DIN 189 T型头螺栓；主要尺寸下载 - 国外标准

标准信息

STANDARD INFORMATION

标准编号: DIN 189
所属分类: DIN 德国标准
发布机构: DIN
版本年份: 1971
文件语言: 英语
文件格式: PDF
文件页数: 6 页
文件大小: 4.41 MB

中文名称为参考译名，文件语言以原文为准。

· 更新：2026-09-23

标准简介

OVERVIEW

中文简介

该标准规定了T型头螺栓的主要尺寸、公差及几何特性。适用于M8至M80×6规格的钢制T型头螺栓，涵盖螺纹尺寸、杆部长度及质量参考值。

English summary

This standard specifies the main dimensions, tolerances, and geometric characteristics of T-head bolts. It applies to steel T-head bolts with sizes ranging from M8 to M80×6, covering thread dimensions, shank lengths, and approximate mass values.

以上为根据文件整理的内容简介。

标准内容预览

DOCUMENT PREVIEW

DIN 189PDF 第 1 页 · 原页码 1

Antriebselemente
Sohlplatten
Hauptmaße

Driving components; base plates for pedestal slide bearings; dimensions

Maße in mm

Die Sohlplatten brauchen der bildlichen Darstellung nicht zu entsprechen; nur die angegebenen Maße sind einzuhalten.

Für a = 290 bis 650 mm

Für a = 790 und 910 mm

Bezeichnung einer Sohlplatte von Länge l₁ = 510 mm:

Sohlplatte DIN 189 – 510

l₁	b	c	f₁	f₂	l₂	l₃	l₄	l₅	s₁ 1)	s₂	t 2)	verwendbar für Steh-Gleitlager nach DIN 118			verwendbar für Stehlagergehäuse für Wälzlager					Ge- wicht (7,25 kg/dm3) ≈	Hammer- schraube mit Nase nach DIN 188
l₁	b	c	f₁	f₂	l₂	l₃	l₄	l₅	s₁ 1)	s₂	t 2)	Form	G	K	h₁	DIN 736	DIN 737	DIN 738	DIN 739	Ge- wicht (7,25 kg/dm3) ≈	Hammer- schraube mit Nase nach DIN 188	h₂
290	55	30	30	–	230	170	–	–	M 12	15	13	max.	25	–	90						2,5	M 10
290	55	30	30	–	230	170	–	–	M 12	15	13	max.	30	–	90						2,5	M 10
330	65	35	35	–	260	185	35	–	M 16	20	15	max.	35	25	100	SN 505		SN 205		75	3	M 12
330	65	35	35	–	260	185	35	–	M 16	20	15	max.	40	30	100	SN 506	SN 605	SN 206	SN 305	85	3	M 12
360	75	40	40	–	290	205	35	–	M 16	20	15	max.	45	35	115	SN 508		SN 208	SN 307	100	4	M 12
360	75	40	40	–	290	205	35	–	M 16	20	15	max.	50	40	115	SN 509	SN 608	SN 209	SN 308	100	4	M 12
410	85	45	45	–	330	245	45	–	M 20	25	19	max.	55	45	135	SN 511	SN 609	SN 211	SN 309	115	6	M 16
410	85	45	45	–	330	245	45	–	M 20	25	19	max.	60	50	135	SN 512	SN 610	SN 212	SN 310	115	6	M 16
450	95	50	50	–	360	275	45	–	M 20	25	19	max.	70	55	150	SN 513	SN 611	SN 213	SN 311	130	8	M 16
450	95	50	50	–	360	275	45	–	M 20	25	19	max.		60	150	SN 515	SN 612	SN 215	SN 312	130	8	M 16
510	110	55	55	–	410	315	55	–	M 24	30	24	max.	80	70	165	SN 516	SN 613	SN 216	SN 313	150	10	M 20
570	125	60	60	–	460	345	55	–	M 24	30	24	max.	90	80	185	SN 518	SN 615	SN 218	SN 315	160	14	M 20
650	145	65	65	–	520	385	65	–	M 30	36	28	max.	100	90	205	SN 520	SN 617	SN 220	SN 317	177	19	M 24
650	145	65	65	–	520	385	65	–	M 30	36	28	max.	110	90	205	SN 520		SN 220		177	19	M 24
790	180	90	75	35	650	435	65	510	M 30	36	28	max.	125	100	240	SN 522		SN 222		200	33	M 24
																SN 524		SN 224		215
													140	110		SN 526		SN 226		225
910	230	110	90	40	750	535	85	600	M 36	42	35	max.	160	125	290	SN 528		SN 228		240	55	M 30
910	230	110	90	40	750	535	85	600	M 36	42	35	max.	180	140	290	SN 532		SN 232		260	55	M 30

1) Steinschrauben nach DIN 529 sind besonders zu bestellen.

