Resources, the Ministry of Civil Affairs ...
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.