GB/T 15531-1995 Belt drive pulley center distance adjustment limit values
time:
2024-08-08 18:53:53
- GB/T 15531-1995
- Abolished
Standard ID:
GB/T 15531-1995
Standard Name:
Belt drive pulley center distance adjustment limit values
Chinese Name:
带传动 带轮 中心距调整极限值
Standard category:
National Standard (GB)
-
Date of Release:
1995-04-02 -
Date of Implementation:
1996-01-01 -
Date of Expiration:
2009-03-01
Standard ICS number:
Mechanical systems and general parts>>Flexible transmission and conveying>>21.220.10 Belt transmission and its partsChina Standard Classification Number:
Machinery>>General Parts>>J18 Chain Drive, Belt Drive and Key Connection
alternative situation:
Replaced by GB/T 15531-2008Procurement status:
＝ISO 155-89
Release date:
1995-04-02Review date:
2004-10-14Drafting Organization:
Standardization Institute of the Ministry of Machinery IndustryFocal point Organization:
China Machinery Industry FederationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the adjustment limit values of the center distance between two transmission pulleys. This standard applies to the determination of the adjustment limit values of the center distance between the following two transmission pulleys: a. Crowned pulleys for flat belts; b. Pulleys for single V-belts, multiple V-belts or combined V-belts; c. Pulleys for synchronous belts (trapezoidal teeth). GB/T 15531-1995 Adjustment limit values of the center distance between belt drive pulleys GB/T15531-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 16958-1997 Biaxially oriented polyester film for package
- GB/T 5126-2001 Eddy current flaw detection method for cold drawn thin wall tubes of aluminium and aluminium alloys
- GB/T 50328-2001 Specification for filing and organizing construction project documents
- GB/T 18570.12-2008 Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble ferrous ions
- JGJ 26-1995 Civil Building Energy Saving Design Standard
- JG/T 3028-1995 Residential kitchen exhaust duct
- JB/T 9931.2-1999 Horizontal bow sawing machine series
- HG/T 2173-1991 Silver-gel type microfilm negative
- HG 3284-2000 45% Malathion EC
- JB/T 9770-1999 Technical requirements for oil pump gears for internal combustion engines
- GB/T 5169.16-2002 Fire hazard tests for electrical and electronic products Part 16: 50W horizontal and vertical flame test methods
- GB/T 4051-1997 Red artificial corundum
- GB/T 8493-1987 Metallographic structure of cast carbon steel for general engineering
- JB/T 5287.2-1991 Disc type dairy separator
- JB/T 6383.3-1992 Cone seal welding tee pipe joint
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]