INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 2856.5-1990 Punch die rolling guide die four guide column upper die

time: 2024-08-11 13:52:57
  • GB/T 2856.5-1990
  • Abolished

Basic Information

standard classification number

  • Standard ICS number:

    Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.30 Molding Equipment and Casting Equipment

  • China Standard Classification Number:

    Machinery>>Process Equipment>>J46 Mold

associated standards

Publication information

  • publishing house:

    China Standards Press

Other Information

  • Release date:

    1981-12-29

  • Review date:

    2004-10-14

  • Drafting Organization:

    Guilin Electrical Appliance Research Institute

  • Focal point Organization:

    National Technical Committee for Mould Standardization

  • Publishing Department:

    National Standardization Administration

  • Competent Authority:

    National Standardization Administration
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 2856.5-1990 Punch die rolling guide die seat four guide column upper die seat GB/T2856.5-1990 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Punch rolling guide die holder
Four-column upper die holder
Holder for ball side die sets for press toolsPunch holder for four plllar setsSubject content and scope of application
GB/T 2856.5—90
Replaces GB2856.5-81wwW.bzxz.Net
This standard specifies the materials, technical conditions, structural types and specifications of the four-column upper die holder for the punch rolling guide die holder. This standard applies to the punch rolling guide die holder. Reference standards
6 Technical conditions for punch die holder parts
GB/T 12446
GB9439 Grey cast iron parts
3 Materials, technical conditions, structural types and specifications of die holder3.1 Material: HT200GB9439. Aging treatment twice. 3.2 Technical conditions shall be in accordance with the provisions of GB/T12446. 3.3 The structure type and specifications are shown in the table.
Approved by the State Administration of Technical Supervision on July 23, 1990 and implemented on May 1, 1991
8.4 Marking example:
GB/T2856.5--90
Die perimeter L=200mm, B=160mm, thickness H=45mm, four-guide column upper die seat: upper die seat 200×160×45GB/T2856.570
Four-die perimeter
12516040
410320||tt ||Note: The shape and plane size of the press plate are determined by the manufacturer. GB/T2856.5-~90
Additional Notes:
This standard is proposed by the Ministry of Machinery and Electronics Industry of the People's Republic of China. Basic
This standard is under the jurisdiction of the National Mold Standardization Technical Committee. This standard was drafted by the Mold Branch of Guilin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry. The main drafters of this standard are Wang Huachang and Qin Guangwei. This standard is entrusted to the Mold Branch of Guilin Electric Science Research Institute of the Ministry of Machinery and Electronics Industry for interpretation. 28
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com