
GB/T 5235-1985 Chemical composition and product shape of processed nickel and nickel alloys
time:
2024-08-04 20:00:27
- GB/T 5235-1985
- Abolished
Standard ID:
GB/T 5235-1985
Standard Name:
Chemical composition and product shape of processed nickel and nickel alloys
Chinese Name:
加工镍及镍合金 化学成分和产品形状
Standard category:
National Standard (GB)
-
Date of Release:
1985-07-22 -
Date of Implementation:
1986-07-01 -
Date of Expiration:
2007-11-01
Standard ICS number:
Metallurgy>>Non-ferrous metals>>77.120.40 Nickel, chromium and their alloysChina Standard Classification Number:
Metallurgy>>Nonferrous Metals and Their Alloy Products>>H62 Heavy Metals and Their Alloys
alternative situation:
Replaced YB 144-1971 replaced by GB/T 5235-2007
Review date:
2004-10-14Drafting Organization:
Shenyang Nonferrous Metal Processing PlantFocal point Organization:
National Technical Committee for Standardization of Nonferrous MetalsPublishing Department:
China Nonferrous Metals Industry AssociationCompetent Authority:
China Nonferrous Metals Industry Association

Skip to download
Summary:
GB/T 5235-1985 Chemical composition and product shape of processed nickel and nickel alloys GB/T5235-1985 standard download decompression password: www.bzxz.net

Some standard content:
Scope of application
National Standard of the People's Republic of China
Wrought nickelsand nickel alloys -Chemical composition and forms ofwrought products
This standard specifies the chemical composition of nickel and nickel alloys and lists the commonly used product forms. 2 Chemical composition
UDC 669.245
:54.01/.02
GB 5235 --85
2.1 The chemical composition of nickel and nickel alloys shall comply with the provisions of Table 1. If the purchaser requires the restriction of elements not specified in Table 1, it can be agreed upon by both parties.
2.2 Bismuth, antimony and arsenic may not be analyzed, but the supplier must ensure that the limit value is not greater than 2.3 After negotiation between the supply and demand parties, DN nickel-silicon-magnesium alloy with Ni+Co+Mg+C not less than 99.65% can be supplied. 2.4 For alloys used as thermocouples, in order to ensure electrical performance, elements with maximum and minimum values are allowed to slightly exceed the provisions in Table 1.
2.5 The copper content of non-electrical N6 nickel can reach 0.10%. 2.6 The rounding of numbers shall be carried out in accordance with the provisions of the Appendix (Rounding of Numbers) of GB1.1-81 "General Provisions for the Preparation of Standards for Standardization I Guidelines".
Processed Product Shapes
Add [The commonly used processed product shapes of nickel and nickel alloys are listed in Table 2. Issued by the National Bureau of Standards in 1985-0722
Implemented in 1986-0701
GB5235
2000200bZxz.net
200000002000
s90010*0
700020
20002000
20002000
20002000
200.02000||t t||100\0|100*01000
1000900.0
100°0
100100100| |tt||10000000000000
200..100.0.100.0
s0os100
onoN!
nickel manganese people all
negative nickel
-—85
GB5235
1o1k00
20zo0so0020000a00ao0.dcoo0.oo00f
tooooocaooomooo||tt| |1o-0so0
qootoo.ogooom
10:070'0
ooooooigooo
too.dtoo.ccotooooo.coo.atoogoo.moooooo
120°00°
z0 02o02o000.20000.ca002200o
20o0oa0o0a020000m
970900
20°0-V
61O!SN
Thermoelectricity
La Lezhou Nickel United
NCu40-2-1
NCu2.8·2.51.5
GB5235--85
Table 2 Product Shape
) Long small commonly produced products, dense means no product or not commonly produced Jiang
Additional Note:
GB5235—85
This standard is called the standard and can be proposed by the General Company of Nonferrous Metals Industry. This standard is drafted by Liuyang Nonferrous Metals. 、 "Guoxiang, Xishilong, "Fuqing, Zhang is very provincial. This standard should be adjusted from the date of implementation of this standard: the original Ministry of Metallurgical Industry standard YB144-71 "Nickel and Nickel Alloy Additives Chemical Composition" Price Safety, 26
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Wrought nickelsand nickel alloys -Chemical composition and forms ofwrought products
This standard specifies the chemical composition of nickel and nickel alloys and lists the commonly used product forms. 2 Chemical composition
UDC 669.245
:54.01/.02
GB 5235 --85
2.1 The chemical composition of nickel and nickel alloys shall comply with the provisions of Table 1. If the purchaser requires the restriction of elements not specified in Table 1, it can be agreed upon by both parties.
