
Technical data of Type DW-217 electronic glass
time:
2024-07-14 14:49:24
- SJ/T 10586.3-1994
- Abolished
Standard ID:
SJ/T 10586.3-1994
Standard Name:
Technical data of Type DW-217 electronic glass
Chinese Name:
DW-217型电子玻璃技术数据
Standard category:
Electronic Industry Standard (SJ)
-
Date of Release:
1994-08-08 -
Date of Implementation:
1994-12-01 -
Date of Expiration:
2008-01-20
China Standard Classification Number:
General>>Standardization Management and General Provisions>>A01 Technical Management
alternative situation:
SJ 670-83

Skip to download
Summary:
SJ/T 10586.3-1994 DW-217 electronic glass technical data SJ/T10586.3-1994 standard download decompression password: www.bzxz.net

Some standard content:
Electronic Industry Standard of the People's Republic of China
Technical dataoftypeDW-217electronicglassSubject content and scope of application
This standard specifies the chemical composition and physical and chemical performance indicators of DW-217 electronic glass. This standard applies to glass materials used in electronic devices such as counter tubes and voltage regulator tubes. Reference standards
GB9000 Standard method for chemical analysis of electronic glass GB9622 Test method for physical and chemical properties of electronic glass 3 Technical requirements
Chemical composition is shown in Table 1.
Chemical composition
Weight percentage
73.0±1.0
Note: 1) Al, O., Fe.O, as impurity control, are not included in the percentage composition. 3.2 Physical and chemical performance indicators are shown in Table 2.
1994-08-08 Ministry of Electronics Industry of the People's Republic of China approved SJ/T10586.3-94
Replaced SJ670-83
Test method
GB9000.10
GB9000.12
GB9000.14
Implemented on 1994-12-01
Indicator name
SJ/T10586.3-94|| tt||Average linear thermal expansion coefficient in the range of 0~300℃CaDensity
Softening point
Annealing point
Strain point
Dielectric loss tangent value tg8×10 at frequency 6MHz and temperature 20℃Temperature (Tx-100) when volume resistivity is 100M0·cmThermal stability
Water resistanceChemical stability level
Additional instructions:
This standard is under the jurisdiction of the Standardization Institute of the Ministry of Electronics Industry. 1/℃wwW.bzxz.Net
This standard was drafted by the Standardization Institute of the Ministry of Electronics Industry and the 772 Factory. The main drafters of this standard are Liu Chengjun and Wang Yongmei. This standard was first issued in 1973 and revised for the second time in August 1994. 2
(37.0±1.0)X10-7
2.350±0.015
745±10
525±10
480±10
≥290
≥250
Test method
GB9622:9
GB9622.11
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Technical dataoftypeDW-217electronicglassSubject content and scope of application
This standard specifies the chemical composition and physical and chemical performance indicators of DW-217 electronic glass. This standard applies to glass materials used in electronic devices such as counter tubes and voltage regulator tubes. Reference standards
GB9000 Standard method for chemical analysis of electronic glass GB9622 Test method for physical and chemical properties of electronic glass 3 Technical requirements
Chemical composition is shown in Table 1.
Chemical composition
Weight percentage
73.0±1.0
Note: 1) Al, O., Fe.O, as impurity control, are not included in the percentage composition. 3.2 Physical and chemical performance indicators are shown in Table 2.
1994-08-08 Ministry of Electronics Industry of the People's Republic of China approved SJ/T10586.3-94
Replaced SJ670-83
Test method
GB9000.10
GB9000.12
GB9000.14
Implemented on 1994-12-01
Indicator name
SJ/T10586.3-94|| tt||Average linear thermal expansion coefficient in the range of 0~300℃CaDensity
Softening point
Annealing point
Strain point
Dielectric loss tangent value tg8×10 at frequency 6MHz and temperature 20℃Temperature (Tx-100) when volume resistivity is 100M0·cmThermal stability
Water resistanceChemical stability level
Additional instructions:
This standard is under the jurisdiction of the Standardization Institute of the Ministry of Electronics Industry. 1/℃wwW.bzxz.Net
This standard was drafted by the Standardization Institute of the Ministry of Electronics Industry and the 772 Factory. The main drafters of this standard are Liu Chengjun and Wang Yongmei. This standard was first issued in 1973 and revised for the second time in August 1994. 2
(37.0±1.0)X10-7
2.350±0.015
745±10
525±10
480±10
≥290
≥250
Test method
GB9622:9
GB9622.11
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 4200-1997 Classification of hot work
- HG/T 2357-1992 Film tractor
- JB/T 5302-1991 Supplementary structural dimensions of spherical ball bearing seats
- HG/T 3574-1990 Photographic grade 4-hydroxy-6-methyl-1,3,3a,7-tetraazaindene (ST-1)
- GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
- GB/T 15455-1995 Determination of dissolved oxygen in industrial circulating cooling water - Iodine titration method
- GB/T 8101-2002 Hydraulic relief valve installation surface
- GB/T 14844-1993 Semiconductor material designation method
- GB/T 39892-2021 Specification of reporting and processing of motor vehicle product defect clue
- SJ 1.8-1987 Provision and requirements for preparation and revision of technical standards for electronic industry-Requirements that should be followed during standards-writing
- JB/T 5117-1991 General technical requirements for grain combine harvesters
- JB/T 10329.2-2002 Electric fusion external machining machine tools Part 2:
- GB 4804-1984 Hygienic standard for enamel tableware containers
- GB/T 2822-1981 Standard linear dimensions
- HG/T 20700-2000 Programmable Controller System Engineering Design Specification
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com