GB 18068-2000 Standard for sanitary protection distances in cement plants

This standard specifies the required sanitary protection distance between cement plants and residential areas. This standard applies to new cement plants located in plains and hilly areas and the expansion and reconstruction of existing cement plants. Existing cement plants can refer to it for implementation. The sanitary protection distance in areas with complex terrain conditions should be determined jointly by the competent department of the construction unit and the health and environmental protection authorities of the municipality or autonomous region where the construction project is located based on the atmospheric environment quality evaluation report. GB 18068-2000 Cement Plant Sanitary Protection Distance Standard GB18068-2000 Standard Download Decompression Password: www.bzxz.net

GB180682000
All technical contents of this standard are mandatory. The standard for the distance between industrial enterprises and the prevention of pollution is a comprehensive standard involving construction planning, general layout of industrial construction, environmental sanitation and sanitary engineering. Its purpose is to ensure that the pollutants generated by national key industrial enterprises after the project is put into production will not affect the health of people in residential areas. This standard aims at the characteristics of various harmful factors, finds the occurrence, diffusion, dilution, attenuation and degradation characteristics of harmful factors, and then, based on the best practical technology principle, according to the governance indicators and maintenance management measures that can be achieved at my country's current economic level, determines the allowable emission intensity of industrial enterprises, and finally selects the appropriate atmospheric diffusion model and corresponding parameters to determine the required sanitary protection distance. This standard shall be implemented from January 1, 2001. This standard is proposed by the Ministry of Health of the People's Republic of China. The responsible drafting unit of this standard is: Institute of Environmental Health and Sanitary Engineering, Chinese Academy of Preventive Medicine. The main drafters of this standard are: Hu Gengxin, Shao Qiang, Lu Ruzhou and Hong Yanfeng. This standard is entrusted by the Ministry of Health to the Institute of Environmental Health Monitoring, Chinese Academy of Preventive Medicine for interpretation. 228
1 Scope
National Standard of the People's Republic of China
Health protection zone standard for cement plant
Health protection zone standard for cement plant This standard specifies the required health protection distance between cement plant and residential area. GB180682000
This standard is applicable to new cement plants located in plain and hilly areas and the expansion and reconstruction projects of existing cement plants. Existing cement plants shall be implemented as a reference. The health protection distance under complex terrain conditions shall be determined jointly by the competent department of the construction unit and the health and environmental protection departments of the province, municipality and autonomous region where the construction project is located based on the atmospheric environment quality evaluation report. Definition
This standard adopts the following definitions.
2. 1 Health protection zone The minimum distance from the boundary of the department (workshop or section) where harmful factors are generated to the boundary of the residential area. 3 Contents of the standard
3.1 The health protection distance of cement plants shall be determined according to the average wind speed in the area in the past five years as shown in Table 1. Table 1
Production scale
Annual cement production, x1 Shanghai t
Average wind speed in the region in the past five years, m/s
3.2 This standard also stipulates that the location of cement plants and residential areas should take into account the influence of factors such as wind direction frequency and terrain to minimize the pollution to the atmospheric environment of residential areas. bzxZ.net
Approved by the State Administration of Quality and Technical Supervision on April 10, 2000 and implemented on January 1, 2001
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.