Dangerous goods - Test method of deflagration to detonation transition
time:
2024-06-29 06:35:00
- GB/T 21571-2008
- in force
Standard ID:
GB/T 21571-2008
Standard Name:
Dangerous goods - Test method of deflagration to detonation transition
Chinese Name:
危险品 爆燃转爆轰试验方法
Standard category:
National Standard (GB)
-
Date of Release:
2008-04-01 -
Date of Implementation:
2008-09-01
Standard ICS number:
Environmental protection, health care and safety >> 13.300 Dangerous goods protectionChina Standard Classification Number:
Comprehensive>>Marking, packaging, transportation, storage>>A80 Marking, packaging, transportation, storage Comprehensive
publishing house:
China Standards PressISBN:
155066·1-31829Publication date:
2008-08-01Plan number:
20068195-T-469
Release date:
2008-04-01Drafter:
Zhao Haolibao, Wang Libing, Liu Rui, Zhang Yuan, etc.Drafting Organization:
Tianjin Institute of Inspection and Quarantine, Sinochem Chemical Standardization Institute, Jiangnan University, etc.Focal point Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationProposing Organization:
National Technical Committee on Hazardous Chemicals Management StandardizationPublishing Department:
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of ChinaCompetent Authority:
National Standardization Administration
Skip to download
Summary:
This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods. GB/T 21571-2008 Test method for the transition from deflagration to detonation of dangerous goods GB/T21571-2008 Standard download decompression password: www.bzxz.net
This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria", and the degree of consistency with them is non-equivalent. Its relevant technical content is completely consistent with the above manuals, and the standard text
format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251). The
responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting organizations of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Zhao Haolibao, Wang Libing, Liu Rui, Yu Zhirui, Zhang Yuan, Xu Chuanlai.
This standard is published for the first time.
GB/T 3639-2000 Cold drawn or cold rolled precision seamless steel tube
This standard specifies the equipment and materials, test procedures and test reports for the test methods required for the classification and grading of explosiveness in dangerous goods.
This standard corresponds to the United Nations "Recommendations on the Transport of Dangerous Goods Model Regulations" and the United Nations "Recommendations on the Transport of Dangerous Goods Manual of Tests and Criteria", and the degree of consistency with them is non-equivalent. Its relevant technical content is completely consistent with the above manuals, and the standard text
format has been edited according to GB/T1.1-2000.
This standard is proposed and managed by the National Technical Committee for Standardization of Dangerous Chemicals Management (SAC/TC251). The
responsible drafting unit of this standard: Tianjin Institute of Inspection and Quarantine Science and Technology.
Participating drafting organizations of this standard: Jiangnan University, Sinochem Chemical Standardization Research Institute, Tianjin Entry-Exit Inspection and Quarantine Bureau.
Main drafters of this standard: Zhao Haolibao, Wang Libing, Liu Rui, Yu Zhirui, Zhang Yuan, Xu Chuanlai.
This standard is published for the first time.
GB/T 3639-2000 Cold drawn or cold rolled precision seamless steel tube
Some standard content:
10-60-8002
#车国国
10-0-8002
osr oep oersop oo sponn otrd8002--11512 1/0
国国国祥中
D0E EE
8002---11512 1/80
800212517 1/
最和区心的研究体研究事能
新密器城
1 49-2
PCEa Or CWww.bzxZ.net
8002-1912 /
8002-12912 A/3
中:5
arnunrinuunr.
8002-2911./
a58tt-1+ 9839:
910EE389
rile*mNm
6002 ---12:12 J389
B02ILS!
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
#车国国
10-0-8002
osr oep oersop oo sponn otrd8002--11512 1/0
国国国祥中
D0E EE
8002---11512 1/80
800212517 1/
最和区心的研究体研究事能
新密器城
1 49-2
PCEa Or CWww.bzxZ.net
8002-1912 /
8002-12912 A/3
中:5
arnunrinuunr.
8002-2911./
a58tt-1+ 9839:
910EE389
rile*mNm
6002 ---12:12 J389
B02ILS!
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JG/T 3060-1999 Composite steel formwork
- GB/T 17980.101-2004 Pesticide-Guidelines for the field efficacy trials(II)-Part 101:Fungicides against pineappleal disease of sugarcane
- SY/T 5270-2000 Technical regulations for the design of high-pressure water injection pipeline accessories
- JB/T 7217-1994 General technical requirements for coating of separation machinery
- JB/T 7925.1-1995 Sliding bearings Single-layer bearing anti-friction alloy hardness test method
- HG/T 2365-1992 Determination of moisture content of poly(alkylene terephthalate) pellets
- JB/T 9918.2-1999 Technical requirements for high precision hob grinders
- GB/T 3171.2-1982 Determination of bulk density of aluminium powder - Volumetric method
- GB/T 27936-2011 Publication distribution terminology
- HG/T 3119-1998 Tire curing press test method
- GB 16915.3-2000 Switches for household and similar fixed electrical installations Part 2: Particular requirements Section 2: Remote control switches (RCS)
- SY/T 6537-2002 Gas and solution analysis methods for natural gas purification plants
- GB 19194-2003 General technical requirements for racing karts
- HG/T 2568-1994 Industrial sodium metasilicate
- GB/T 15381-1994 Performance requirements for electrical and audio equipment of conference systems
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com