
GB/T 4169.10-1984 Support columns for plastic injection mould parts
time:
2024-08-10 14:20:46
- GB/T 4169.10-1984
- Abolished
Standard ID:
GB/T 4169.10-1984
Standard Name:
Support columns for plastic injection mould parts
Chinese Name:
塑料注射模具零件 支承柱
Standard category:
National Standard (GB)
-
Date of Release:
1984-02-27 -
Date of Implementation:
1985-01-01 -
Date of Expiration:
2007-04-01
Standard ICS number:
Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.30 Molding Equipment and Casting EquipmentChina Standard Classification Number:
Machinery>>Process Equipment>>J46 Mold
alternative situation:
Replaced by GB/T 4169.10-2006
Review date:
2004-10-14Drafting Organization:
Guilin Electric Appliance InstituteFocal point Organization:
National Technical Committee for Mould StandardizationPublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration

Skip to download
Summary:
GB/T 4169.10-1984 Plastic injection mold parts support column GB/T4169.10-1984 standard download decompression password: www.bzxz.net

Some standard content:
Marking example:
National Standard of the People's Republic of China
Support pillars for plastic injection mould parts
Conpopeats of Injection mould for plasticesSupport pillars
Support pillars
$32×63wwW.bzxz.Net
National Bureau of Standards 1984-02-2T issued As
GB4169.10—84
L 8:18
UDC621.725.29
GB4169.10—84
Other V4
1985-01-01 implementation
Material, 45 steel GB699-65.
Technical conditions:
1: The chamfer shown in the figure is 1×45°.
0. The 10 holes in the middle can be changed into screw holes or through holes. c. Others are in accordance with GB4170-B4.
Additional instructions:
GB 4169. 10-84
This standard is issued by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Guilin Electric Science Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Guilin Electric Science Research Institute of the Ministry of Machinery Industry, the Shanghai Plastic Products Mould Factory of the Ministry of Light Industry, the Chongqing Radio Factory of the Ministry of Electronics Industry, the Shanghai Spark Mould General Factory of Shanghai, the Beijing Qingyun Instrument Factory of the Ministry of Aviation Industry, and the Taiyuan Weidong Chemical Factory of the Ministry of Ordnance Industry. The main drafters of this standard are Zhang Ansheng, Zhao Yunjie, Yang Jianxin, Wang Xu, Wei Min, and Wu Zhengyuan
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Support pillars for plastic injection mould parts
Conpopeats of Injection mould for plasticesSupport pillars
Support pillars
$32×63wwW.bzxz.Net
National Bureau of Standards 1984-02-2T issued As
GB4169.10—84
L 8:18
UDC621.725.29
GB4169.10—84
Other V4
1985-01-01 implementation
Material, 45 steel GB699-65.
Technical conditions:
1: The chamfer shown in the figure is 1×45°.
0. The 10 holes in the middle can be changed into screw holes or through holes. c. Others are in accordance with GB4170-B4.
Additional instructions:
GB 4169. 10-84
This standard is issued by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Guilin Electric Science Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Guilin Electric Science Research Institute of the Ministry of Machinery Industry, the Shanghai Plastic Products Mould Factory of the Ministry of Light Industry, the Chongqing Radio Factory of the Ministry of Electronics Industry, the Shanghai Spark Mould General Factory of Shanghai, the Beijing Qingyun Instrument Factory of the Ministry of Aviation Industry, and the Taiyuan Weidong Chemical Factory of the Ministry of Ordnance Industry. The main drafters of this standard are Zhang Ansheng, Zhao Yunjie, Yang Jianxin, Wang Xu, Wei Min, and Wu Zhengyuan
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SL 309-2007 Criteria for the evaluation of metrological certification of water quality inspection institutions
- GB/T 9149-1988 General technical requirements for magnetic powder clutches
- JJG 965-2001 Verification Regulation of Optical Power Meter in Telecommunication
- GB/T 4892-2008 Dimensions of rigid rectangular packages—Transport [aclages
- GB/T 3781.4-1993 Determination of pH value of acetylene black
- JB/T 3411.9-1999 45° round inner hole turning tool bar dimensions
- HG/T 2275.1-1992 Orpiment Ore
- GB 4706.33-1996 Safety of household and similar electrical appliances - Special requirements for commercial electric deep fryers
- JB/T 7704.6-1995 Test methods for electroplating solutions - Determination of polarization curves
- GB/T 15372-1994 Terminology for reciprocating lawn mowers
- GB/T 4931-2000 Helium-neon laser series spectrum
- GB/T 15826.3-1995 Machining allowances and tolerances for hammer-forged steel free forgings - Discs with holes
- JJG 571-2004 Verification Regulation of Reading Microscope and Measuring Microscope
- JB/T 7942.1-1995 Lever type oil gun
- GB 11568-1999 Automobile hood (lid) lock system
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com