2) T-Nuten für Hammerschrauben nach DIN 649, für Hammerschrauben mit Nase nach DIN 188

Zulässige Abweichungen für Maße ohne Toleranzangaben an:

– bearbeiteten Flächen: DIN 7168 – mittel

– unbearbeiteten Flächen: DIN 1686 – GTB 18

Werkstoff: GG-20 nach DIN 1691

Normenausschuß Maschinenbau (NAM) im DIN Deutsches Institut für Normung e. V.

Normenausschuß Gleitlager (NGL) im DIN

Arbeitsausschuß Wälzlager (AWL) im DIN

1

DIN 189PDF 第 2 页 · 原页码 2

Page 2 DIN 188

Thread size d	M 8	M 10	M 12	M 16	M 20	M 24	M 30
P ¹⁾	1,25	1,5	1,75	2	2,5	3	3,5
b (auxiliary size)	²⁾	22	26	30	38	46	54	66
	³⁾	-	-	-	44	52	60	72
	⁴⁾	-	-	-	-	-	-	-
d_s	Nominal size	8	10	12	16	20	24	30
	max.	8,58	10,58	12,7	16,7	20,84	24,84	30,84
	min.	7,42	9,42	11,3	15,3	19,16	23,16	29,16
e ⁵⁾	min.	9,24	11,81	14,17	19,32	24,33	29,48	37,2
k	Nominal size	5,5	7	8	10,5	13	15	19
	max.	5,9	7,45	8,75	11,4	13,9	15,9	20
	min.	5,1	6,55	7,25	9,6	12,1	14,1	18
n	Nominal size	8	10	12	16	20	24	30
	max.	8,75	10,75	12,9	16,9	21	25	31
	min.	7,25	9,25	11,1	15,1	19	23	29
m	Nominal size	18	21	26	30	36	43	54
	max.	18,9	22	27	31	37,25	44,25	55,5
	min.	17,1	20	25	29	34,75	41,75	52,5
r₁	≈	0,5	0,5	1	1	1	1,6	1,6
r₂ ⁶⁾	max.	1,2	1,5	1,8	2,4	3	3,6	4,5
Nominal size		l		Shank lengths l_s and l_g
	max.	min.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.
30	28,95	31,05	3,75	10	7,5	15
(35)	33,75	36,25	3,75	10	7,5	15
40	38,75	41,25	3,75	10	7,5	15	10,25	19
(45)	43,75	46,25	16,75	23	7,5	15	10,25	19
50	48,75	51,25	21,75	28	16,5	24	10,25	19	15	25
(55)	53,5	56,5	26,75	33	21,5	29	16,25	25	15	25
60	58,5	61,5	31,75	38	26,5	34	21,25	30	15	25	18,5	31
(65)	63,5	66,5	36,75	43	31,5	39	26,25	35	15	25	18,5	31
70	68,5	71,5	41,75	48	36,5	44	31,25	40	22	32	18,5	31	22	37
(75)	73,5	76,5	46,75	53	41,5	49	36,25	45	27	37	18,5	31	22	37
80	78,5	81,5	51,75	58	46,5	54	41,25	50	32	42	21,5	34	22	37
90	88,25	91,75			56,5	64	51,25	60	42	52	31,5	44	22	37	25,5	43
100	98,25	101,75			66,5	74	61,25	70	52	62	41,5	54	22	37	25,5	43
(110)	108,25	111,75					71,25	80	62	72	51,5	64	41	56	25,5	43
120	118,25	121,75					81,25	90	72	82	61,5	74	51	66	36,5	54
(130)	128	132							76	86	65,5	78	55	70	40,5	58
140	138	142							86	96	75,5	88	65	80	50,5	68
(150)	148	152							96	106	85,5	98	75	90	60,5	78
160	156	164							106	116	95,5	108	85	100	70,5	88
(170)	166	174									105,5	118	95	110	80,5	98
180	176	184									115,5	128	105	120	90,5	108
(190)	185,4	194,6									125,5	138	115	130	100,5	118
200	195,4	204,6									135,5	148	125	140	110,5	128

Lengths above 400 mm shall be graded in 20 mm steps. Bracketed sizes should be avoided if possible. T-head bolts with double nib are normally manufactured in sizes for which shank lengths have been specified.

l_g max. = l (nominal lengths) – b (auxiliary size) shall apply for screws with lengths below the stepped line; l_s min. = l_g max. – 5 P.

