
JB/T 2001.64-1999 Filters for water system pumping stations (PN=20MPa)
time:
2024-08-12 07:57:07
- JB/T 2001.64-1999
- in force
Standard ID:
JB/T 2001.64-1999
Standard Name:
Filters for water system pumping stations (PN=20MPa)
Chinese Name:
水系统 泵站用过滤器(PN=20MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2067-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical CommitteePublishing Department:
Metallurgical Equipment Standardization Technical Committee

Skip to download
Summary:
JB/T 2001.64-1999 This standard is a revision of JB 2067-84 "Filters for hydraulic pump stations (Pg=200×100000Pa)". This standard specifies the type, size and technical requirements of filters. This standard is applicable to filters that play a coarse filtration role in high-pressure pipelines of water pump stations with a nominal pressure of 200MPa. This standard was first issued in 1984. JB/T 2001.64-1999 Filters for water system pump stations (PN=20MPa) JB/T2001.64-1999 Standard download decompression password: www.bzxz.net

Some standard content:
IC.s$ 23.110
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water SystembzxZ.net
Filter for Pump Station
WatersystemFilterfnrwateracumulatnr(PN=20 MPa ]
This standard specifies the type, size and technical requirements of the filter JB2001.64-9
This standard is used in high and small pipes of water stations with a nominal pressure of less than 20MPa. It plays a filtering role. 2. Type and size
The type and size of the filter shall be in accordance with the provisions of Figure 1 and the table. Frequency: 2-plastic mother: 2-0 shape and size: 4-effective network 1: 5-two: 6 certain body: one liquid network: one return connection: external one cost rate: 10 one sales-boudoir:
Approved by the State Machinery Industry Bureau on June 28, 1999 and implemented on January 1, 2000
JBT20U..64.2
Jm200:.64.3
JB/1 2001.64 4
JB:T 2301.64 :
JBT 2MUL
JB/T 20K1.64 3
.Ts/T 20:1.64.4
3 Technical requirements
1]4×14
14m×18
155×20
IB/T 2001.64—1999
3.1 Nominal pressure 20MPa, test pressure 30MPa, test pressure 30m, seal and shell shall not be filled or leaked 3.2 Before assembly, the original sand in the shell must be removed. 4 Marking example
Nominal diameter 65mm filter:
Filter DN63JE/T200[.64199g
4 × M34
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Standard of the Machinery Industry of the People's Republic of China
Water SystembzxZ.net
Filter for Pump Station
WatersystemFilterfnrwateracumulatnr(PN=20 MPa ]
This standard specifies the type, size and technical requirements of the filter JB2001.64-9
This standard is used in high and small pipes of water stations with a nominal pressure of less than 20MPa. It plays a filtering role. 2. Type and size
The type and size of the filter shall be in accordance with the provisions of Figure 1 and the table. Frequency: 2-plastic mother: 2-0 shape and size: 4-effective network 1: 5-two: 6 certain body: one liquid network: one return connection: external one cost rate: 10 one sales-boudoir:
Approved by the State Machinery Industry Bureau on June 28, 1999 and implemented on January 1, 2000
JBT20U..64.2
Jm200:.64.3
JB/1 2001.64 4
JB:T 2301.64 :
JBT 2MUL
JB/T 20K1.64 3
.Ts/T 20:1.64.4
3 Technical requirements
1]4×14
14m×18
155×20
IB/T 2001.64—1999
3.1 Nominal pressure 20MPa, test pressure 30MPa, test pressure 30m, seal and shell shall not be filled or leaked 3.2 Before assembly, the original sand in the shell must be removed. 4 Marking example
Nominal diameter 65mm filter:
Filter DN63JE/T200[.64199g
4 × M34
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 13623-1992 Safety and performance requirements for aluminum pressure cookers
- GB 6829-1995 General requirements for residual current operated protective devices
- GB/T 15157.7-2002 Printed board connectors for frequencies below 3 MHz Part 7: Detailed specification for 8-position fixed and free connectors with universal mating characteristics of assessed quality
- JB/T 4703-2000 Long neck butt welding flange
- JT/T 1286-2020 Manufacturing practice for transferred unitized cargo of air-ground intermodal transport
- JB/T 4328.10-1999 General technical requirements for ductile iron castings for electrical equipment
- JB/T 4280-1993 Medium frequency coreless induction furnace
- QB/T 2686-2005 Potato chips
- HG/T 3603-1999 m-Aminoacetanilide
- GB 16387-1996 Health standards for radiation workers
- GB 4706.17-1996 Special requirements for safety motors-compressors for household and similar electrical appliances
- SY/T 0315-1997 Technical standard for fusion bonded epoxy powder coating on steel pipelines
- GB/T 5021-2002 Commutator spacers and materials
- JB/T 993-1977 Welded bulkhead right angle pipe joint body
- GB/T 11381-1989 Passenger car top static load test method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com