
Kilogram-force per square centimetre and megapascal conversion tables
time:
2024-08-10 15:07:23
- GB/T 4113-1983
- Abolished
Standard ID:
GB/T 4113-1983
Standard Name:
Kilogram-force per square centimetre and megapascal conversion tables
Chinese Name:
千克力每平方厘米与兆帕斯卡的相互换算表
Standard category:
National Standard (GB)
-
Date of Release:
1983-01-02 -
Date of Implementation:
1984-10-01 -
Date of Expiration:
2005-10-14
Standard ICS number:
01.060.10China Standard Classification Number:
General>>Measurement>>A51 Quantity and Unit
Release date:
1983-12-26Review date:
2004-10-14Drafting Organization:
National Bureau of MetrologyFocal point Organization:
National Technical Committee for Standardization of Quantities and UnitsPublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration

Skip to download
Summary:
GB/T 4113-1983 Conversion table between kilogram force per square centimeter and megapascal GB/T4113-1983 standard download decompression password: www.bzxz.net

Some standard content:
1 Introduction
National Standard of the People's Republic of China
Kilogram-force per square centimetre and megapascal conversion tables
UDC531.78.081
GB4113-83
1.1 This standard applies to all occasions where kilogram-force per square centimetre (kgf/cm2) is converted into megapascal (MPa) and megapascal is converted into kilogram-force per square centimetre.
The conversion tables in this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81, and the figures below 1 are rounded to four decimal places. If necessary, calculation and rounding shall be carried out according to the conversion factors given in 1.2. The rounding rules shall be in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83). 1.2 Conversion factor:
1kgf/cm2-0.0980665MPa
1MPa=1/0.0980665kgf/cm2
Wherein, 1MPa=10°Pa.
1.3 "Kilogram-force per square centimeter" is also called "engineering atmospheric pressure". The conversion between it and "bar" can be obtained by substituting the relationship "1bar=10°Pa=0.1MPa" into the given conversion factor. 2 Conversion table
Published by the National Bureau of Standards on December 26, 1983
Implemented on October 1, 1984
kgf/cm2Www.bzxZ.net
kgf/cm
GB4113—83
Table 1 Conversion table of kilogram-force per square centimeter to megapascal 1kgf/cm2=0.0980665MPa
kgf/cm||tt| |kgf/cm2
GB4113—83
Continued Table 1
kgf/cm2
GB4113—83
Conversion table 2 from megapascal to kilogram-force per square centimeter
1MPa=1/0.0980665kgf/cm
kgf/cm
GB4113—83
Continued Table 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Kilogram-force per square centimetre and megapascal conversion tables
UDC531.78.081
GB4113-83
1.1 This standard applies to all occasions where kilogram-force per square centimetre (kgf/cm2) is converted into megapascal (MPa) and megapascal is converted into kilogram-force per square centimetre.
The conversion tables in this standard are limited to general conversions. The converted figures in the conversion tables are rounded to five significant figures in accordance with the provisions of GB1.1-81, and the figures below 1 are rounded to four decimal places. If necessary, calculation and rounding shall be carried out according to the conversion factors given in 1.2. The rounding rules shall be in accordance with the provisions of GB1.1-81 (see Appendix A of GB4116-83). 1.2 Conversion factor:
1kgf/cm2-0.0980665MPa
1MPa=1/0.0980665kgf/cm2
Wherein, 1MPa=10°Pa.
1.3 "Kilogram-force per square centimeter" is also called "engineering atmospheric pressure". The conversion between it and "bar" can be obtained by substituting the relationship "1bar=10°Pa=0.1MPa" into the given conversion factor. 2 Conversion table
Published by the National Bureau of Standards on December 26, 1983
Implemented on October 1, 1984
kgf/cm2Www.bzxZ.net
kgf/cm
GB4113—83
Table 1 Conversion table of kilogram-force per square centimeter to megapascal 1kgf/cm2=0.0980665MPa
kgf/cm||tt| |kgf/cm2
GB4113—83
Continued Table 1
kgf/cm2
GB4113—83
Conversion table 2 from megapascal to kilogram-force per square centimeter
1MPa=1/0.0980665kgf/cm
kgf/cm
GB4113—83
Continued Table 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 18923-2002 Weight constraints for transport packages
- JB/T 8529-1997 Technical requirements for explosion-proof valve actuators
- GB/T 4656.1-2000 Simplified representation of bars, profiles and their cross-sections in technical drawings
- JB/T 7775.2-1995 Chemical composition of copper tungsten and tungsten carbide vacuum contact materials
- GB/T 10125-2012 Corrosion tests in artificial atmospheres—Salt spray tests
- GB 12837-1999 Large core cavity tire valve nozzle
- JB/T 10405-2004 Technical conditions for foundation and connection of off-grid wind turbine generator sets
- QB/T 2565.2-2002 钢斧 采伐斧
- JJF 1209-2008 Calibration Specification for Gear Pitch Measuring Instruments
- GBZ 68-2002 Diagnostic criteria for occupational benzene poisoning
- CH/T 2006-1999 The electronic data recording rules for leveling
- JB/T 6022.1-1992 Technical requirements for voltage regulators for magneto motors
- HG 2975-1989 Certificate for Preparation of Standard Mixtures for Gas Analysis
- GB/T 8937-1988 Edible lard
- SJ/T 10586.2-1994 Technical data of Type DW-211 electronic glass
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com