GB 16198-1996 Hygienic standard for cotton dust in workshop air
time:
2024-08-06 06:48:11
- GB 16198-1996
- in force
Standard ID:
GB 16198-1996
Standard Name:
Hygienic standard for cotton dust in workshop air
Chinese Name:
车间空气中棉尘卫生标准
Standard category:
National Standard (GB)
-
Date of Release:
1996-04-03 -
Date of Implementation:
1996-09-01
Standard ICS number:
Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplaceChina Standard Classification Number:
Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
Release date:
1996-04-03Review date:
2004-10-14Drafting Organization:
Shanghai Medical UniversityFocal point Organization:
Ministry of HealthPublishing Department:
State Administration of Technical Supervision Ministry of Health of the People's Republic of ChinaCompetent Authority:
Ministry of Health
Skip to download
Summary:
This standard specifies the maximum permissible concentration of cotton dust in workshop air and its monitoring and inspection methods. This standard is applicable to cotton textile mills (pure cotton workshops) and other enterprises using cotton. GB 16198-1996 Hygienic Standard for Cotton Dust in Workshop Air GB16198-1996 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for cotton dust in the air of workplace
1 Subject content and scope of applicationwwW.bzxz.Net
This standard specifies the maximum permissible concentration of cotton dust in the air of workplace and its monitoring and inspection methods. This standard is applicable to cotton textile mills (pure cotton workshops) and other enterprises using cotton. 2 Referenced standards
GB5748 Determination of dust in workplace air 3 Hygienic requirements
The maximum permissible concentration of cotton dust with free silica below 10% in the air of workplace is 3mg/m3. 4 Monitoring and inspection methods
The determination of total dust and free silica in the air of workplace shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health administrative departments at all levels are responsible for supervising the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by Shanghai Medical University. The main drafters of this standard were Lu Peilian and Ye Bi. GB16198-1996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, entrusted by the Ministry of Health. Approved by the State Bureau of Technical Supervision on April 3, 1996424
Implementation on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Health standard for cotton dust in the air of workplace
1 Subject content and scope of applicationwwW.bzxz.Net
This standard specifies the maximum permissible concentration of cotton dust in the air of workplace and its monitoring and inspection methods. This standard is applicable to cotton textile mills (pure cotton workshops) and other enterprises using cotton. 2 Referenced standards
GB5748 Determination of dust in workplace air 3 Hygienic requirements
The maximum permissible concentration of cotton dust with free silica below 10% in the air of workplace is 3mg/m3. 4 Monitoring and inspection methods
The determination of total dust and free silica in the air of workplace shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health administrative departments at all levels are responsible for supervising the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by Shanghai Medical University. The main drafters of this standard were Lu Peilian and Ye Bi. GB16198-1996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, entrusted by the Ministry of Health. Approved by the State Bureau of Technical Supervision on April 3, 1996424
Implementation on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JG/T 129-2000 Polyvinyl chloride (PVC) door and window pulleys
- GB/T 5188-1985 Brass foil
- JB/T 6383.3-1992 Cone seal welding tee pipe joint
- JB/T 56037-1999 Quality classification of polyester film, polyester fiber, nonwoven fabric and soft composite materials
- JGJ 34-1986 Technical test procedures for construction machinery
- GB/T 2424.1-1989 Basic environmental testing procedures for electrical and electronic products - Guidelines for high and low temperature testing
- GB/T 9385-1988 Guidelines for the preparation of computer software requirements specifications
- JB/T 4328.10-1999 General technical requirements for ductile iron castings for electrical equipment
- JB/T 9955.2-1999 Radial forging machine accuracy
- GB/T 11798.9-2001 Technical requirements for the verification of motor vehicle safety testing equipment Part 9: Technical requirements for the verification of flat brake test benches
- JB/T 9177-1999 Structural elements of steel die forgings
- JB 20010-2004 Three-dimensional mixer
- JB/T 5840-1991 JA series bipolar power transistors for switches above 50A
- QB/T 2328-1997 Clothing Mechanical Portrait Machine
- GB/T 7026-1986 Directives for the work of standardization--Rules for drafting standards of information classifying and coding
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com