
GB/T 3760-1983 Butt nuts for ferrule type pipe fittings
time:
2024-08-10 19:55:36
- GB/T 3760-1983
- Abolished
Standard ID:
GB/T 3760-1983
Standard Name:
Butt nuts for ferrule type pipe fittings
Chinese Name:
卡套式管接头用对接螺母
Standard category:
National Standard (GB)
-
Date of Release:
1983-06-17 -
Date of Implementation:
1984-04-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
21.060.60;China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced JB 1986-1977; replaced by GB/T 3760-2008
Release date:
1983-06-17Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation

Skip to download
Summary:
This standard is only applicable to ferrule-type butt joints. GB/T 3760-1983 Butt nuts for ferrule-type pipe joints GB/T3760-1983 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Bite type tube fittings-Nuts for butt joints
This standard is only applicable to butt tube fittings of the ferrule type. Marking example:
Nominal pressure J grade, pipe: butt nut with outer diameter D. of 14mm J14 GB 3760—83
National Bureau of Standards 1983-06~17 Issued
621.643.4
:621.882/.887
GB 3760—88
1984-04-01 Implementation
Nominal pipe
Pressure outer diameter
M12×1.25
M24 ×1.5
M30×2
M33×2
M36×2
M42×2
M45×2
M48 ×2
M52×2
M30×2
M33×2
M36×2Www.bzxZ.net
M39×2
3760—83
Nominal size limit deviation
Note: (The weight is a calculated value, and the specific gravity is 7.85kg/dt. 1.5
②Under the condition that it does not affect the use, the L size is allowed to be made into a hexagonal shape with full length. The technical conditions shall be in accordance with the provisions of GB3765-83. Additional remarks:
This standard is issued by the Machinery Industry of the People's Republic of China The Ministry proposed this standard, which is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. 17.31
(kg/100 pieces)
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Audio Parts, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the Seventh () Eighth Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin. From the date of implementation of this standard, the original Ministry standard JB1986-77 "Butt nuts for tube fittings" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Bite type tube fittings-Nuts for butt joints
This standard is only applicable to butt tube fittings of the ferrule type. Marking example:
Nominal pressure J grade, pipe: butt nut with outer diameter D. of 14mm J14 GB 3760—83
National Bureau of Standards 1983-06~17 Issued
621.643.4
:621.882/.887
GB 3760—88
1984-04-01 Implementation
Nominal pipe
Pressure outer diameter
M12×1.25
M24 ×1.5
M30×2
M33×2
M36×2
M42×2
M45×2
M48 ×2
M52×2
M30×2
M33×2
M36×2Www.bzxZ.net
M39×2
3760—83
Nominal size limit deviation
Note: (The weight is a calculated value, and the specific gravity is 7.85kg/dt. 1.5
②Under the condition that it does not affect the use, the L size is allowed to be made into a hexagonal shape with full length. The technical conditions shall be in accordance with the provisions of GB3765-83. Additional remarks:
This standard is issued by the Machinery Industry of the People's Republic of China The Ministry proposed this standard, which is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. 17.31
(kg/100 pieces)
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Audio Parts, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the Seventh () Eighth Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin. From the date of implementation of this standard, the original Ministry standard JB1986-77 "Butt nuts for tube fittings" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 3586-1996 Basic parameters and technical requirements for rotary induction synchronizers
- JB/T 970-1977 Welded straight pipe joint
- QB/T 3631-1999 聚氯乙烯塑料波纹电线管
- QB/T 2474-2000 Pin mortise door lock
- GB/T 4330-2003 Agricultural trailer
- HG/T 21634-1988 Forged steel socket welding pipe fittings
- JB/T 5253.3-1991 Technical conditions for steam turbine random special tools Cylinder lifting tools
- GB/T 39321-2020 Specification for electronic contract forensics process
- GB/T 5646-1985 Expanded pipe sockets
- HG/T 3531-1985 Determination of water content in industrial circulating cooling water scale and corrosion products
- HG/T 2445-1993 Rubber rollers for electronic typing (printing) machines
- GB 6613-1986 TC4 titanium alloy plates for important purposes
- GB/T 15275-1994 8-bit microcomputer STD bus
- QB/T 1433.5-2005 Biscuits and cookies
- JR/T 0183-2020 Investor identification code for securities and futures industry
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com