JB/T 2001.5-1999 Types and dimensions of copper gaskets for water system flanges
time:
2024-08-14 17:15:01
- JB/T 2001.5-1999
- in force
Standard ID:
JB/T 2001.5-1999
Standard Name:
Types and dimensions of copper gaskets for water system flanges
Chinese Name:
水系统 法兰铜垫 型式与尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2005-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical Committee
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2001.5-1999 JB/T 2001.5-1999 Types and dimensions of copper gaskets for flanges in water systems JB/T2001.5-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system flange copper washer
Type and size
Waller system-Plangc copperwasherType and size
This standard specifies the types and sizes of copper plates. H/T2001.5-1999
12G0—34
This standard applies to [200L6-20012—1999 Attachment 3 JDT200114-20018-189 Report "Use in the Form of
Cited Standards
The following standards contain texts, and when they are used in this standard and become the standard version of this standard, the size shown is valid. The standard will be revised. The use of the standards should be considered as follows: The latest version of the listed standards may be JD.T2001.6-2001.12.--1959
Connecting flange
JB.T2001.14.-2001.18.-1999
3 Types and dimensions
3. [The type and size of the stopper of the gasket and the starter shall comply with the provisions of Figure and Table 1. k
3.2 Gasket Finance Department: T3.
Approved by the State Machinery Industry Bureau on June 28, 1999
Implementation on January 1, 2000
TH:1 5
JHI IS:
JB:T2O15.3
JB.T 2401.5 4
2TVT 2001 5.5
1:20015.6
JB:T 2COI 5.:
JR:T 2COI.SSbzxz.net
: 2m :5.9
11:1 2:X:1.3.11
JB/1 7x1.5.12
JB 2X1513
JB/T20G].5.14
JE 20C :.15
D/T 20x:1.5.15
O3:T 2301.5.17
JB 201.5.18
JB-T 2(C1.5.12
JB/T 2(C1.5.21
JB/T 20X.1.5.22
15-1 2x: 1 5.11
1M1Z1:.74
JB/T 2001476
JB2K :27
J3/7 2001.5.28
J2T 2001.$.29
Ji1 2n01..31
4 Marking example
JB/T2001.5—199↓
d. is 13.5 mm, d9.5 mm, 2 mm pad [3.5.9.>-2JB/T2001999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
State Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system flange copper washer
Type and size
Waller system-Plangc copperwasherType and size
This standard specifies the types and sizes of copper plates. H/T2001.5-1999
12G0—34
This standard applies to [200L6-20012—1999 Attachment 3 JDT200114-20018-189 Report "Use in the Form of
Cited Standards
The following standards contain texts, and when they are used in this standard and become the standard version of this standard, the size shown is valid. The standard will be revised. The use of the standards should be considered as follows: The latest version of the listed standards may be JD.T2001.6-2001.12.--1959
Connecting flange
JB.T2001.14.-2001.18.-1999
3 Types and dimensions
3. [The type and size of the stopper of the gasket and the starter shall comply with the provisions of Figure and Table 1. k
3.2 Gasket Finance Department: T3.
Approved by the State Machinery Industry Bureau on June 28, 1999
Implementation on January 1, 2000
TH:1 5
JHI IS:
JB:T2O15.3
JB.T 2401.5 4
2TVT 2001 5.5
1:20015.6
JB:T 2COI 5.:
JR:T 2COI.SSbzxz.net
: 2m :5.9
11:1 2:X:1.3.11
JB/1 7x1.5.12
JB 2X1513
JB/T20G].5.14
JE 20C :.15
D/T 20x:1.5.15
O3:T 2301.5.17
JB 201.5.18
JB-T 2(C1.5.12
JB/T 2(C1.5.21
JB/T 20X.1.5.22
15-1 2x: 1 5.11
1M1Z1:.74
JB/T 2001476
JB2K :27
J3/7 2001.5.28
J2T 2001.$.29
Ji1 2n01..31
4 Marking example
JB/T2001.5—199↓
d. is 13.5 mm, d9.5 mm, 2 mm pad [3.5.9.>-2JB/T2001999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 5686.5-1988 Chemical analysis methods for manganese silicon alloys - Determination of carbon content by infrared absorption method
- GB/T 3125-1994 White copper wire
- GB/T 15495-1995 电动轮椅车气候试验方法
- HG 20559.4-1993 Pipeline instrument flow chart pipeline numbering and marking
- JB/T 1308.14-1999 PN250a Double-ended stud types, dimensions and technical requirements
- GB/T 13911-1992 Expression methods for metallic coating and chemical treatment
- CB/Z 54-1981 Electrolytic zinc plating
- SB/T 10619-2011 Requirements for retailers private brand development and operation
- GB/T 14810-1993 110KV and above AC high voltage load switch
- GB/T 19434.3-2004 Safety specification for inspection of wooden intermediate bulk containers for dangerous goods Performance inspection
- JB/T 9902.1-1999 Accuracy test of connecting rod bearing boring machine
- GB/T 13407-1992 Terminology of submersibles and underwater devices
- GB/T 15589-1995 Classification of microscopic coal and rock types
- GB/T 5383-1994 Test method for minimum steady speed of motorcycles and mopeds
- QB/T 2463.2-1999 Silica method for rigid polyvinyl chloride low foaming board
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com