JB/T 5097-1991 Internal combustion engine spin-on oil filter series dimensions

This standard specifies the main characteristic dimensions of internal combustion engine spin-on oil filters. This standard applies to paper filter spin-on oil filters for small and medium power internal combustion engines. JB/T 5097-1991 Internal combustion engine spin-on oil filter series dimensions JB/T5097-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T5097-91
Series Dimensions of Spin-on Oil Filters for Internal Combustion Engines Published on 1991-07-01
Published by the Ministry of Machinery and Electronics Industry of the People's Republic of China
Implemented on 1992-07-01
Mechanical Industry Standard of the People's Republic of China
Series Dimensions of Spin-on Oil Filters for Internal Combustion Engines 1 Subject Content and Scope of Application
This standard specifies the main characteristic dimensions of spin-on oil filters for internal combustion engines. JB/T5097-31
This standard applies to spin-on oil filters with paper filter elements for small and medium-power internal combustion engines (hereinafter referred to as spin-on filters). 2 Main Dimensions of Spin-on Filters
2.1 See Figure 1 for the main dimensions of spin-on filters.
Dv-Filter element true diameter:
H.-Filter element length:
D-Assembly diameter:
HAssembly length:
2.2Spin-on filter element series dimension values ​​shall comply with the provisions of Table 1. Approved by the Ministry of Machinery and Electronics Industry on July 1, 19916Filter paper fold width:
TII--Connection thread:
d-Inner diameter of sealing diagram:
4,-Outer diameter of sealing ring
Implemented on July 1, 1992
Filter element diameter
Filter paper fold width
Spin-on filter connection thread TH shall comply with the provisions of Table 2. Assembly diameter0
JB/T509791
Spin-on filter assembly diameter D and length H shall comply with the provisions of Table 3. 3
Assembly diameter D
Indigo filter seal ring inner diameter 4, and outer diameter 4, should comply with the provisions of Table 4. 2.5
Inner diameter × outer diameter
454×64
e56xp66
#62×072
493×@105
M30×2
Additional instructions:wwW.bzxz.Net
JB/T5097-91
This standard was proposed and managed by the Shanghai Internal Combustion Engine Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by the Shanghai Internal Combustion Engine Research Institute of the Ministry of Machinery and Electronics Industry. The main drafters of this standard are Su Qinghua and Chu Qi. 3
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.