JB/T 8022.2-1999 Adjustable centering internal expander for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8022.2-1999
- in force
Standard ID:
JB/T 8022.2-1999
Standard Name:
Adjustable centering internal expander for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 可调定心内涨器
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
Original standard number GB/T 12876-1991
Focal point Organization:
Mechanical Science Research InstitutePublishing Department:
State Machinery Industry Bureau
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8022.2-1999 This standard specifies adjustable centering internal expanders with specifications of 100~540mm. This standard was first issued in 1991 as GB/T 12876-91. JB/T 8022.2-1999 Adjustable centering internal expanders for machine tool fixture parts and components JB/T8022.2-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
Adjustable centering inner expansion-gear
The parts and units of jigs and fixturesVariable centering inner expansion-gearThis standard specifies adjustable centering inner expansion-gear with specifications of 100~540mm. 2 Dimensions
The dimensions are shown in the following figure and table.
3 Marking
3.1 Marking example:
D-300~540mm adjustable centering internal expander:
Internal expander
0JB/T8022.2—1999bzxZ.net
300~540
Approved by the State Machinery Industry Bureau on August 6, 1999JB/T 8022.2—1999
Implementation on January 1, 2000
100~180
>180~300
>300~540
JB/T 8022.21999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
Parts and units of jigs and fixtures
Adjustable centering inner expansion-gear
The parts and units of jigs and fixturesVariable centering inner expansion-gearThis standard specifies adjustable centering inner expansion-gear with specifications of 100~540mm. 2 Dimensions
The dimensions are shown in the following figure and table.
3 Marking
3.1 Marking example:
D-300~540mm adjustable centering internal expander:
Internal expander
0JB/T8022.2—1999bzxZ.net
300~540
Approved by the State Machinery Industry Bureau on August 6, 1999JB/T 8022.2—1999
Implementation on January 1, 2000
100~180
>180~300
>300~540
JB/T 8022.21999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 5273-1985 Terminal blocks for transformers, high voltage electrical appliances and bushings
- JB/T 8598-1997 Machine tool exchange gear shaft end fixing quick release ring
- GB 15342-1994 Talc
- GB 18078-2000 Standard for sanitary protection distances in meat processing plants
- GB 18054-2000 Health standard for benzo(a)pyrene in the air of residential areas
- GB/T 5301-1985 Safe picture areas for motion-picture films for television-Positions and dimensions
- GB/T 15638-1995 Specification for optical densitometric measurements of printed maps
- QB/T 2065-1994 Health scale
- JJG 130-1984 Liquid-in-Glass Thermometers for Working
- SJ 20799-2001 General specification for airborne power conversion equipment
- JJG 2082-1990 Measuring Instruments for Power Frequency Current Ratio
- GB/T 15929-1995 Test method for minimum ignition energy of dust cloud - Double-layer vibrating screen falling method (integrated calculation of energy)
- GB/T 28585-2012 Geographic information—Methodology for feature cataloguing
- GBZ 44-2002 Diagnostic criteria for occupational acute arsenic poisoning
- JB/T 2001.71-1999 Types and dimensions of hydraulic servomotors for water systems
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com