1) P = pitch of thread (coarse pitch thread).

2) For l up to and including 120 mm.

3) For l above 120 up to and including 200 mm.

4) For l exceeding 200 mm.

5) e min. = n min. × 1,41 – 0,82 × r₂ max.

6) r₂ max. = 0,15 d.

2

DIN 189PDF 第 3 页 · 原页码 3

DIN 188

Thread size d	M 36	M 42	M 48	M 56	M 64	M 72 × 6	M 80 × 6
P ¹⁾	4	4,5	5	5,5	6	–	–
b (auxiliary size)	²⁾	78	–	–	–	–	–	–
	³⁾	84	96	108	124	130	156	172
	⁴⁾	97	109	121	137	143	169	185
d_s	Nominal size	36	42	48	56	64	72	80
	max.	37	43	49	57,2	65,2	73,2	81,2
	min.	35	41	47	54,8	62,8	70,8	78,8
e ⁵⁾	min.	44,57	52,29	60,0	69,96	80,25	90,55	100,85
k	Nominal size	23	26	30	35	40	45	50
	max.	24	27	31	36,25	41,25	46,25	51,25
	min.	22	25	29	33,75	38,75	43,75	48,75
n	Nominal size	36	42	48	56	64	72	80
	max.	37,25	43,25	49,25	57,5	65,5	73,5	81,5
	min.	34,75	40,75	46,75	54,5	62,5	70,5	78,5
m	Nominal size	66	80	88	102	115	128	140
	max.	67,5	81,5	89,75	103,75	116,75	130	142
	min.	64,5	78,5	86,25	100,25	113,25	126	138
r₁ ≈	2	2	2	3	3	4	4
r₂ ⁶⁾ max.	5,4	6,3	7,2	8,4	9,6	10,8	12
Shank lengths l_s and l_g
Nominal size	l min.	l max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.	l_s min.	l_g max.
120	118,25	121,75	35	55
(130)	128	132	35	55
140	138	142	36	56	31,5	54
(150)	148	152	46	66	31,5	54	47	72
160	156	164	56	76	41,5	64	47	72
(170)	166	174	66	86	51,5	74	47	72
180	176	184	76	96	61,5	84	47	72	55,5	83
(190)	185,4	194,6	86	106	71,5	94	57	82	55,5	83
200	195,4	204,6	96	116	81,5	104	67	92	55,5	83	65	95	75	105	85	115
220	215,4	224,6	103	123	88,5	111	74	99	55,5	83	65	95	75	105	85	115
240	235,4	244,6	123	143	108,5	131	94	119	75,5	103	65	95	75	105	85	115
260	254,8	265,2			128,5	151	114	139	95,5	123	77	117	75	105	85	115
280	274,8	285,2					134	159	115,5	143	107	137	81	111	85	115
300	294,8	305,2							135,5	163	127	157	101	131	85	115
320	314,3	325,7									147	177	121	151	105	135
340	334,3	345,7									167	197	141	171	125	155
360	354,3	365,7											161	191	145	175
380	374,3	385,7													165	195
400	394,3	405,7													185	215

Lengths above 400 mm shall be graded in 20 mm steps. Bracketed sizes should be avoided if possible. T-head bolts with double nib are normally manufactured in sizes for which shank lengths have been specified.

l_g max. = l (nominal lengths) – b (auxiliary size) shall apply for screws with lengths below the stepped line;

l_s min. = l_g max. – 5 P.

For 1) to 6), see page 2.

3

DIN 189PDF 第 4 页 · 原页码 4

3 Technical delivery conditions

Material	Steel
General requirements	As specified in DIN 267 Part 1.
Thread	Tolerance class	8g
Thread	Standard	DIN 13 Part 15
Mechanical properties	Property class (material)	For sizes up to and including M 36: 3.6 or 4.6, at the manufacturer's discretion. For sizes exceeding M 36: subject to agreement. Other property classes or materials shall be subject to agreement.
Mechanical properties	Standard	ISO 898 Part 1
Permissible deviations, geometrical tolerances	Product grade	C
Permissible deviations, geometrical tolerances	Standard	ISO 4759 Part 1
Surface finish	As processed. DIN 267 Part 9 shall apply with regard to electroplating. DIN 267 Part 10 shall apply with regard to hot-dip galvanizing.
Acceptance inspection	DIN 267 Part 5 shall apply with regard to acceptance inspection.

