GB/T 5634.2-1985 Flared combined right angle tee pipe fitting

GB/T 5634.2-1985 Flared combined right angle tee pipe joint body GB/T5634.2-1985 standard download decompression password: www.bzxz.net

National Standard of the People's Republic of ChinaWww.bzxZ.net
Flared type tube fittings-
Swivel run tee-Body
This standard applies to flared type tube fittings for use in pipeline systems with oil and gas as the medium. Marking example:
Outer diameter of pipe D. 10mm flared combination right angle tee pipe fitting body: Fitting body 10GB5634.2-85
National Bureau of Standards 1985-11-25 issued
UDC 621.643.4
GB5634.2-85
1986-09-01 implementation
GB5634.2-85
S°8 yuan
S't×zW
×91
S't×W
[×o[w
GB 5634.2-85
Technical conditions are in accordance with the provisions of GB5653-85 "Technical Conditions for Flared Pipe Fittings".
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. This standard was initiated by the Standardization and Chemical Research Institute of the Ministry of Machinery Industry, Shanghai Hydraulic Parts Factory, Changchun Automobile Research Institute, and Shanghai Hydraulics and Pneumatics Research Institute. The main drafters of this standard are You Lusheng, Li Ning, and Zhang Qianlong.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.