金属的阴极保护 第1部分：管道和电缆

LICENCE

for

Licensee:

Date:

Click on the red box above to activate the Licence Agreement scroll bar.

WEB LINKS

• Check if this document is current
• Find similar documents
• Visit our website

International Standards on-line at infostore.saiglobal.com/store

1

Australian Standard^TM

Cathodic protection of metals

Part 1: Pipes and cables

2

This Australian Standard was prepared by Committee MT-014, Corrosion of Metals. It was approved on behalf of the Council of Standards Australia on 28 April 2004 and published on 3 June 2004.

The following are represented on Committee MT-014:

• Australasian Corrosion Association
• Australasian Institute of Metal Finishing
• Australian Chamber of Commerce and Industry
• Australian Electrolysis Committee
• Australian Paint Manufacturers' Federation
• Australian Paint Approval Scheme
• Austroads
• Bureau of Steel Manufacturers of Australia
• Department of Defence
• Division of Building, Construction and Engineering, CSIRO
• Galvanizers Association of Australia
• Telstra
• United Water International
• Water Corporation of Western Australia

Keeping Standards up-to-date

Standards are living documents which reflect progress in science, technology and systems. To maintain their currency, all Standards are periodically reviewed, and new editions are published. Between editions, amendments may be issued. Standards may also be withdrawn. It is important that readers assure themselves they are using a current Standard, which should include any amendments which may have been published since the Standard was purchased.

Detailed information about Standards can be found by visiting the Standards Web Shop at www.standards.com.au and looking up the relevant Standard in the on-line catalogue.

Alternatively, the printed Catalogue provides information current at 1 January each year, and the monthly magazine, The Global Standard, has a full listing of revisions and amendments published each month.

Australian Standards^TM and other products and services developed by Standards Australia are published and distributed under contract by SAI Global, which operates the Standards Web Shop.

We also welcome suggestions for improvement in our Standards, and especially encourage readers to notify us immediately of any apparent inaccuracies or ambiguities. Contact us via email at mail@standards.org.au, or write to the Chief Executive, Standards Australia International Ltd, GPO Box 5420, Sydney, NSW 2001.

This Standard was issued in draft form for comment as DR 03485.

3

Australian Standard^TM

Cathodic protection of metals

Part 1: Pipes and cables

Originated as AS 2832.1—1985.

Previous edition AS/NZS 2832.1:1998.

Revised and designated as AS 2832.1—2004.

COPYRIGHT

© Standards Australia International

All rights are reserved. No part of this work may be reproduced or copied in any form or by any means, electronic or mechanical, including photocopying, without the written permission of the publisher.

Published by Standards Australia International Ltd
GPO Box 5420, Sydney, NSW 2001, Australia

ISBN 0 7337 6043 0

4

PREFACE

This Standard has been prepared by the Australian members of the Joint Standards Australia/Standards New Zealand Committee MT-014, Corrosion of Metals, to supersede AS/NZS 2832.1:1998, Cathodic protection of metals, Part 1: Pipes and cables.

After consultation with stakeholders in both countries, Standards Australia and Standards New Zealand decided to develop this Standard as an Australian Standard rather than an Australian/New Zealand Standard.

The objective of this Standard is to specify the technical requirements for the cathodic protection of buried pipes and cables.

The objective of this revision is to cater for changes in government legislation, which affect stray current control on cathodic protection systems on structures.

This Standard is Part 1 of the AS 2832 series of Standards. The other parts are as follows:

There are no International Standards (ISO) on the cathodic protection of metals.

The terms ‘normative’ and ‘informative’ have been used in this Standard to define the application of the appendix to which they apply. A ‘normative’ appendix is an integral part of a Standard, whereas an ‘informative’ appendix is only for information and guidance.

5

CONTENTS

6