QB/T 2212.8-1996 Construction tools (brick and tile) Pointed press

This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of pointed shaped presses. This standard applies to the pointed shaped press No. 206 specified in QB/T 2212.1R "Terms of Construction Tools (Bricks and Tiles)". QB/T 2212.8-1996 Construction Tools (Bricks and Tiles) Pointed shaped press QB/T2212.8-1996 Standard download decompression password: www.bzxz.net

QB/T 2212.8-1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002-1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into the light industry standard. In the overall structure of the standard, the terminology of construction tools, general technical conditions and their product standards are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are incorporated into the general technical conditions. The product standards are retained according to the numbers in the terms. A product standard "Diamond Masonry Shovel" is added. This standard changes the word "bricks and tiles" in the brackets of the original name to "bricks and tiles", and puts it behind the standard name "construction tools", so that the hand tools used in construction work are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terms and general technical conditions are based on it. The technical content in the original standard that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ47001~47003--1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian House Equipment Tool General Factory, Shanghai Fengxian Tool Lan Factory, etc.
The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Lizhe, Qin Delin, Wang Chende. This standard is entrusted to the National Tool Hardware Standardization Center for interpretation. 605
1 Scope
Light Industry Standard of the People's Republic of China
Construction Tools (Bricks and Tiles)
Pointed Press
QB/T2212.8bZxz.net
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of pointed presses. This standard applies to the No. 206 pointed press specified in QB/T2212.1 "Terms of Construction Tools (Bricks and Tiles)". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the new versions of the following standards. QB/T2212.1--1996 Terminology of Construction Tools (Brick and Brick Type) QB/T2212.2-1996
Construction Tools (Brick and Brick Type)
3 Product Classification
The type of the pointed pressure is shown in Figure 1.
3.2 Main Dimensions
The main dimensions of the pointed pressure are as specified in Table 1. Table 1
Press Plate Length
Limit Deviation
Note: Special types and other dimensions may not be restricted by this table. Approved by China Light Industry General Association on March 22, 1996
General technical conditions
Main dimensions
Press plate width B
HTKAoNiKAca
DD rotation
Limit deviation
Press plate thickness
Implemented on December 1, 1996
4 Technical requirements
QB/T 2212.8—1996
The technical requirements for pointed presses shall comply with the provisions of Chapter 4 of QB/T2212.2--1996. Test methods
5.1 Dimension inspection
Measured with general measuring tools.
Other item inspections
Conducted in accordance with the provisions of Chapter 5 of QB/T2212.2--1996. Inspection rules
According to the provisions of Chapter 6 of QB/T2212.2-1996. Packaging, marking, transportation and storage
According to the provisions of Chapter 7 of QB/T2212.2-1996. 607
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.