JB/T 8090.1-1999 Woodworking saw blade roller press parameters

JB/T 8090.1-1999 This standard is a revision of JB 3098-82 "Parameters of saw blade roller presses". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of woodworking saw blade roller presses. This standard is applicable to saw blade roller presses for trimming the tension of woodworking band saw blades. This standard was first issued on February 12, 1982. JB/T 8090.1-1999 Parameters of woodworking saw blade roller presses JB/T8090.1-1999 Standard download decompression password: www.bzxz.net

ECS 79.120.10
Machinery Industry Standard of the People's Republic of China
JE/T8090.18090.2-1999
Woodworking Saw Blade Roller
1999-05-14 Issued
National Machinery Industry Bureau
2000-01-01 Implementation
The above standard is a revision of JB3098-82≤Saw Blade Roller, and only the relevant provisions were edited and modified during the revision. The technical content is not clear.
This standard replaces JB3098-82. This standard is proposed by the National Technical Committee for Standardization of Woodworking Machine Tools and Knives. The main body of this standard is Shenyang Woodworking Machine Tool Factory. The drafting unit of this standard is Shenyang Woodworking Machine Tool Factory. This standard was first issued on May 12, 1982.
Machinery Industry Standard of the People's Republic of China
Woodworking Saw Blade Press
This standard specifies the performance of local saw blade presses. Parameters
This standard applies to the saw blade press machine suitable for the whole band saw blade [the following simplified machine tool number
The type of the machine tool is shown in Figure 1 (without limiting its body structure). The number of parts shall comply with the provisions of Table 1. Figure
Number name
Maximum width of the press B
Maximum thickness of the strip 5
According to the version of the strip bzxZ.net
Approved by the National Machinery Industry Bureau on May 14, 1999 2
JB/T8090.1-1999
Generation B3098-92
Implementation on January 11, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.