JB/T 9158.2-1999 Dimensions of slitting tool holder for horizontal multi-spindle automatic lathe

JB/T 9158.2-1999 JB/T 9158.2-1999 Horizontal multi-spindle automatic lathe auxiliary tool longitudinal cutting reverse clamp dimensions JB/T9158.2-1999 Standard download decompression password: www.bzxz.net

1CS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9158.1~9158.13—1999
Accessories of multi-spindle horizuntal automatic lathes
Promulgated on 1999-05-20
National Bureau of Machinery Industry
Implemented on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Accessories of multi-spindle horizuntal automatic lathes
Slitting tool holder, dimensions
Acresrdries of malti-spindie horizohtal automaticie lachesE.pngilndinalcuttinyreversalpost-Dlienskons standard specifies the type and size of the horizontal multi-spindle automatic lathe with the cutter 2 Reference standards
JB/T9158.2-1999
Generation #23T152 012.2-90
The following standards contain provisions that are generally cited in this standard and constitute the provisions of this standard. When this standard is issued, the latest version is valid. All versions may be revised. The parties using this standard should explore the possibility of using the latest version of the following standards. G268-1285 Speed ​​frame height
GB/T 158--1996
3 Type and size
Machine 1 T-shaped slot and anti-bolt
The type and size are as shown in the figure and the provisions. Approved by the State Machinery Industry Bureau on May 20, 1990 2[-0H3.(0)-01 Implementationwww.bzxz.net
Marking example:
JB Hall 9158.2-1999
Marking of the longitudinal cutting reverse tool holder with H=68m:
68JB/T9158.2-1999
Applicable machine descriptions
C2150.6P, C2216.6
C263.6, C2220.6
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.