JB/T 4323.1-1999 Water-based metal cleaning agent

JB/T 4323.1-1999 This standard is a revision of JB 4323-86 "Water-based Metal Cleaning Agent". During the revision, the cleaning methods and oil used have changed. This standard specifies the classification, technical requirements, packaging, labeling, transportation and storage of water-based metal cleaning agents. This standard applies to water-based metal cleaning agents that are mainly composed of surfactants and various additives for cleaning oily metal materials and parts. This standard was first published on November 12, 1986. JB/T 4323.1-1999 Water-based metal cleaning agent JB/T4323.1-1999 Standard download and decompression password: www.bzxz.net

ICS 25.060.,99
Mechanical Industry Standard of the People's Republic of China
JB/T4323.1-1999
Water-based metal cleaning agent
Water-basedmetalcleanser
Released on 1999-05-20
National Machinery Industry Bureau
Released
Implemented on 2000-01-01
JB/T4323.1-1999
Foreword
Revision of "Water-based Metal Cleaning Agent". During the revision, in addition to editorial modifications to the original standard and the correction of some typographical errors in JB432386
, its main technical content has also been changed: 1. The original 2.3 "Suitable for mechanical cleaning" has been changed to "Suitable for ordinary mechanical cleaning under normal pressure." 2. The original 3.2 "30 Machinery Oil" is changed to "N46HL Hydraulic Oil (oil used in ordinary machine tool industry). This standard will replace JB4323-86 from the date of implementation. This standard is proposed and centralized by Guangzhou Machine Tool Research Institute. This standard is responsible for Drafting units: Guangzhou Machine Tool Research Institute, Beijing Technical Exchange Station, Chaonan University. Main drafters of this standard: Li Maosheng, Tang Lianhua, Fan Shuqing, Liu Shilun 1Scope
Machinery Industry Standard of the People's Republic of China||tt| |Water-based metal cleaner
Water-based metal cleanser
JB/T4323.1—1999
Generation JB432386
This standard specifies the requirements for water-based metal cleaners Classification, technical requirements, packaging, marking, transportation and storage. This standard applies to water-based metal cleaning agents that are mainly composed of surfactants and various additives for cleaning oily metal materials and parts. 2 Reference standards ||tt ||The following standards contain provisions that, by reference in this standard, constitute provisions of this standard. The editions indicated are valid at the time of publication of this standard. All standards are subject to revision and parties using this standard should consider their use. Possibility of the latest version of the following standards. JB/T4323.2-1999 Water-based metal cleaning agent test method 3 classification
Water-based metal cleaning agents include filter, powder and paste products, which are divided into high-efficiency, Anti-rust type, low foam type and normal temperature type. 3.1 High-efficiency type
The product has excellent cleaning performance and does not corrode metal during the cleaning process. 3.2 Anti-rust type
The product does not corrode metal during the cleaning process. The residual liquid film has a temporary anti-rust effect on metal. It is divided into two categories according to its adaptability to metals:
Category 1: suitable for steel, cast iron and other ferrous metal alloys; Category 2: suitable for steel, aluminum, Copper and its alloys. 3.3 Low-foaming type
products have low-foaming properties and have temporary anti-rust effects on ferrous metals, and are suitable for normal mechanical cleaning under normal pressure. , divided into two categories according to their adaptability to oil stains: Category 1: suitable for cleaning light oil stains at room temperature: Category 2: suitable for cleaning heavy oil stains at room temperature. 4 Technical requirements
4.1 General requirements
4.1.1 The product should be harmless to the human body and have no strong irritating odor. 4.1.2 The product concentration should not exceed 5% (weight ratio). 4.1.3 The product shall be valid for no less than one year from the date of shipment under the specified conditions. . 4.2 The physical and chemical performance indicators and test methods are shown in Table 1. Approved by the National Machinery Industry Bureau on 2000-01-01 on 1999-05-20
Appearance
(15~35% )
Object
JB/T4323.1-1999
Table 1 Physical and chemical performance indicators and test methods
refers to
high-efficiency type
Liquid products
Powdered products
Paste products
PH value (15~35℃)
Cleaning ability: 45
Steel test piece 65℃ ±2℃
(requires temperature 30℃±2℃)
static immersion and strong washing for 3min each
rust resistance:
35℃±2℃|| tt||RH>95%
Single piece 24h
Stacked 4h
Cast iron 4h
Corrosion:
70 ℃±2℃
(normal overflow type
40℃±2℃)
45 steel
duralumin LY12
Brass H62
Oil washing rate
Artificial oil stain
%| |tt||(Gravity method)
Hydraulic oil
Residual oil amount
Artificial oil pollution
(fluorescence method )》
Hydraulic oil
HT200 cast iron
yellow steel H62
duralumin LY12
45 steel
outside
Observation
The biggest change
Outside
Heavy egg change
Outside
Weight change|| tt||Exterior
Weight change
Defoaming performance ( 30℃±2℃)wwW.bzxz.Net
Residual foam height mm after 10min
Stability in hard water: 20 artificial hard water
65℃±2% (temperature type 40℃±2℃) 1h water-insoluble matter%
High and low temperature stability: 60℃±2%
The room temperature returns to room temperature after 6h
18℃±3℃
The room temperature returns to room temperature after 1h| |tt||Liquid products
Powder and paste products
Liquid products
Paste products
Source washability: 65%*2℃ (normal temperature 30 ℃±2℃) 2
Actual measurement
Actual measurement
Level 0
≤±2
Level 0
w±2|| tt | , no precipitation
uniform, loose, no hard lumps
standard
normal temperature type
first class
uniform, no hard lumps, no obvious High score phenomenon 7.0~11.0
Qualified
Qualified
Qualified
Qualified
Level 1| |tt||≤±2
Level 0
≤±2
Qualified
Level 0
≤±2
Level 0
≤±2
Level 1
≤±2
Qualified
Qualified|| tt||Level 1
≤±2
Level 0
≤±2
No shapes, no precipitates|| tt||≤0.1
Class II
>90
1 Level
≤±2
Level 0
≤±2
Actual measurement
Actual measurement
Actual measurement
Actual measurement|| tt||Uniform, no stratification, no precipitates and cases are uniform, no stratification, no precipitates
No visible cleaning agent residue
1 Cleaning The ability of fruit is measured by gravimetric method and fluorescence method. If any one of the methods passes the test, it is qualified. 2 For rust resistance and corrosion resistance assessment (grade) standards, see JB/T4323.2. 2
Test method
According to the relevant provisions of JB/T4323.2-
1999|| tt||Chapter 4
Chapter 5
Chapter 6
Year 7
Chapter 8
Chapter 9||tt| |Chapter 10
Chapter
Chapter 12
Chapter 13
Chapter 14
5 Packaging, marking, transportation and storage|| tt||JB/T4323.11999
5.1 Products must be packed in packaging containers that do not affect their quality and must be solid and suitable for transportation and storage. 5.2. The surface of the packaging container should be marked with the product name, model, manufacturer name, product batch number, production date, ex-factory date, gross weight, net weight, and transportation and storage conditions.
Products leaving the factory should be accompanied by a product certificate.
Must be shipped according to transportation conditions and throwing is prohibited to protect packaging and products from damage. 5.3
Storage products according to purchase and storage conditions to prevent damage to products and packaging. 5.4
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.