JB/T 8854.2-2001 GⅡCL, GⅡCLZ drum gear coupling

JB/T 8854.2—2001 This standard is a revision and merger of JB/T 8854.2—1999 "GⅠCL type, GⅡCL type drum gear coupling" and JB/T 8854.3—1999 "GⅠCLZ type, GⅡCLZ type drum gear coupling". During the revision, technical requirements, test methods and other contents were added; the selection and calculation of couplings were added; and the nominal torque was improved. This standard specifies the type, basic parameters, main dimensions, technical requirements, test methods, inspection rules, marking, packaging, transportation and storage of GⅡCL type and GⅡCLZ type drum gear couplings. This standard is applicable to GⅡCL type and GⅡCLZ type drum gear couplings that connect horizontal two coaxial transmission shaft systems and have a certain angular compensation performance for the relative offset of the two shafts. The working environment temperature is -20℃～80℃, and the nominal torque transmitted is 0.4lkN·m～4500kNm. The previous versions of the standards replaced by this standard are: ——ZB J19 013-89, JB/T 8854.2-1999; ——ZB J19 014-89, JB/T 8854.3-1999. JB/T 8854.2-2001 GⅡCL type, GⅡCLZ type drum gear coupling JB/T8854.2-2001 Standard download decompression password: www.bzxz.net

ICS21.120.2D
Machinery Industry Standard of the People's Republic of China
JB/T8854.2—2001
GCL type GICLZ type
Drum gear coupling
Curvcd tooth couplingGI CLG II CL22001-09-03 issued
China Machinery Industry Federation
2001-12-01 Implementation
JB8854.2—2001
Reference
Formula
Basic parameters and dimensions
4 Technical requirements
Test methods
6 Test rules
Name, packaging and storage
Appendix A [Standard Appendix]
Appendix B (Standard Appendix
Application and calculation of the auxiliary energy of the gear coupling
Working coefficient of the auxiliary energy of the coupling
|JRITS85I2-
This standard is a certification for JR RR54.2-1999GTCL, GCL type outgoing couplings and JB/TBB54.3-1999C, GC type in-line gear couplings.
The main difference between this standard and JD/T8854.2-1999 and JB/T8854.3-1999 in terms of technical content is that GCL type and GICLZ type drum couplings are combined into one standard. The GICL and GICLL types are removed and set as a separate standard; the technical requirements, test methods, inspection rules, packaging and storage requirements of the CL and G1eLz drum gear couplings are added: the selection and calculation of drum gear couplings are added, the working coefficient of the B coupling is added, and the nominal torque is increased by 15%-20%. This standard is in accordance with Appendix A and Appendix B. Appendix to the standard, this standard replaces JB/T8854.2-1999.RT8854.3-1999 from January 2009. This standard is proposed and drawn up by the Technical Committee for Standardization of Metallurgical Equipment of the Machinery Industry. The drafting unit of this standard: China Second Heavy Machinery Group, the drafting units of this standard: Second Heavy Machinery Parts Factory, Xi'an Heavy Machinery Research Institute, Yizhou City Coupling Factory. The main drafter of this standard: Zhao Guangfa, Baoding, Yue. The quality version of the standard replaced by this standard is: ZB J19 013-1989, JB8854.2—959: ZB J19 0[4.[989, JB/T 8854.3--19.1 Scope
Machinery Industry Standard of the People's Republic of China
GICL type, GICLZ type
Drum gear coupling
Curved twoth tauplingGICLG IlCLzJB/T 8854.2—2001
Replace BT8554.2—1999
JI/T 8854.3—1999
This standard specifies the types, basic data, main dimensions, technical requirements, inspection methods, inspection rules, marking, packaging and storage of GⅡCL and GⅡCLZ type drum gear couplings. This standard is applicable to GⅡCL type, ⅡC[.7 drum gear couplings with certain angular compensation performance for the relative deviation of the two shafts, operating temperature -20~+80℃, and the transmission nominal torque is 0.4-4500kN·m2. The clauses contained in the referenced standards are read through and constitute the full clauses of the technical standard. At the time of publication of this standard, the versions shown are valid. All standards will be revised, and users of the standard should explore the possibility of using the latest versions of the following standards. 191
GET11841996
GE/T 309B.1—1982
GA/T 3852—1997
GR/T6398—1986
G13521989
JH/T$00 0.1—1008
JE/ 500.6-[998
JB/T $000.8..1998
JB/T5000.12—1998
JB/T 5000.13—1998
JB/T6396—1992
JBT6397—1992
National marking for packaging, storage and transportation
Shape and position tolerance, non-standard tolerance value
Mechanical properties of fastening two pieces of screw wheels. Pin and post coupling shaft hole and connection type and size
Transport packaging delivery and receipt mark
New open line round bracket wheel fine curve
General engineering chain selection carbon injection parts
General technical conditions for heavy machinery product inspection technical conditions for heavy machinery castings
General technical conditions for heavy machinery press parts
General technical conditions for heavy machinery painting
General technical conditions for heavy machinery packaging
Large alloy compression steel parts
Large carbon structural steel forgings
3 Types, basic numbers and main dimensions
3.1 Types, basic numbers and main dimensions of GⅡCL type drum gear couplings 3.1.1 GIC1. type drum gear couplings have two structural types. The following figure applies to GCL-CL13;
Figure 2—Applies to GC14-CT.25.
Approved by China Machinery Industry Federation on September 3, 2001 and implemented on December 1, 2001
, Y-hole
JB/T8854,2200
3.1.1 The basic number and main dimensions of GⅡCI. type gear couplings shall comply with the provisions of JB/T 8854.2-2001
so1oro
Dsson'o
SEIXYO
(s1T)o1Dot
56*06*58*08
5k*1 'or *59 9 *09
SG“06“s8\08
S*1t \a'sy *e9*09
95 '55 05 | tt||()1
011001
JB gate 88542 - 2001 | | tt | | 528612 | |039009*095
(2)US (O
0E9*D0909S"CE5
(E9*D09095
KISSF'09F
009095
(04)"0%
\0RF096(092)
E ODE(O)
“082
JB/T8854.2—2001
3.2 Type, size and main dimensions of GJC1.7 type drum gear coupling3.2.1 Two structural types of GTCLZ type drum gear coupling (Figure 3—Applicable to GICLZI-GⅡCLZ13; Figure 4 is applicable to GICLz14-GCL225,
, Y type
3.2.2 The basic structure and main dimensions of GICL.7 type drum gear coupling shall comply with the provisions of Table 2 of JB/T8854.2-2001
Niu low intelligence
5901'0
（S01)00bZxz.net
56065808
0s9909
9555052757
SL150L*59“9'09
127519
J/542-2001
St5'E1
0000061
12“02s9
6“s“0%
“0“00]
065808
Xixin Mengtang
JE/T 8854.2 -2001 | |tt | tt||02*00E2)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.