JB/T 9162.33-1999 Round contact dimensions
time:
2024-08-11 18:12:33
- JB/T 9162.33-1999
- in force
Standard ID:
JB/T 9162.33-1999
Standard Name:
Round contact dimensions
Chinese Name:
圆触头 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.33-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.33-1999 JB/T 9162.33-1999 Round contact dimensions JB/T9162.33-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 ImplementationwwW.bzxz.Net
Machinery Industry Standard of the People's Republic of China
Contact
Dimengions
This standard specifies the type and length of wide-circuit contacts
The type and dimensions are as specified in the figure below.
Marking series:
Marking of round contacts with a diameter of 3mm:
Full head 362.33-9
Guohao Machinery Industry Bureau 1999-05-10 approved 40
JB/T9162.33-1999
B44501.33-7
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
Inspection fixture parts and components
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 ImplementationwwW.bzxz.Net
Machinery Industry Standard of the People's Republic of China
Contact
Dimengions
This standard specifies the type and length of wide-circuit contacts
The type and dimensions are as specified in the figure below.
Marking series:
Marking of round contacts with a diameter of 3mm:
Full head 362.33-9
Guohao Machinery Industry Bureau 1999-05-10 approved 40
JB/T9162.33-1999
B44501.33-7
2000-01-01 implemented
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 14897.3-1994 Terminology of woodworking tools - Milling cutters
- JB/T 6746.3-1993 Porcelain insulator rod support for electric precipitator
- SJ 20641-1997 Specification for Indium Antimonide Single Crystal for Infrared Detectors
- SY/T 5429-2000 Small diameter flow water content tester
- JB/T 9079.2-1999 Piston expander performance test method
- GB 11643-1999 Citizen identification number
- GB/T 14619-1993 Alumina ceramic substrates for thick film integrated circuits
- QB/T 2146-1995 Thread take-up screws for household sewing machines
- GB/T 4956-2003 Oon-magnetic coatings on magnetic substrates?Measurement of coating thickness?Magnetic method
- SJ 3228.3-1989 Determination of loss on ignition in high purity arenaceous quartz
- JB/T 901-1995 Mica foil
- GB 16895.8-2000 Electrical installations in buildings Part 7: Requirements for special installations or locations Section 706: Narrow conductive locations
- HG/T 20519.1-1992 Contents of chemical process design construction drawings
- GB 18075-2000 Standard for sanitary protection distances in automobile manufacturing plants
- GB/T 15332-1994 Determination of softening point of hot melt adhesives - Ring and ball method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com