JB/T 5170-1991 Terminology for pellet feed press
time:
1991-05-18 16:00:00
- JB/T 5170-1991
- in force
Standard ID:
JB/T 5170-1991
Standard Name:
Terminology for pellet feed press
Chinese Name:
颗粒饲料压制机 术语
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1991-05-18 -
Date of Implementation:
1992-01-01
China Standard Classification Number:
Agriculture, Forestry>>Agricultural and Forestry Machinery and Equipment>>B93 Agricultural and Sideline Products and Feed Processing Machinery
Focal point Organization:
Hohhot Animal Husbandry Machinery Research InstitutePublishing Department:
Hohhot Animal Husbandry Machinery Research Institute
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the terms related to pellet presses. This standard is effective for ring die and flat die pellet presses. JB/T 5170-1991 Terminology of pellet presses JB/T5170-1991 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
People's Republic of China Press Machinery Industry Standard JB/T51701991
1991-05-184
1992-01-01Surface
pellet mill
pellet mill with horizontal and ring type diepellet mill with vertical and ring type diepellet mill with vertical and round flat type diefeeder
conditioner
heartforpelletmill
2.2.3.1Roller assembly
clearance adjusting assembly
main shaft | |tt | t||compression area
extrusion area
shaped pellet
shaped pellet ratio
diameter of die
thickness of die
width of die
JB/T51701991
workingwidth ofdie
hole in die
opening rate of die||tt| |shapeof holeindie
JB/T51701991
cross sectional size of hole in dieeffective length of hole in die counterboredepth of hole indieinlet angle of hole in die
performance ratio of hole in die3
51701991
degree from gWww.bzxZ.net
880A1230
from 1991A9||tt ||100044
19919m
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
1991-05-184
1992-01-01Surface
pellet mill
pellet mill with horizontal and ring type diepellet mill with vertical and ring type diepellet mill with vertical and round flat type diefeeder
conditioner
heartforpelletmill
2.2.3.1Roller assembly
clearance adjusting assembly
main shaft | |tt | t||compression area
extrusion area
shaped pellet
shaped pellet ratio
diameter of die
thickness of die
width of die
JB/T51701991
workingwidth ofdie
hole in die
opening rate of die||tt| |shapeof holeindie
JB/T51701991
cross sectional size of hole in dieeffective length of hole in die counterboredepth of hole indieinlet angle of hole in die
performance ratio of hole in die3
51701991
degree from gWww.bzxZ.net
880A1230
from 1991A9||tt ||100044
19919m
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 4706.14-1999 Safety of household and similar electrical appliances - Particular requirements for toasters, grills, electric ovens and similar appliances
- GB 13260-1991 Types and dimensions of tubular fluorescent lamp holders and starter holders
- JB/T 7139-1993 Terminology of complete equipment for forage seed processing
- CB 590-1995 Specification for high pressure air right angle stop check valves with mounting plate
- SJ 2803-1987 Method for determination of trace carbon dioxide in electronic grade gases-Pre-cut hydrogen flame ionzation detector method
- GB/T 17989.2-2020 Control charts—Part 2:Shewhart control charts
- JB/T 7919.3-1999 Locking nuts and locking devices for rolling bearing accessories
- JB/T 7878-1995 Wind turbine terminology
- GB/T 4122.4-2002 Packaging trerm-Wooden containers
- GB 5420-2003 Dry Cool Hygiene Standard
- JB/T 7120-1993 Technical requirements for YZC series (IP44) low vibration and low noise three-phase asynchronous motors (frame size 80 to 160)
- GB 12731-1991 Flame-retardant V-belt
- GB/T 39912-2021 Science and technology program-generated scientific data archiving—Technical and management specification
- GB 50278-1998 Specification for construction and acceptance of lifting equipment installation projects
- GB 12982-2004 National flag
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]