GB 5296.6-2004 Instructions for use of consumer products Part 6: Furniture

This part of GB5296 specifies the basic requirements, methods and contents to be included in the preparation of instructions for use of furniture. This part is applicable to the preparation of instructions for use of all types of furniture. GB 5296.6-2004 Instructions for use of consumer products Part 6: Furniture GB5296.6-2004 Standard download decompression password: www.bzxz.net

GB52 Instructions for use of consumer products is divided into the following parts: GB>295.1—195% General principles for instructions for use of consumer products
GB 329, 2—1999
Instructions for use of consumer products
Instructions for use of household and similar electrical appliancesInstructions for use of consumer productsGeneral labeling of cosmeticsGB5296.31855
Instructions for use of consumer products
Instructions for use of cosmetics and clothing
GB 526. 4—1998
Instructions for use of consumer products
GB 5296.51996
Instructions for use of toys
G33290.6—2004 Instructions for use of consumer products Part 6: Household appliances 5296.6—2004bzxZ.net
This part is Part 6 of GB5296. This part is formulated in accordance with the requirements of GB5296.1:19979 General Principles of Product Instructions and the actual needs of the furniture industry. This standard shall be implemented from October 1, 2004. For products produced before January 1, 2004, the filtration period shall be one year. Appendix A of this part is a normative annex.
This part was proposed by China National Institute of Standardization. The relevant departments are: China National Institute of Standardization, National Standardization Center, China Consumers Association, Meidian Runji Home Furnishing Co., Ltd.
The main drafters of this part are: Ding Dongjiang, Wang Zheng, Yu Zhenglai, Liu Guoguo, Zuo Peilan, Gong Shihe, Jiang Jing, Wei Jie, Wu Jie. 1 Scope
Instructions for use of consumer products
Part 6: Furniture
(% of this part specifies the basic requirements, methods and contents of instructions for use of furniture. This part is applicable to the preparation of instructions for use of all kinds of furniture: 2 Normative references
GB 5296.6204
The following documents shall become the terms of this part after the expiration date. The following are the terms of this part after the expiration date. All subsequent amendments (excluding the contents of the warranty or the revisions) shall not affect this part. Instead, it is recommended that the research on whether the warranty of this part is valid shall be conducted in accordance with the provisions of this part. All referenced documents that do not meet the expiration date shall also use this part. GB29.1-1997 Instructions for use of consumer products 3.1 The furniture must be accompanied by instructions for use (name, brand name, instruction manual, etc.). 3.2 The name of the furniture must be authentic and comply with the provisions of the corresponding national standards or industry standards. For furniture whose names are not specified in the national standards or industry standards, the furniture industry shall promptly notify the furniture industry of the name. Common names of models. 3.3 When using the furniture, the purpose and applicable environmental conditions of the furniture must be clearly stated, and the structure, design, function, type, specifications and correct transportation, installation, use and maintenance methods and drawings must be provided according to the characteristics and needs of the furniture. For details, please see Appendix 43.4 The furniture must comply with the relevant national laws, regulations and standards on safety, health and environmental protection, and provide relevant requirements and indicators for the national requirements and indicators, and provide control indicators such as the actual content of hazardous substances or radioactivity in the materials and coatings of the furniture products.
3.5 The furniture must only use new materials and samples that contain radioactive substances or radioactive substances within the range allowed by relevant regulations. Improper use will not have any impact on consumers. The instructions for use must include precautions for use, protective measures, etc. 3. 6 When the code, type, model, etc. are changed, the relevant instructions for use must be updated in the specified order. The manufacturer must provide the user with the corresponding instructions for use. 3.7 The instruction manual can be compiled according to the specific furniture or according to the actual product classification. When classified by variety, the reference or technical notice part should be clearly identifiable. 3.8 The instruction manual supplied to consumers with the batch of furniture must indicate the order number and production date of the purchased furniture. 3.9 The instruction manual must indicate the publication date. 3.10 The instructions for use and the advertisements of the furniture shall not be sent or distributed by the company, and the contents of the advertisements, such as the information provided by the company, shall be effective. 3.11 When necessary, some notes must be clearly stated on the surface of the instruction manual: "Installation, usage month". Before tying the furniture, read the "Instructions for Use" section. 4. The location, method and form of the instructions for use should be based on the transportation and use. The instructions for use may be provided in one or more of the following ways: - in the form of a label installed on the furniture - in the form of an instruction manual or a label provided along with the furniture. GB5296.6—2004 5.1.1 Furniture supplied to domestic users must provide instructions for use in Chinese. If there are instructions for use in both Chinese and foreign languages, the Chinese title must be clear. In fact, the Chinese instructions must be placed before the foreign language. 5.1.2 Furniture for export must provide instructions for use in the official language of the sales area. When instructions for use in more than one language are required, the languages ​​must be clearly distinguishable. 5.1.3 The Chinese instructions for use must use the simplified Chinese characters officially announced and implemented by the State Council. Instructions for use in furniture sold abroad to Hong Kong, Macao and Taiwan: If required by the specification, full characters may be used. 5.1.4 When the instruction manual is translated into other languages, the translation must be accurate and must be completed by authoritative language experts and technical experts. 