INdex
GB standard
Standard category
Machinery Industry
It standard
Industry Standard
Chemical Industry It standard Petrochemical ZB Industry Light industry Railway industry Shipping industry Measurement standards

GB/T 3750.1-1983 Compression fittings

time: 2024-08-10 20:06:24
  • GB/T 3750.1-1983
  • Abolished

Basic Information

  • Standard ID:

    GB/T 3750.1-1983

  • Standard Name:

    Compression fittings

  • Chinese Name:

    卡套式铰接管接头

  • Standard category:

    National Standard (GB)

  • Date of Release:

    1983-06-17

  • Date of Implementation:

    1984-04-01

  • Date of Expiration:

    2008-11-01

standard classification number

  • Standard ICS number:

    21.060.60;

  • China Standard Classification Number:

    Machinery>>General Parts>>J15 Pipe Accessories

associated standards

Publication information

  • publishing house:

    China Standards Press

  • Publication date:

    1984-04-01

Other Information

  • Release date:

    1983-06-17

  • Review date:

    2004-10-14

  • Drafting Organization:

    Mechanical Industry Standardization Institute

  • Focal point Organization:

    National Technical Committee for Standardization of Pipe Accessories

  • Publishing Department:

    China Machinery Industry Federation

  • Competent Authority:

    China Machinery Industry Federation
Introduction to standardsDescription (Translated English) / download

Skip to download

Summary:

GB/T 3750.1-1983 Compression sleeve type hinged pipe joint GB/T3750.1-1983 standard download decompression password: www.bzxz.net
Standard contentStandard content

Some standard content:

National Standard of the People's Republic of China
Card sleeve type hinged pipe joint
Angle swlvel screw -AssemblyUDC621.643.4
GB 3750.1—83
This standard specifies the card sleeve type hinged pipe joint, which is suitable for pipeline systems of oil, gas and general corrosive media. GB 376983
GB 3764—83
Marking example.
Nominal pressure grade E, pipe outer diameter D, ferrule type hinged pipe joint of 14mm: Pipe joint E14GB3750.1—83
Promulgated by National Bureau of Standards on June 17, 1988
GB 3762--83
GB3750.3--83
GB3750.2-83
Implementation on April 1, 1984
Nominal pressure
Pipe outer diameterbzxZ.net
M27×2
M33×2
GB 3T50.1-83
Note: The weight is a calculated value, and the specific gravity is 7.85kg/dm3. The technical conditions shall be in accordance with the provisions of GB3765-83.
Additional Notes:
Wrench Size
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Institute of the Ministry of Machinery Industry. mm
(kg/100 pieces)
This standard was drafted by the Standardization Institute of the Ministry of Machinery Industry, and was drafted by Shenyang Heavy Machinery Plant, Chongqing Heavy Automobile Research Institute, Tianlian Combined Machine Tool Research Institute, Haiyan County Pipe Fittings Factory of Shijiang Province, Shanghai No. 1 Mechanical and Electrical Bureau Science and Technology Information Institute, and the 708th Institute of the Ministry of Aerospace. The main drafters of this standard are Hu Lusheng, Liu Dequan, Cheng Zhenshi, and Wang Muqin. From the date of implementation of this standard, the original ministry standard JB1953-77 "Cut-type articulated pipe joints" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
  • Recommended standards
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com