HG/T 20636.2-1998 Relationship between design conditions of automatic control, process and system disciplines

HG/T 20636.2-1998 Relationship between the design conditions of automatic control and process and system disciplines HG/T20636.2-1998 Standard download decompression password: www.bzxz.net

Relationship of Design Information between InstrumentationwithProcess/System
HG/T20636.2-1998
Compiled by: China Huanqiu Chemical Engineering Corporation Approved by: State Administration of Petroleum and Chemical Industry Implementation date: January 1, 1999 Standard Access Network m.622080:60m Compiled by:
Zhang Zhenji
Reviewed by:
Tong Qiujie
Yan Bangming
Duanmu Xian
Xie Changjie
Standard Exchange Network Terminal
1628080.60m Various standards Industry information Free download 1 General Principles
1.0.1 This regulation clarifies the conditional relationship between the automatic control profession and the process and system profession in the design work. This conditional relationship is basic and important for the automatic control profession. 1.0.2 This regulation applies to various design conditions accepted and proposed by the automatic control profession in engineering design, process profession and system profession.
1.0.3 The relevant standards are as follows:
HG20557~20559
《Chemical Plant Process System Engineering Design Regulations》When implementing this regulation, it shall also comply with the provisions of the relevant national standards in force. 11
Standard Technology Network: .baBo.co Various standard industry materials are downloaded for free 2.0.1
2 Relationship between the design conditions of the automatic control profession and the process profession The design conditions accepted by the automatic control profession shall include the following: process flow diagram (PFD), process specification and physical property parameter table: material balance table;
process data table (including containers, towers, heat exchangers, industrial furnaces and special equipment) and equipment diagram; main control system and special detection requirements (including interlocking conditions) and condition table; safety memorandum:
recommended equipment layout diagram.
The conditions proposed by the automatic control specialty shall include the following: Process control flow chart (PCD):
Interlocking system logic block diagram (when necessary); Program control system logic block diagram or time (sequence) table (when necessary). Standard technical network: .bat0.con3.0.1
3 Relationship between the design conditions of the automatic control specialty and the system specialty The conditions accepted by the automatic control specialty shall include the following: Pipeline instrument flow chart (P&ID) and pipeline naming table of each version; Summary table of heat exchangers, containers (towers), industrial furnaces and special equipment connection: Control valve, flow meter, safety valve and pressure relief valve [Note] data table; Boundary condition table; bZxz.net
System specialty's description of the special requirements for the measurement and control system of the public works in the device; Noise control design regulations proposed by the system specialty (when necessary). [Note]: When it is stipulated that the safety valve and pressure relief valve are the responsibility of the automatic control specialty. The conditions proposed by the automatic control major should include the following: process control flow chart (PCD); instrument data sheet of control valves and flow meters: interface conditions of instruments on various equipment: complete various versions of pipeline instrument flow charts (P&ID) in cooperation with system professionals: design requirements for random instruments of complete sets (matching) equipment or devices. Standard replacement network
eccm13
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.