
GB/T 3752.1-1983 Compression-type right-angle pipe joints
time:
2024-08-10 20:03:39
- GB/T 3752.1-1983
- Abolished
Standard ID:
GB/T 3752.1-1983
Standard Name:
Compression-type right-angle pipe joints
Chinese Name:
卡套式组合直角管接头
Standard category:
National Standard (GB)
-
Date of Release:
1983-06-17 -
Date of Implementation:
1984-04-01 -
Date of Expiration:
2008-11-01
Standard ICS number:
21.060.60;China Standard Classification Number:
Machinery>>General Parts>>J15 Pipe Accessories
alternative situation:
Replaced JB 1958-1977; replaced by GB/T 3752-2008
Release date:
1983-06-17Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
National Technical Committee for Standardization of Pipe AccessoriesPublishing Department:
China Machinery Industry FederationCompetent Authority:
China Machinery Industry Federation

Skip to download
Summary:
This standard specifies the ferrule type combined right angle pipe joints, which are suitable for pipeline systems of oil, gas and general corrosive media. GB/T 3752.1-1983 ferrule type combined right angle pipe joints GB/T3752.1-1983 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Compression-type combined right-angle pipe joint
Adjustable elbow-Assembly
UDC621.643.4
GB3T52.1—83
This standard specifies the compression-type combined right-angle pipe joint, which is suitable for piping systems of oil, gas and general corrosive media. S
GB3750-83
GB 3752.2-83bZxz.net
G3764—83
Marking example:
Nominal pressure J level, pipe outer diameter D. is 14mm, lower sleeve type combined right angle pipe joint: pipe joint J14GB 3752.1—83
National Bureau of Standards 1983-06-17 Issued
1984-04-01 Implementation
Nominal pressure
Pipe outer diameter
GB3752.183
Specific gravity is 7.85kg/dm3.
Note: weight is calculated value,
Technical conditions are in accordance with GB3765—83. Additional Notes:
Wrench Size
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. er
(kg/100 pieces)
This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery!, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the Seventh and Eighth Institutes of the Aviation Department. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Tu Muqin. From the date of implementation of this standard, the original ministry standard JB195877 "Combined Right Angle Pipe Joints with Compression Sleeves" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Compression-type combined right-angle pipe joint
Adjustable elbow-Assembly
UDC621.643.4
GB3T52.1—83
This standard specifies the compression-type combined right-angle pipe joint, which is suitable for piping systems of oil, gas and general corrosive media. S
GB3750-83
GB 3752.2-83bZxz.net
G3764—83
Marking example:
Nominal pressure J level, pipe outer diameter D. is 14mm, lower sleeve type combined right angle pipe joint: pipe joint J14GB 3752.1—83
National Bureau of Standards 1983-06-17 Issued
1984-04-01 Implementation
Nominal pressure
Pipe outer diameter
GB3752.183
Specific gravity is 7.85kg/dm3.
Note: weight is calculated value,
Technical conditions are in accordance with GB3765—83. Additional Notes:
Wrench Size
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. er
(kg/100 pieces)
This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery!, Chongqing Heavy Automobile Research Institute, Dalian Combined Machine Tool Research Institute, Zhejiang Haiyan County Pipe Fittings Factory, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the Seventh and Eighth Institutes of the Aviation Department. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Tu Muqin. From the date of implementation of this standard, the original ministry standard JB195877 "Combined Right Angle Pipe Joints with Compression Sleeves" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB 20007.3-2004 Oral liquid bottle filling linkage line tunnel type sterilization dryer
- GB/T 5009.105-2003 Determination of chlorothalonil residues in cucumbers
- JB/T 9835.1-1999 Technical requirements for agricultural gear pumps
- GB/T 3108-1999 Impressed current cathodic protection system for hulls
- JB/T 8550-1997 Crawler surface drilling vehicle
- GB/T 9124-2000 Technical requirements for steel pipe flanges
- GB/T 14985-1994 General provisions for dimensions, shape, surface quality, test methods and inspection rules of expansion alloys
- GB 17646-1998 Safety requirements for small wind turbines
- SJ 20266-1993 Verification procedures for TEK1411 video signal generator and TSG12 convergence pattern signal generator unit
- JB/T 9160.11-1999 Single-spindle turret automatic lathe auxiliary tool tapping tool bar dimensions
- HG 2368-1992 Specifications for Shore A-type rubber pocket hardness tester
- SY/T 10035-2000 Specification for towing and positioning of drilling platforms
- GB/T 5653-1985 Technical requirements for flared pipe joints
- JB/T 8006.4-1999 Machine tool fixture parts and components movable handle clamping screws
- GB/T 15826.9-1995 Machining allowances and tolerances for hammer-type steel free forgings - Black forgings
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com