GB/T 15516-1995 空气质量 甲醛的测定 乙酰丙酮分光光度法
time:
2024-08-08 19:18:38
- GB/T 15516-1995
- in force
Standard ID:
GB/T 15516-1995
Standard Name:
空气质量 甲醛的测定 乙酰丙酮分光光度法
Chinese Name:
空气质量 甲醛的测定 乙酰丙酮分光光度法
Standard category:
National Standard (GB)
-
Date of Release:
1995-03-15 -
Date of Implementation:
1995-08-01
Standard ICS number:
环保、保健与安全>>空气质量>>13.040.01空气质量综合China Standard Classification Number:
环境保护>>环境保护采样、分析测试方法>>Z15大气环境有毒物质分析方法
Release date:
1995-01-19Review date:
2004-10-14Drafter:
丁荔、郭秋云Drafting Organization:
上海市环境监测中心Focal point Organization:
国家环境保护总局Proposing Organization:
国家环境保护局规划标准处Publishing Department:
国家环境保护局 国家技术监督局Competent Authority:
国家环境保护总局
Description (Translated English) / downloadSkip to download
Summary:
本标准规定了测定工业废气和环境空气中甲醛的乙酰丙酮分光光度法。本方法适用于树脂制造、涂料、人造纤维、塑料、橡胶、染料、制药、油漆、制革等行业的排放废气，以及作医药消毒、防腐、熏蒸时产生的甲醛蒸气测定。 GB/T 15516-1995 空气质量 甲醛的测定 乙酰丙酮分光光度法 GB/T15516-1995 标准下载解压密码：www.bzxz.net
- Recommended standards
- GB 13004-1999 Periodic inspection and evaluation of seamless steel gas cylinders
- JB/T 3168.1-1999 Technical requirements for spray welding alloy powder
- GB 4404.4-1999 Grain Crop Seeds Buckwheat
- JB/T 5440-1991 Ultrasonic flaw detection of compressor forged steel parts
- JB/T 6279.1-1992 Basic parameters of disc harrow
- GB 3096-1993 Environmental noise standards in urban areas
- GB 15581-1995 Caustic soda and polyvinyl chloride industrial water pollutant discharge standards
- JB/T 9731.2-1999 Diesel engine fuel injection pump camshaft shaft end dimensions
- SY/T 5524-1992 Petroleum seismic exploration vehicle-mounted drilling rig
- SJ 1.11-1987 Provision and requirements for preparation and revision of technical standards for electronic industry-Requirements for contents of submitted reports concerning draft standards
- GB/T 9104.9-1988 Determination of the composition of the test method for industrial stearic acid
- GB/T 5009.85-2003 Determination of riboflavin in foods
- JB/T 9740.3-1999 Technical requirements for low speed wind turbines
- JB/T 8706-1998 Technical requirements for 50~200MW steam turbine generator rotor forgings without center hole
- SN/T 0987.6-2013 Rules for inspection of IBCs for export dangerous goods—Part6:Flexible IBCs
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com