JB/T 5824.5-1991 Classification and codes of special equipment for wires and cables
time:
2024-06-25 21:08:46
- JB/T 5824.5-1991
- Abolished
Standard ID:
JB/T 5824.5-1991
Standard Name:
Classification and codes of special equipment for wires and cables
Chinese Name:
电线电缆专用设备 产品类别划分与代号
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1991-10-17 -
Date of Implementation:
1992-10-01 -
Date of Expiration:
2008-11-01
China Standard Classification Number:
Electrical>>Electrical Production Equipment>>K91 Electrical Material Production Equipment
alternative situation:
Replaced by JB/T 5824.5-2008
Drafter:
Ou Xuecheng, Wang YuhuiDrafting Organization:
Shanghai Cable Research InstituteFocal point Organization:
Shanghai Cable Research Institute of the Ministry of Machinery and Electronics IndustryProposing Organization:
Shanghai Cable Research Institute of the Ministry of Machinery and Electronics IndustryPublishing Department:
Ministry of Machinery and Electronics Industry
Skip to download
Summary:
This standard specifies the classification and code of wire and cable special reels and dies. This standard applies to the compilation of wire and cable special reels and metal wire drawing die product models JB/T 5824.5-1991 Wire and cable special equipment product classification and code JB/T5824.5-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Mechanical Industry Standard of the People's Republic of China
Special Equipment for Wires and Cables
Product Category Classification and Code
Part 5 Reels and Dies
1 Subject Content and Scope of Application
1.1 This standard specifies the classification and code of special reels and dies for wires and cables. 1.2 This standard applies to the preparation of product models of special reels and metal wire drawing dies for wires and cables. JB/T5824.5-91
1.3 The preparation of product models of reels and dies shall comply with the requirements of JB/T5824.1-91 "Classification and Code of Special Equipment for Wires and Cables
Part 1 General Provisions".
Classification and Code
The classification and code of reels shall comply with the provisions of Table 1. 2.1
The classification and code of dies shall comply with the provisions of Table 2. 2.2
Table 1 Plate
Carbide
Approved by the Ministry of Machinery and Electronics Industry on October 17, 1991
For winding wire
For cable delivery
Metal wire drawing die
Non-ferrous metal rod
Large shaft hole
Small shaft hole
Cylindrical
Conical
Non-metal
1992—10-01Implementation
JB/15824.5||t t||Continued Table 2
Non-ferrous metal bars
Square and rectangular steels
Square and rectangular non-ferrous
Hexagonal steels
Hard alloy
Hexagonal non-ferrous
Metal materials
Non-ferrous metals
Non-ferrous metal wiresbzxZ.net
Natural diamond
Non-ferrous metal wires
Artificial diamond
Additional notes:
This standard was proposed and managed by the Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Shanghai Cable Research Institute and other units. The main drafters of this standard are Ou Xuecheng and Wang Yuhui. 120
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Special Equipment for Wires and Cables
Product Category Classification and Code
Part 5 Reels and Dies
1 Subject Content and Scope of Application
1.1 This standard specifies the classification and code of special reels and dies for wires and cables. 1.2 This standard applies to the preparation of product models of special reels and metal wire drawing dies for wires and cables. JB/T5824.5-91
1.3 The preparation of product models of reels and dies shall comply with the requirements of JB/T5824.1-91 "Classification and Code of Special Equipment for Wires and Cables
Part 1 General Provisions".
Classification and Code
The classification and code of reels shall comply with the provisions of Table 1. 2.1
The classification and code of dies shall comply with the provisions of Table 2. 2.2
Table 1 Plate
Carbide
Approved by the Ministry of Machinery and Electronics Industry on October 17, 1991
For winding wire
For cable delivery
Metal wire drawing die
Non-ferrous metal rod
Large shaft hole
Small shaft hole
Cylindrical
Conical
Non-metal
1992—10-01Implementation
JB/15824.5||t t||Continued Table 2
Non-ferrous metal bars
Square and rectangular steels
Square and rectangular non-ferrous
Hexagonal steels
Hard alloy
Hexagonal non-ferrous
Metal materials
Non-ferrous metals
Non-ferrous metal wiresbzxZ.net
Natural diamond
Non-ferrous metal wires
Artificial diamond
Additional notes:
This standard was proposed and managed by the Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Shanghai Cable Research Institute and other units. The main drafters of this standard are Ou Xuecheng and Wang Yuhui. 120
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 2353.4-1992 Compatibility test method for filter element for magnetic slurry filtration
- GB 12987-1997 Concrete circular hole plates for farm houses
- GB/T 5169.17-2002 Fire hazard tests for electrical and electronic products Part 17: 500W flame test method
- GB/T 15442.2-1995 Classification and test methods of fire retardant performance of decorative fire retardant coatings Large panel fuel method
- GB/T 5009.52-2003 Analytical methods for hygienic standards of fermented bean products
- GB 3811-1983 Crane design specification
- GB/T 4958.13-1988 Measurement methods for equipment used in terrestrial radio-relay systems Part 3: Measurements on emulation systems Section 5: Measurements on mutual interference
- GB/T 14745-1993 Packaging-Cushioning materials-Test method for creep properties
- GB 19337-2003 Avermectin emulsifiable concentrate
- QB/T 2186-1995 Determination of nitrogen content in hydrolyzed protein solution by ammonia sensitive electrode method
- JB/T 9996-1999 55° tapered pipe thread tap
- GB/T 17141-1997 Soil quality - Determination of lead and cadmium - Graphite furnace atomic absorption spectrophotometry
- HG/T 3134-1998 Technical requirements for fluidized bed sodium ion exchange water treatment equipment
- QB/T 1049-2004 Folding endurance tester for paper and paperboard
- GB/T 6807-2001 Specifications for phosphating treatment of iron and steel parts before painting
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com