5.2 Expression 5.2.1 The content of the instruction manual should be presented in a way that is conducive to consumers' accurate and quick understanding, so that consumers can quickly complete the process. For example: The instruction manual for furniture installation must ensure that consumers can read and learn how to install the furniture in the shortest time. 5.2.2 For complex operating procedures, the instruction manual should use diagrams, charts and operation process diagrams to explain, so as to ensure smooth operation of users. 5.2.3 The instruction manual should focus on the problems that consumers may encounter during use. For example, the furniture is late at different times (seasons), different places, and different environmental conditions. The evaluation data provide advance notice and solutions. 5.2.4 If the content is too complicated or complex, clear and concise labels and characteristics should be used to help consumers quickly find the required content from the relevant provisions or labels. 5.2.5 The language expression should contain only one requirement, or at most contain two closely related requirements. To avoid confusion: use dynamics, do not use dynamics! Requirements should be decisive and forceful, not soft; use actions or words, do not throw in references. The expression should be straightforward, not tortuous. For example, Table 1:
The language should be strong
Make the action clear
5. 3 Items, changes, symbols, technical adjustments
: Do not touch the surface
Avoid: frequency
Put furniture in the middle
Use the frequency system
Do not use it quickly
Do not use it quickly
5.3.1 The figures and tables in the instruction manual should be printed together with the main text, and the figures and tables should be numbered in order. 5.3.2: When citing a table in the previous text, the table number and the page number where it appears should be cited. 5.3.3 The equal signs, chemical symbols, terms and measurement units in the instruction manual must comply with the latest national laws, regulations and relevant standards, and be consistent. Definitions must be given for terms that need to be explained. 5.3.4 Indicators, symbols and abbreviations should be noted when they are first modified in the instruction manual. 5.4 Table of Contents
When the instruction manual exceeds 1 page, each page should have a page number. When the instruction manual is longer, the table of contents should be written. 5.5 Printing
5.5.1 The printing material of the instruction manual should be durable and ensure the usability of the instruction manual during the life of the product. 5.5.2 The instruction manual for mass production should be printed in accordance with the standard GB 5296.6-2004
5.5.3 The text, symbols, tables, photos, etc. of the instruction manual must be clear and neat. For double-sided printing, the inner side shall not be visible due to the bend and other reasons.
5.6 Text
5.6, 1 The format of the book with instructions can be 3-fold or 1-fold. If necessary, other formats can be used. 5.6.2 Figures and tables can be extended in time, and can also be extended vertically if necessary. Large-format figures and tables with large quantities can be packaged separately. 5.6.3 Instructions for use The content of the document can be single page, folded or multi-page, and the single page should be bound. 5.7 Safety warning
The instructions for use must be printed with safety warnings on the inner side of the page. The relevant requirements shall be implemented in accordance with 685295.:-1097 9.1.9.2.9.3:
5.8. The contents should be arranged in the instructions for use, and Appendix A should be selected and reasonably arranged according to the characteristics and usage requirements of the specific family. 6 Evaluation of the quality of the instruction manual
It shall be implemented in accordance with the relevant requirements of Appendix A and Table A.2 of B5296.1-17. GR5296.6-2004
4.1 Overview
a) Name of the manufacturer;
(Normative appendix)
Main contents of the instruction manual
Main application and specification (including new application specifications when necessary);
Variety and specification;
Type and meaning;
Environmental conditions for use:
Impact on the environment:
) Safety
1) Implementation standard number
Date of production,
Structural features and principle of use
a) Overall structure and its principle of use, characteristics: structure, function and common use of main components or performance units! b)
e) The connection between each unit structure, the system working principle; d) The dynamic structure of the pumping device, its working principle, working characteristics. 4. 3 Technical characteristics
Main performance;
) Main parameters.
A.4 Dimensions
a) (Dimensions:
1) Installation dimensions,
A.5 Materials
) Names, grades, and origins of main auxiliary materials (such as basic materials, surface materials, installation materials, etc.), use date, etc.) Names and relevant information of dyes and finishing agents c! A.6 Installation and adjustment
Installation inspection parts and installation technical requirements;
Installation procedures, methods and precautions;
Adjustment procedures, methods and precautions:
) Acceptance test items, methods and criteria after installation and adjustment. A.7 Use
Use methods;
Notes on the use of products and standard measures A.5 Fault analysis and elimination
Fault phenomenon:
| ) Cause analysis;
) Elimination methods, it is recommended to use a table, see Table 4.1.
Troubleshooting
A.9 Maintenance
Maintenance method!
Regular maintenance methods;
Except for analysis
Long-term maintenance and maintenance.
Transportation. Storage
Removal and transportation precautions;
Deposit conditions and certificate of authenticity,
Unpacking and inspection
Opening inspection:
Installation plan.
Photos
Appearance diagram, installation diagram, city diagram: Structural diagram:
Schematic diagram , circuit diagram, transaction diagram
Various appendices: attachment list, special. 1. Item verification table, t!
Black film:
Temperature level
Manufacturer guarantees after-sales service items:
Other matters that need to be explained to the user:
Manufacturer name, communication information
Company name Your manufacturer's name Your import agent's postal address. Dealer name Your a
Pool address code, telephone, e-mail address and other non-disclosure methods
A 5296,6-2004
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.