GB 18535-2001 Occupational exposure limits for bentonite dust in workplace air

This standard specifies the maximum permissible concentration of bentonite dust in the air of a workshop, the time-weighted average permissible concentration and its monitoring and inspection methods. This standard is applicable to all types of industrial enterprises that produce and use bentonite. GB 18535-2001 Occupational exposure limits for bentonite dust in the air of a workshop GB18535-2001 Standard download decompression password: www.bzxz.net

ICS_13.100
National Standard of the People's Republic of China
GB 18535—2001
Occupational exposure limit for bentonite dust in the air of workplace
Issued on 2001-12-04
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Implemented on 2002-05-01
GB18535-2001
This standard is formulated for the first time based on the data of on-site labor hygiene survey, epidemiological survey and animal experiment, and is used as a health standard for workplace environmental monitoring and health supervision. This standard shall be implemented from May 1, 2002. This standard is proposed by the Ministry of Health of the People's Republic of China. The responsible drafting unit of this standard: Zhejiang Medical University; participating drafting unit: Yuhang Municipal Health and Epidemic Prevention Station. The main drafters of this standard are: Zeng Zhaoyu, Yang Saili, Zhang Qifeng, and Sun Yongtao. This standard is entrusted to the Institute of Labor Health and Occupational Diseases, Chinese Academy of Preventive Medicine for interpretation. irKAONikAca=
1 Scope
National Standard of the People's Republic of China
Occupational exposure limit for bentonite dust in the air of workplace
GB18535—2001
This standard specifies the maximum allowable concentration, time-weighted average allowable concentration and monitoring and inspection methods of bentonite dust in the air of workplace. This standard is applicable to all types of industrial enterprises that produce and use bentonite. 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T5748--1985 Method for determination of dust in workplace air 3 Hygiene requirements www.bzxz.net
The maximum permissible concentration of bentonite dust containing less than 10% free silicon dioxide in the workshop air is 10mg/m3, and the time-weighted average permissible concentration is 6mg/m3.
4 Monitoring and inspection methods
The determination of bentonite dust concentration and free silicon dioxide content in the workplace air shall be carried out in accordance with GB/T5748. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on December 4, 2001 and implemented on May 1, 2002
GB18535-2001
People's Republic of China
National Standard
Occupational Exposure Limits of Bentonite Dust in Workshop Air GB18535-2001
Published by China Standards Press
No. 16, Sanlihebei Street, Fuxingmenwai, Beijing
Postal Code: 100045
Tel: 685239466851754 8
Printed by China Standard Press, Qinhuangdao Printing Factory, Xinhua Bookstore, Beijing Distribution Office, Xinhua Bookstores, Sold by all local Xinhua Bookstores*
Format: 880×12301/16 Printing sheet: 1/2 Number of words: 4 First edition: March 2002 First printing: March 2002 Number of copies: 1-1500
Book number: 155066·1-18230
Website: bzcbs.com
Copyright: All rights reserved. Infringements must be investigated
Report phone number: (010)68533533
KANiKAca=
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.