2.2 Bismuth, antimony and arsenic may not be analyzed, but the supplier must ensure that the limit value is not greater than 2.3 After negotiation between the supply and demand parties, DN nickel-silicon-magnesium alloy with Ni+Co+Mg+C not less than 99.65% can be supplied. 2.4 For alloys used as thermocouples, in order to ensure electrical performance, elements with maximum and minimum values are allowed to slightly exceed the provisions in Table 1.
2.5 The copper content of non-electrical N6 nickel can reach 0.10%. 2.6 The rounding of numbers shall be carried out in accordance with the provisions of the Appendix (Rounding of Numbers) of GB1.1-81 "General Provisions for the Preparation of Standards for Standardization I Guidelines".
Processed Product Shapes
Add [The commonly used processed product shapes of nickel and nickel alloys are listed in Table 2. Issued by the National Bureau of Standards in 1985-0722
Implemented in 1986-0701
GB5235
2000200bZxz.net
200000002000
s90010*0
700020
20002000
20002000
20002000
200.02000||t t||100\0|100*01000
1000900.0
100°0
100100100| |tt||10000000000000
200..100.0.100.0
s0os100
onoN!
nickel manganese people all
negative nickel
-—85
GB5235
1o1k00
20zo0so0020000a00ao0.dcoo0.oo00f
tooooocaooomooo||tt| |1o-0so0
qootoo.ogooom
10:070'0
ooooooigooo
too.dtoo.ccotooooo.coo.atoogoo.moooooo
120°00°
z0 02o02o000.20000.ca002200o
20o0oa0o0a020000m
970900
20°0-V
61O!SN
Thermoelectricity
La Lezhou Nickel United
NCu40-2-1
NCu2.8·2.51.5
GB5235--85
Table 2 Product Shape
) Long small commonly produced products, dense means no product or not commonly produced Jiang
Additional Note:
GB5235—85
This standard is called the standard and can be proposed by the General Company of Nonferrous Metals Industry. This standard is drafted by Liuyang Nonferrous Metals. 、 "Guoxiang, Xishilong, "Fuqing, Zhang is very provincial. This standard should be adjusted from the date of implementation of this standard: the original Ministry of Metallurgical Industry standard YB144-71 "Nickel and Nickel Alloy Additives Chemical Composition" Price Safety, 26
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SJ 3181-1989 Graphic base of electronic elements-IC Graphic
- HG 21546.1-1993 Types and technical requirements of support wheels and retaining wheels for rotary drums
- GB/T 17693.6-1999 Transformation guidelines of geographical names from foreign languages into Chinese--Arabic
- HG/T 2743.4-1996 Specification for the preparation of product standards for pesticide composite water suspension concentrates
- QX/T 497-2019 Specifications for climatic feasibility demonstration—Application of numerical simulation and reanalysis data
- JB/T 5868-2004 General technical requirements for printed winding DC servo motors
- SJ 20052-1992 Detail specification for switch, waveguide, electromechanical operated,1P2T, fail-safe,Model KB-84
- SJ 20732-1999 General specification for mobile communication RF power amplifier
- JB/T 9741-1999 Technical requirements for valve tappets of internal combustion engines
- HG/T 2409-1992 Determination of isocyanate content in polyurethane prepolymers
- JB/T 8010.14-1999 Machine tool fixture parts and components hinge clamps
- GB 50255-1996 Specification for construction and acceptance of power converter equipment for electrical installation engineering
- GB/T 39443-2020 Means and interface specifications for public credit information exchange
- JB/T 8056-1996 Slag granulator
- GB/T 2688-1981 Technical requirements for sliding bearings - powder metallurgy bearings
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com