JB/T 8004.10-1999 Multi-handle nuts for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8004.10-1999
- in force
Standard ID:
JB/T 8004.10-1999
Standard Name:
Multi-handle nuts for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 多手柄螺母
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8004.10-1995 (original standard number GB/T 2157-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8004.10-1999 JB/T 8004.10-1999 Multi-handle nuts for machine tool fixture parts and components JB/T8004.10-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtureswww.bzxz.net
The parts and units of jigs and fixtures1999-08-06Published
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixturesMultiple handle nut
This standard specifies the multi-handle nuts with thread specifications of M12~M30. 2 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 199918
JB/T8004.101999
JB/T8004.10-1995
Implemented on January 1, 2000
3 Marking
3.1 Marking example:
d-M16 A-type multi-handle nut:
JB/T8004.10—1999
Nut AM16JB/T8004.101999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtureswww.bzxz.net
The parts and units of jigs and fixtures1999-08-06Published
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixturesMultiple handle nut
This standard specifies the multi-handle nuts with thread specifications of M12~M30. 2 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 199918
JB/T8004.101999
JB/T8004.10-1995
Implemented on January 1, 2000
3 Marking
3.1 Marking example:
d-M16 A-type multi-handle nut:
JB/T8004.10—1999
Nut AM16JB/T8004.101999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 11798.8-2001 Technical requirements for the verification of motor vehicle safety testing equipment Part 8: Technical requirements for the verification of motorcycle wheel deviation detectors
- HG/T 3565-1989 Hydrogen ion laser electronic color separation film
- JB/T 6288-1992 Terminology of ground machine systems
- GB/T 20257.4-2017 Cartographic symbols for national fundamental scale maps—Part 4:Specifications for cartographic symbols 1∶250 000 1∶500 000 & 1∶1 000 000 topographic maps
- JB/T 6758-1993 Paper insulated enameled transposed conductor
- CB/T 3226-1995 Fixed rectangular windows in the cab
- NY/T 1464.5-2007 Guidelines on efficacy evaluation of pesticides Part 5: Insectides against apple woolly aphid
- GB 16895.13-2002 Electrical installations in buildings Part 7: Requirements for special installations or locations Section 701: Locations with bathtubs or shower basins
- JB/T 974-1977 Welded bulkhead straight pipe joint
- NY/T 1010-2006 Technical regulation of estimation for soybean quality homogeneity
- JB/T 3750-1984 Product Category Classification
- JB/T 8920-1999 Engineering plastic inner link light conveyor chain
- GB/T 3211-1987 Chromium metal
- SY/T 5463-1992 Types and basic parameters of plunger pumps for oilfield fracturing
- GB/T 8105-1987 Test methods for pressure control valves
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com