JB/T 989-1977 Welded right angle pipe fittings
time:
2024-07-15 00:03:58
- JB/T 989-1977
- in force
Standard ID:
JB/T 989-1977
Standard Name:
Welded right angle pipe fittings
Chinese Name:
焊接式直角管接头体
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1977-01-17 -
Date of Implementation:
1977-05-01
China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
JB 989-1967; replaced by JB/T 966-2005
Description (Translated English) / downloadSkip to download
Summary:
JB/T 989-1977 Welded right angle pipe joint body JB/T989-1977 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Standard of the First Machinery Industry Department of the People's Republic of China
Welded right-angle pipe joint body
Marking example:
Right-angle pipe joint body with a pipe outer diameter of 28mm: Joint body 28JB989--77
First Machinery Industry Department of the People's Republic of China, First Machinery Industry Department Standardization Research Institute
JB989-77
Replace JB989-67bzxZ.net
Other 2||t t||May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc.
Total 2 pages Page 2
Outer diameter of pipe
M12×1.25
-0.20M22×1.5
M36×2
M42×2
M52×2
JB989—77
Technical conditions are in accordance with the provisions of JB1003-77. 32
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Welded right-angle pipe joint body
Marking example:
Right-angle pipe joint body with a pipe outer diameter of 28mm: Joint body 28JB989--77
First Machinery Industry Department of the People's Republic of China, First Machinery Industry Department Standardization Research Institute
JB989-77
Replace JB989-67bzxZ.net
Other 2||t t||May 1, 1977
Jinan Foundry and Forging Machinery Research Institute, etc.
Total 2 pages Page 2
Outer diameter of pipe
M12×1.25
-0.20M22×1.5
M36×2
M42×2
M52×2
JB989—77
Technical conditions are in accordance with the provisions of JB1003-77. 32
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- QB/T 1671-1998 General technical requirements for special punching equipment for physical property testing of paper and paperboard
- JJG 274-2007 Verification Regulation of Double Tube Mercury Barometer
- GB 9794-1988 Test methods for thermal sprayed zinc and zinc alloy coatings
- JB/T 5958-1991 Loader working device fatigue test method
- GB/T 18758-2002 Universal technical riquirements of anti-counterfeiting nuclear products
- GB/T 3903.5-1995 General inspection methods for footwear - Appearance inspection methods
- GB/T 8804.1-2003 Determination of tensile properties of thermoplastic pipes Part 1: General principles of test methods
- JJG 926-1997 Verification Regulation of the Record Pressure Gauge Pressure Vacuum Gauge and Vacuum Gauge
- GB/T 13823.7-1994 Methods for the calibration of vibration and shock pick－ups－Primary vibration calibration by comparison of phase angles
- GB/T 2670.2-2004 Hexagon socket countersunk head self-tapping screws
- JB/T 10172-2000 D-type reducer for cement mill
- GB 19521.1-2004 Safety specification for inspection of hazardous properties of flammable solid dangerous goods
- GB 15258-1999 Provisions for the preparation of chemical safety labels
- GB 18095-2000 Emulsion explosives
- GB 6962-1986 150:00, 1:1000, 1=2000 scale topographic map aerial photography specifications
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com