JB/T 9169.13-1998 Process Management Guidelines Process Information

JB/T 9169.13-1998 JB/T 9169.13-1998 Process Management Guidelines Process Information JB/T9169.13-1998 Standard download decompression password: www.bzxz.net

ICS25.010
Machinery Industry Standard of the People's Republic of China
JB/T 9169.13—1998
Guide for technological management
Technological information
Published on November 16, 1998
National Bureau of Machinery Industry
Implemented on December 1, 1998
JB/T9169.131998
This standard is a revision of JB/Z338.1~338.1488 "Guide for technological management". Only editorial revisions were made during the revision, and the main technical content remained unchanged.
This standard replaces JB/Z338.1~338.1488 from the date of implementation. All appendices to this standard are informative appendices. This standard is proposed and managed by the Mechanical Science Research Institute. The responsible drafting unit of this standard: Mechanical Science Research Institute The main drafters of this standard: Ma Xianzhi, Li Qin, Shi Junwei, Wu Cheng, Du Shanyi. 1
1 Scopebzxz.net
Mechanical Industry Standard of the People's Republic of China
Guide for technological management
Technological information
Guidefor technological management-Technological information
This standard specifies the main contents of technological information, the collection, processing and management of technological information. This standard applies to technological information work for electromechanical products. 2 Basic requirements
JB/T9169.13-1998
Replaces JB/Z338.13-88
Technological information is an important means to conduct technological research and development and improve the technological level of enterprises. All enterprises should attach importance to and strengthen technological intelligence work.
Main contents of process intelligence
a) Research and use of new technologies, new processes, new materials and new equipment at home and abroad; b) Relevant new process standards, manuals and atlases; c) Relevant advanced process procedures or specifications; d) Relevant process research reports, papers and innovative achievements: e) Other reference materials and information. 4 Collection of process intelligence
Process intelligence can be collected by full-time process intelligence personnel and various professionals through the following channels: a) Consulting materials;
b) Conducting research
c) Professional intelligence network;
d) Studying or inspecting abroad, etc.
5 Processing of process intelligence
After the process intelligence is collected, it should be carefully analyzed, sorted, classified and numbered by a dedicated person. The original foreign materials should be translated and reviewed before being classified and numbered. The numbering should be convenient for computer storage and retrieval. 6 Management of process intelligence
6.1 After the process intelligence is processed, it should be sent to the information department for unified registration and storage. When professionals need it, they should retrieve it from the data room according to the prescribed procedures. 6.2 The data room should have a complete storage and borrowing system. 6.3 Enterprises with conditions should use computer management as much as possible. 6.4 In order to give full play to the role of process information data, the data should be continuously updated, and the new data catalog should be regularly reported to the relevant process professional departments. The State Machinery Industry Bureau approved on November 16, 1998 and implemented on December 1, 1998
JB/T9169.13—1998
Strengthen the exchange of process information. The various process specialties within the enterprise and the same industry in different factories should strengthen the exchange of industrial information and exchange information to promote the continuous improvement of the process level.
People's Republic of China
Mechanical Industry Standard
Process Management Guidelines Process Information
JB/T9169.13—1998
Published and issued by the Mechanical Science Research Institute
Printed by the Mechanical Science Research Institute
(No. 2 Shouti South Road, Beijing
100044)
Word count XXXXXX
Format 880×1230
01/16 Printing sheet X/X
Edition X in XX month, 19XX
Printing in xX month, 19XX
Printing number 1-XXX
Price XXX.XX yuan
XX-XXX
Mechanical Industry Standard Service Network: 861_16916
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.