JB/T 5992.1-1992 General principles for classification and coding of mechanical manufacturing process methods

This standard specifies the basic principles, code structure, and division of large and medium categories of process methods for mechanical manufacturing processes. This standard applies to computer-aided process management and process design in the machinery manufacturing industry. The codes specified in this standard are not suitable for marking on drawings. JB/T 5992.1-1992 General principles for classification and coding of mechanical manufacturing process methods JB/T5992.1-1992 Standard download and decompression password: www.bzxz.net

J30 | | tt | | JB | -17 Release
Implementation of the Ministry of Mechanical and Electronics Industry of the People's Republic of China on 1993-07-01
Release
Machinery Industry Standard of the People's Republic of China
Classification and Code of Machinery Manufacturing Process Methods
Subject content and scope of application
General principles
JB/T5992.1-92
This standard specifies the basic principles, code structure and process for the classification of mechanical manufacturing process methods The division of methods into large and medium categories. This standard applies to computer-aided process management and process design in the machinery manufacturing industry. The codes specified in this standard are not suitable for marking on drawings. 2 Reference standards
GB 4863
GB3500
GB5611
GB8541
GB3375
GB7232
GB8264||tt| |GB3138
GB11372
GB5186
JB/T5992.2
JB/T5992.3
JB/T5992.4
JB /T5992.5
JB/T5992.6
JB/T 5992.7
JB/T5992.8
JB/T5992.9
Machinery Manufacturing Basic process terms
Powder metallurgy adjustment
Casting terms
Forging terms
Welding terms
Metal heat treatment process terms
Xu decoration terminology
Common electroplating terminology
Rust prevention terminology
Metal welding and brazing method representation code on the diagram Mechanical manufacturing process method classification and code
Castingwww.bzxz.net
Processing
Classification and codes of mechanical manufacturing processes
Classification and codes of mechanical manufacturing processes
Welding
Classification and codes of mechanical manufacturing processes Code
Cutting processing
Classification and codes of mechanical manufacturing process methods
Special processing
Classification and codes of mechanical manufacturing process methods
Classification and codes of mechanical manufacturing process methods Code
Classification and Code of Mechanical Manufacturing Process Methods
Heat Treatment
Coating
Assembly and Packaging
JB/T5992.10 Classification and Code of Mechanical Manufacturing Process Methods Code other process methods
3 Basic principles of process method classification
3.1 Mechanical manufacturing process methods are divided into four levels: large category, medium category, small category and subdivision. If the four levels are not enough, you can Further refinement.
3.2 The name of the process method in each level must comply with the corresponding terminology standards. 3.3 Each level should leave a space for use when needed. 4 code structure
4.1 The codes of the process methods are all represented by Arabic numerals, among which the codes for large categories, medium categories and small categories are all expressed in 0~9- The subdivision code uses two digits from 01 to 99, as shown below. Ministry of Machinery and Electronics Industry approved on 1992-07-17 for implementation on 1993-07-01
JB/T5992.1 —92
Subdivided category code
Small category code
Medium category code
Large category code
4.2 Do not add anything after the large category or medium category code \0\, if the subcategory is no longer subdivided, the code is followed by \00\ to the fifth position, for example:
一cast
01-|| tt||011
01101-
Sand mold to be made
Wet mold casting
Wet mold with box shape Casting
Special casting
Pressure casting (this subcategory will no longer be subdivided)
4.3 The last code bit of each level is the containment code. 5 Principles of classification of major and medium categories of process methods 5.1 Major categories of process methods are divided according to process majors. 5.2 Medium categories of process methods are divided according to the process characteristics of each major category. 6 Names and codes of major categories and intermediate categories of process methods. The names and codes of categories and intermediate categories are as specified in the table. 7. The division and code of subcategories and subcategories of process methods. The division and codes of subcategories and subcategories of process methods are in accordance with the provisions of JB/T5992.25992.10, 2
8| | tt | Pre-cut processing
Special processing
Heat treatment
Coating
Assembly
and packaging
Others
0|| tt||1
sand casting
most made
electric double welding
cutting tool
electric physics
processing||tt ||Overall
Heat treatment
Electroplating
Assembly
Powder metallurgy
Special and other manufacturing
Drying| |tt||Resistance
Before grinding
Electrochemistry
Addition
Processing
Surface
Heat treatment| |tt||Electroless plating
Testing and
Inspection
Inspection
Cold work
JB/T5992.1—92
generation
stamping
gas welding
chemical processing
chemistry
heat treatment
vacuum deposition
Non-metal
Material forming
Extrusion
Pressing
Clamp processing||tt ||Heat tracking
Surface treatment
Weighing
Spinning
Conversion film
Packaging
Anti-rust
Drawing
Composite processing
Thermal spray dyeing
Braiding
7|| tt||Other welding
Painting
Braiding
Others
Slim elastic
Others
its cannon
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.