4 Designation

Designation of an M 20 T-head bolt, of nominal length l = 120 mm:

T-head bolt DIN 188 – M 20 × 120

4

DIN 189PDF 第 5 页 · 原页码 5

5 Masses

Thread size d	M 8	M 10	M 12	M 16	M 20	M 24	M 30	M 36	M 42	M 48	M 56	M 64	M 72 × 6	M 80 × 6
l	Mass (7,85 kg/dm³), in kg per 1000 units, approximately
30	18,2	30,0
(35)	19,7	32,5
40	20,2	35,0	55,1
(45)	22,2	37,5	58,7
50	24,2	40,6	62,3	117
(55)	26,2	43,7	66,7	124
60	28,2	46,8	71,1	130	220
(65)	30,2	49,9	74,5	137	230
70	32,2	53,0	78,9	145	240	377
(75)	34,2	56,1	84,3	153	250	392
80	36,2	59,2	88,7	161	262	407
90		65,4	97,6	177	287	437	727
100		71,6	106	193	302	467	773
(110)			115	209	327	502	819
120			124	225	351	538	874	1380
(130)				241	376	583	930	1450
140				257	401	618	985	1530	2220
(150)				273	426	654	1040	1610	2310	3180
160				289	450	689	1090	1690	2420	3300
(170)					475	725	1150	1770	2530	3420
180					500	760	1200	1850	2640	3540	4640
(190)					525	796	1260	1930	2750	3680	4820
200					550	831	1310	2010	2860	3820	5000	6 800	8 100	10 200
220								2170	3080	4080	5360	7 300	8 730	11 000
240								2330	3300	4360	5720	7 800	9 360	11 800
260									3520	4640	6080	8 300	9 990	12 600
280										4920	6440	8 800	10 620	13 400
300											6800	9 300	11 250	14 200
320												9 800	11 900	15 000
340												10 300	12 500	15 800
360													13 100	16 600
380														17 400
400														18 200

The values of mass specified are for guidance only and cover the commercial sizes.

5

预览内容由文件识别整理，表格、公式及文字请以原始文件为准。

原文图片预览

PAGE IMAGES

下载标准文件

DIN 189

英语 · PDF · 6 页 · 4.41 MB

前往网盘下载 ↗

DIN 13 Part 15	ISO metric screw threads; fundamental deviations and tolerances for screw threads of 1 mm and larger
DIN 78	Thread ends; lengths of projection of thread ends for ISO metric screw threads as defined in DIN 13
DIN 267 Part 1	Fasteners; technical delivery conditions; general requirements
DIN 267 Part 5	Fasteners; technical delivery conditions; acceptance inspection (modified version of ISO 3269, 1984 edition)
DIN 267 Part 9	Fasteners; technical delivery conditions; components with electroplated coatings
DIN 267 Part 10	Fasteners; technical delivery conditions; hot dip galvanized components
DIN 649	T-slots for T-head bolts
ISO 898 Part 1	Mechanical properties of fasteners; bolts, screws and studs
ISO 4759 Part 1	Tolerances for fasteners; bolts, screws and nuts with thread diameters between 1,6 mm (inclusive) and 150 mm (inclusive) and product grades A, B and C

T型头螺栓；主要尺寸

标准信息

标准简介

中文简介

English summary

相关标签

标准内容预览

Antriebselemente
Sohlplatten
Hauptmaße

Page 2 DIN 188

DIN 188

3 Technical delivery conditions

4 Designation

5 Masses

Standards referred to

Previous editions

Amendments

International Patent Classification

原文图片预览

下载标准文件

T型头螺栓；主要尺寸

标准信息

标准简介

中文简介

English summary

相关标签

标准内容预览

AntriebselementeSohlplattenHauptmaße

Page 2 DIN 188

DIN 188

3 Technical delivery conditions

4 Designation

5 Masses

Standards referred to

Previous editions

Amendments

International Patent Classification

原文图片预览

下载标准文件

Antriebselemente
Sohlplatten
Hauptmaße